DOI QR코드

DOI QR Code

Enhanced Mechanical Properties of Functionalized Graphene Oxide/linear Low Density Polyethylene Composites Prepared by Melt Mixing

  • Chhetri, Suman (Surface Engineering & Tribology Division, Council of Scientific and Industrial Research-Central Mechanical Engineering Research Institute) ;
  • Samanta, Pranab (Surface Engineering & Tribology Division, Council of Scientific and Industrial Research-Central Mechanical Engineering Research Institute) ;
  • Murmu, Naresh Chandra (Surface Engineering & Tribology Division, Council of Scientific and Industrial Research-Central Mechanical Engineering Research Institute) ;
  • Kuila, Tapas (Surface Engineering & Tribology Division, Council of Scientific and Industrial Research-Central Mechanical Engineering Research Institute) ;
  • Lee, Joong Hee (Advanced Materials Research Institute for BIN Convergence Technology (BK Plus Global, Program), Department of BIN Convergence Technology, Chonbuk National University)
  • Received : 2016.08.16
  • Accepted : 2016.08.30
  • Published : 2016.08.31

Abstract

Graphene oxide (GO) was concurrently reduced and functionalized using long alkyl chain dodecyl amine (DA). The DA functionalized GO (DA-G) was assumed to disperse homogenously in linear low density polyethylene (LLDPE). Subsequently, DA-G was used to fabricate DA-G/LLDPE composites by melt mixing technique. Fourier transform infrared spectra analysis was performed to ascertain the simultaneous reduction and functionlization of GO. Field emission scanning electron microscopy analysis was performed to ensure the homogenous distribution and dispersion of DA-G in LLDPE matrix. The enhanced storage modulus value of the composites validates the homogenous dispersion of DA-G and its good interfacial interaction with LLDPE matrix. An increased in tensile strength value by ~ 64% also confirms the generation of good interface between the two constituents, through which efficient load transfer is possible. However, no significant improvement in glass transition temperature was observed. This simple technique of fabricating LLDPE composites following industrially viable melt mixing procedure could be realizable to developed mechanically strong graphene based LLDPE composites for future applications.

Keywords

References

  1. Rafiee M.A., Rafiee, J., Wang, Z., Song, H., Yu, Z.Z., and Koratkar, N., "Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content," ACS Nano, Vol. 3, No.12, 2009, pp. 3884-3890. https://doi.org/10.1021/nn9010472
  2. Chhetri, S., Samanta, P., Murmu N.C., Srivastava, S.K., and Kuila, T., "Effect of Dodecyal Amine Functionalized Graphene on the Mechanical and Thermal Properties of Epoxy-based Composites," Polymer Engineering and Science, 2016 (In Press) DOI 10.1002/pen.24355.
  3. Kim, S., Do, I., and Drzal, L.T., "Multifunctional xGnP/LLDPE Nanocomposites Prepared by Solution Compounding Using Various Screw Rotating Systems," Macromolecular Material and Engineering, Vol. 3, No. 294, 2009, pp. 196-205.
  4. Kuila, T., Bose, S., Khanra, P., Kim, N.H., Rhee, K.Y., and Lee, J.H., "Characterization and Properties of in situ Emulsion Polymerized Poly(methyl methacrylate)/graphene Nanocomposites," Composites Part A, Vol. 42, No. 11, 2011, pp. 1856-1861. https://doi.org/10.1016/j.compositesa.2011.08.014
  5. Stankovich, S., Piner, R.D., Nguyen, S.T., and Ruoff, R.S., "Synthesis and Exfoliation of Isocyanate-treated Graphene Oxide Nanoplatelets," Carbon, Vol. 44, No. 15, 2006, pp. 3342-3347. https://doi.org/10.1016/j.carbon.2006.06.004
  6. Kuila, T., Bose, S., Hong, C.E., Uddin, Md E., Khanra, P., Kim, N.H., and Lee, J.H., "Preparation of Functionalized Graphene/ linear Low Density Polyethylene Composites by a Solution Mixing Method," Carbon, Vol. 49, No. 3, 2011, pp. 1033-1051. https://doi.org/10.1016/j.carbon.2010.10.031
  7. Bourlinos, A.B., Gournis, D., Petridis, D., Szabo, T., Szeri, A., and Dekany, I., "Graphite Oxide: Chemical Reduction to Graphite and Surface Modification with Primary Aliphatic Amines and Amino Acids," Langmuir, Vol. 19, No. 15, 2003, pp. 6050-6055. https://doi.org/10.1021/la026525h
  8. Wang, J.Y., Yang, S.Y., Huang, Y.L., Tien, H.W., Chin, W.K., and Ma, C.C.M., "Preparation and Properties of, Graphene Oxide/polyimide Composite Films with Low Dielectric Constant and Ultrahigh Strength via in situ Polymerization," Journal of Material Chemistry, Vol. 21, No. 35, 2011, pp 13569-13575. https://doi.org/10.1039/c1jm11766a
  9. Xu, Y., Liu, Z., Zhang, X., Wang, Y., Tian, J., Huang, Y., Ma, Y., Zhang, X., and Chen, Y., "Graphene Hybrid Material Covalently Functionalized with Porphyrin: Synthesis and Optical Limiting Property," Advanced Material, Vol. 21, No. 12, 2009, pp. 1275-1279. https://doi.org/10.1002/adma.200801617
  10. Stankovich, S., Dikin, D.A., Dommett G.H.B., Kohlhaas, K.M., Zimney, Eric, J., Stach, Eric A., Piner, R. D., Nguyen, Son B.T., and Ruoff, R.S., "Graphene-based Composite Materials," Nature, Vol. 442, 2006, pp. 282-286. https://doi.org/10.1038/nature04969
  11. Jang, J., Pham, V.H., Rajagopalan, B., Hur, S.H., and Chung, J.S., "Effects of the Alkylamine Functionalization of Graphene Oxide on the Properties of Polystyrene Nanocomposites," Nanoscale Research Letters, Vol. 9, No. 1, 2014, pp. 265. https://doi.org/10.1186/1556-276X-9-265
  12. Kim, N.H., Kuila, T., and Lee, J.H., "Simultaneous Reduction, Functionalization and Stitching of Graphene Oxide with Ethylenediamine for Composites Application," Journal Material Chemistry A, Vol. 1, No. 4, 2013, pp. 1349-1358. https://doi.org/10.1039/C2TA00853J
  13. Jana, M., Khanra, P., Murmu, N.C., Samanta, P., Lee, J.H., and Kuila T., "Covalent Surface Modification of Chemically Derived Graphene and Its Application as Supercapacitor Electrode Material," Physical Chemistry and Chemical Physics, Vol. 16, 2014, pp. 7618-7626. https://doi.org/10.1039/c3cp54510e
  14. Kuila, T., Bose, S., Mishra, A.K., Khanra, P., Kim, N.H., and Lee, J.H., "Effect of Functionalized Graphene on the Physical Properties of Linear Low Density Polyethylene Nanocomposites," Polymer Testing, Vol. 31, No. 1, 2012, pp. 31-38. https://doi.org/10.1016/j.polymertesting.2011.09.007

Cited by

  1. Surface functionalization of graphene oxide with octadecylamine for improved thermal and mechanical properties in polybutylene succinate nanocomposite 2017, https://doi.org/10.1007/s00289-017-2217-6
  2. Interface engineering for the improvement of mechanical and thermal properties of covalent functionalized graphene/epoxy composites vol.135, pp.15, 2018, https://doi.org/10.1002/app.46124
  3. Experimental and Finite Element Analysis of Free Vibration Behaviour of Graphene Oxide Incorporated Carbon Fiber/Epoxy Composite vol.31, pp.6, 2016, https://doi.org/10.7234/composres.2018.31.6.311