Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

Quality of High Volume Blast Furnace Slag Mortar Depending on Desulfurization Gypsum Treating Methods and Fine Aggregate Type

탈황석고의 가공법 및 잔골재종류 변화에 따른 고로슬래그 미분말 다량 치환 모르타르의 품질 특성

  • Han, Cheon-Goo (Department of Architectural Engineering, Cheongju University) ;
  • Lee, Dong-Yun (Department of Architectural Engineering, Cheongju University)
  • Received : 2016.05.23
  • Accepted : 2016.06.10
  • Published : 2016.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this research, based on the condition of using desulfurization gypsum(FGD) as a stimulator for high-volume blast furnace slag cement mortar, sieving and heating process methods of removing activated carbon in FGD were compared with the non-processed FGD and recycled and natural fine aggregates were compared for suitable aggregate to be used. According to the result of experiment, sieving with 0.3mm was more efficient than $500^{\circ}C$ heating for processing the FGD, and recycled fine aggregate showed more favorable result than natural fine aggregate at the FGD content was 5 to 10%. On the other hand, the mortar mixture including recycled fine aggregate had a high drying shrinkage, and absorption ratio, and thus specific limitations on applying recycled fine aggregate should be required.

본 연구에서는 고로슬래그 미분말 다량 치환한 시멘트 모르타르의 자극재로 탈황석고(FGD)를 사용한 경우, FGD에 포함되어 있는 활성탄의 제거로 체가름방법과 고온가열 조건을 원분과 비교하고, 또한 골재로서 순환골재(RFA)와 천연골재(NFA)를 사용하는 골재종류 변화 조건에서 각종 품질특성을 검토하였다. 실험결과 FGD의 활성탄 제거방법은 $500^{\circ}C$ 고온가열보다 0.3mm 체가름법이 우수하였고, FGD 치환율은 5~10%일 때, 잔골재는 NFA보다 RFA에서 비교적 양호한 결과를 얻을 수 있었다. 그러나 RFA를 이용한 모르타르의 경우는 실무 활용시 건조수축 길이변화율 및 흡수율 측면에서는 용도제한 및 별도의 품질향상 대책이 요구되었다.

Keywords

References

  1. Baek, B.H., Han, C.G. (2014). Effect of caloium sulfate dihydrate(gypsum) on the fundamental properties of slagbased mortar, Journal of The Korean Institute of Building Construction, 14(3), 252-258 [in Korean]. https://doi.org/10.5345/JKIBC.2014.14.3.252
  2. Baek, B.H., Han, C.G. (2015). Improving quality of eco-mortar incorporating blast furnace slag and recycled aggregate depending on replacement gypsum and cemen, Journal of the Korea Institute of Building Construction, 15(2), 193-199 [in Korean]. https://doi.org/10.5345/JKIBC.2015.15.2.193
  3. Han, C.G. (2012). Quality Control of Ready Mixed Concrete, Kimoondang, Korea, 55-86 [in Korean].
  4. Han, C.G., Kim, J.B. (2011). Development of admixture for PHC pile concrete using anhydrite and blast furnace slag powder, Journal of the Architectural Institute-Structural, 27(8), 123-130 [in Korean].
  5. Huang, Y.S., La, W., Lee, S.H., Ryu, H.G., Han, C.G. (2003). "Influence of chemical admixture on the strength development of concrete at early age" , Proceedings of the Korea Concrete Institute, Chungju-si, Korea, 5, 741-744 [in Korean].
  6. Kim, S.H., Son, H.J., Pei, C.C., Han, M.C., Baek, J.H., Han, C.G. (2008). "Properties of high performance concrete corresponding to the replacement ratio of the blast furnace slag" , Proceedings of the Korea Concrete Institute, Ilsan-si, Korea, 41(2), 669-672 [in Korean].
  7. Kim, Y.H., Han, C.G., Lee, H.J. (2013). Effect of recycled fine aggregate powder and OPC on the strength gain properties of mortar using blast furnace slag powder and natural aggregates, Journal of the Architectural Institute - Structural, 29(3), 81-88 [in Korean].
  8. Lu, L.L., Baek, B.H., Han, C.G. (2014). Improving quality of eco-friendly mortar using blast furnace slag and recycled aggregate depending on replacement ratio of desulfurized gypsum, Journal of the Korea Institute of Building Construction, 14(2), 148-149 [in Korean].
  9. Park, K.T., Son, S.H., Han, C.G. (2010). Quality properties of zero cement blast furnace slag mortar using the recycled fine aggregates depending on mixing factors, Journal of the Korean Recycled Construction Resources Institute, 5(3), 69-77 [in Korean].
  10. Song, Y.L., Moon, B.Y., Lee, D.Y., Han, M.C., Han, C.G. (2016). "Effect of the desulfurized plaster replacement ratio on the quality of mortar using blast furnace slag powder and cyclic aggregate" , Proceedings of the Korea Architectural Institute, Seoul-si, Korea, 36(1), 341-342 [in Korean].