Abstract
In this study, MCQ (Micronized copper Quat) which was copper-based wood preservative, was investigated on decay properties by difference of the its infiltration volume. After pressure-treatment with different MCQ concentration, test specimens (Japanese Red Pine) were exposed by a brown-rot fungus (Fomitopsis palustris). At the end of the 12 weeks exposure to the fungus, untreated specimen was showed the mass loss of more than 35%, and the value of preservative effectiveness of MCQ by indoor decay was $3.99{\pm}0.42kg/m^3$. Therefore, MCQ should be pressure-injected at least $3.99kg/m^3$. The three dimensional of the specimens were observed by using the light microscope and scanning electron microscope, Untreated and treatment specimens with low concentration generally had underwent serious decays and had a lot of fungal hyphae. Howere, the formation of bore hole by hyphae were not observed. Mass loss and decay properties of specimens were affected by amount of MCQ injection. Therefore, it is necessary to the review of the adequacy of the MCQ injection amount in domestic environments.
구리 기반 목재 방부제 중 MCQ를 이용하여, 목재 내 주입량에 따른 부후 특성을 조사하였다. 목재 시편에 주입량을 달리하여 약제를 주입한 후, 갈색부후균인 부후개떡버섯에 의한 방부효력 시험을 진행하였다. 이후, 질량감소율을 측정한 결과 무처리재는 35% 이상의 질량감소율을 보였으며, 실내 부후에 의한 MCQ 약제의 방부 효력을 나타내는 주입량은 $3.99{\pm}0.42kg/m^3$로 나타났다. 광학현미경 및 전자현미경으로 시편의 3단면을 관찰했을 때, 무처리재와 낮은 주입량으로 처리한 처리재에서는 세포벽의 파괴와 함께 전체적으로 부후가 진행됨이 확인 되었고, 많은 수의 균사를 관찰할 수 있었지만, bore hole은 확인할 수 없었다. 본 연구에서 MCQ의 주입량에 따른 질량감소율 및 부후 현상이 크게 차이가 난 점 등을 고려하여, 국내 환경에서 MCQ의 주입량에 관한 적정성 검토가 필요하다고 생각되었다.