DOI QR코드

DOI QR Code

Design modification and structural behavior study of a CFRP star sensor baffle

  • Vinyas, M. (UBDTCE) ;
  • Vishwas, M. (Siddaganga Institute of Technology) ;
  • Venkatesha, C.S. (UBDTCE) ;
  • Rao, G. Srinivasa (ISRO)
  • 투고 : 2015.12.26
  • 심사 : 2016.04.12
  • 발행 : 2016.10.25

초록

Star sensors are the attitude estimation sensors of the satellite orbiting in its path. It gives information to the control station on the earth about where the satellite is heading towards. It captures the images of a predetermined reference star. By comparing this image with that of the one captured from the earth, exact position of the satellite is determined. In the process of imaging, stray lights are eliminated from reaching the optic lens by the mechanical enclosures of the star sensors called Baffles. Research in space domain in the last few years is mainly focused on increased payload capacity and reduction in launch cost. In this paper, a star sensor baffle made of Aluminium is considered for the study. In order to minimize the component weight, material wastage and to improve the structural performance, an alternate material to Aluminium is investigated. Carbon Fiber Reinforced Polymer is found to be a better substitute in this regard. Design optimisation studies are carried out by adopting suitable design modifications like implementing an additional L-shaped flange, Upward flange projections, downward flange projections etc. A better configuration of the baffle, satisfying the design requirements and achieving manufacturing feasibility is attained. Geometrical modeling of the baffle is done by using UNIGRAPHICS-Nx7.5(R). Structural behavior of the baffle is analysed by FE analysis such as normal mode analysis, linear static analysis, and linear buckling analysis using MSC/PATRAN(R), MSC-NASTRAN(R) as the solver to validate the stiffness, strength and stability requirements respectively. Effect of the layup sequence and the fiber orientation angle of the composite layup on the stiffness are also studied.

키워드

참고문헌

  1. Cannata, M.N., Greene, M.R., Mulligan, S.J. and Popovici, V. (2011), "Autonomous star-imaging attitude sensor (ASIAS)", Thesis, York University, NY.
  2. Chao, M., Sizhong, Z., Ming, M., Zhili, G. and Shimin, Z. (2011) "A new method of baffle design", Procedia Eng., 15, 4516-4520. https://doi.org/10.1016/j.proeng.2011.08.848
  3. Defise, J.M., Halain, J.P., Mazy, E., Rochus, P.P., Howard, R.A., Moses, J.D., ... & Simnett, G.M. (2002), "Design and test of heliospheric imager of the STEREO mission", Astronomical Telescopes and Instrumentation, International Society for Optics and Photonics.
  4. Guan, Y., Mu, D. and Li, Z. (2011), "Design and analysis of outer baffle of space telescope", Appl. Inform. Commun., 226, 477-485. https://doi.org/10.1007/978-3-642-23235-0_61
  5. Lin, Z.W., Liu, Y.Q., Liang, Y., Dong, P., Wang, M.Y. and Li, X.D. (2007), "Application of carbon fibre reinforce composite for space based to space optical structure", Opt. Precis. Eng., 15, 1181-1185.
  6. Mazy, E., Defise, J.M. and Plesseria, J.Y. (1996), "INTEGRAL optical monitoring camera stray-light design", Proceedings 2nd INTEGRAL workshop, The Transparent Universe, St Malo, France.
  7. Mohammadnejad, S. and Madineh, A.B. (2012) "Baffle simulation and design with the aim of use in space cameras", 8th IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing, July.
  8. Murray, B.W., Floyd, D.R. and Ulph Sr, E. (1991), "Light-absorbing, lightweight beryllium baffle materials", Proc. SPIE 1485, 88, Reflective and Refractive Optical Materials for Earth and Space Applications, Orlando, September.
  9. Pfeiffer, K. (2007), Ultra-Lightweight Optical Baffles out of CFRP, HPS GmbH Publications.
  10. Quaresimin, M., Ricotta, M., Martello, L. and Mian, S. (2012), "Energy absorption in composite laminates under impact loading", Compos. Part B, 44, 133-140.
  11. Samaan, M. and Theil, S. (2012), "Development of a low cost star tracker for the SHEFEX mission", Aerosp. Sci. Tech., 23, 469-478. https://doi.org/10.1016/j.ast.2011.09.013
  12. Sharma, A.K. (2012), "Stray light analysis of optical attitude sensors", IX Control Instrumentation System Conference (CISCON - 2012), 16-17.
  13. Xuezhi, J., Guang, J. and Lei, Z. (2008), "Design and optimization of lightweight outer baffle for space camera", Opt. Precis. Eng., 16, 1560-1564.
  14. Yan, Y., Song, G., Yuan, A. and Jin, G. (2011), "Optimum design of the carbon fiber thin-walled baffle for the space-based camera", Proc. SPIE 8196, International Symposium on Photoelectronic Detection and Imaging, June.
  15. Zeh, T., Gal, C., Kaiser, S., Peter, G., Walter, I., Helbert, J. and Jachlewski, J. (2008), "MERTIS-reflective baffle design and manufacturing", Proc. SPIE 7808, Infrared Remote Sensing and Instrumentation XVIII, 78080O.
  16. Zhang, L., Jia, X., Xie, P. and Xing, L. (2012), "Study on ultra-light secondary baffle for coaxial two mirror telescope", Proceedings of 2012 IEEE, International Conference on Mechatronics and Automation, Chengdu, August.
  17. Zhang, L., Yao, J., Jia, X. and Jin, G. (2011), "Research on lightweight outer baffle for coaxial space camera", International Conference on Electronic & Mechanical Engineering and Information Technology, August.
  18. Zhao, S.F., Wang, H.T., Wang, Y. and Ji, C.Y. (2012), "Space luminous environment adaptability of missile-borne star sensor", J. Cent. South Univ., 19, 3435-3443. https://doi.org/10.1007/s11771-012-1426-2