References
- B. Gates, Q. Xu, M. Stewart, D. Ryan, C. Willson, and G. Whitesides, "New approaches to nanofabrication: Molding, printing, and other techniques", Chem. Rev., 105, 1171 (2005). https://doi.org/10.1021/cr030076o
- J. L. Snyder, A. Clark Jr., D. Z. Fang, T. R. Gaborski, C. C. Striemer, P. M. Fauchet, and J. L. McGrath, "An experimental and theoretical analysis of molecular separations by diffusion through ultrathin nanoporous membranes", J. Membr. Sci., 369, 119 (2011). https://doi.org/10.1016/j.memsci.2010.11.056
- H. U. Osmanbeyoglu, T. B. Hur, and H. K. Kim, "Thin alumina nanoporous membranes for similar size biomolecule separation", J. Membr. Sci., 343, 1 (2009). https://doi.org/10.1016/j.memsci.2009.07.027
- S. W. Kang, "Review on facilitated olefin transport membranes utilizing polymer electrolytes and polymer nanocomposites", Membr. J., 26, 38 (2016). https://doi.org/10.14579/MEMBRANE_JOURNAL.2016.26.1.38
- A. Mozalev, S. Magaino, and H. Imai, "The formation of nanoporous membranes from anodically oxidized aluminium and their application to Li rechargeable batteries", Electrochim. Acta, 46, 2825 (2001). https://doi.org/10.1016/S0013-4686(01)00497-2
- Y. S. Jeon and J. W. Rhim, "Preparation and performance of composite membrane prepared by layer- by-layer coating method", Membr. J., 25, 538 (2016).
- S. Letant, T. van Buuren, and L. Terminello, "Nanochannel arrays on silicon platforms by electrochemistry", Nano Lett., 4, 1705 (2004). https://doi.org/10.1021/nl049111c
- H. Tong, H. Jansen, V. Gadgil, C. Bostan, E. Berenschot, C. van Rijn, and M. Elwenspoek, "Silicon nitride nanosieve membrane", Nano Lett., 4, 283 (2004). https://doi.org/10.1021/nl0350175
- C. C. Striemer, T. R. Gaborski, J. L. McGrath, and P. M. Fauchet, "Charge- and size-based separation of macromolecules using ultrathin silicon membranes", Nature, 445, 749 (2007). https://doi.org/10.1038/nature05532
- H. Lira and R. Paterson, "New and modified anodic alumina membranes - Part III. Preparation and characterisation by gas diffusion of 5 nm pore size anodic alumina membranes", J. Membr. Sci., 206, 375 (2002). https://doi.org/10.1016/S0376-7388(01)00782-7
- A. Yamaguchi, F. Uejo, T. Yoda, T. Uchida, Y. Tanamura, T. Yamashita, and N. Teramae, "Self-assembly of a silica-surfactant nanocomposite in a porous alumina membrane", Nat. Mater., 3, 337 (2004). https://doi.org/10.1038/nmat1107
- S. S. Penumetcha, R. Kona, J. L. Hardin, A. L. Molder, and E. D. Steinle, "Monitoring transport across modified nanoporous alumina membranes", Sensors, 7, 2942 (2007). https://doi.org/10.3390/s7112942
- I. Vlassiouk, A. Krasnoslobodtsev, S. Smirnov, and M. Germann, ""Direct" detection and separation of DNA using nanoporous alumina filters", Langmuir, 20, 9913 (2004). https://doi.org/10.1021/la047959a
- M. Lillo and D. Losic, "Pore opening detection for controlled dissolution of barrier oxide layer and fabrication of nanoporous alumina with throughhole morphology", J. Membr. Sci., 327, 11 (2009). https://doi.org/10.1016/j.memsci.2008.11.033
- T. Xu, R. Piner, and R. Ruoff, "An improved method to strip aluminum from porous anodic alumina films", Langmuir, 19, 1443 (2003). https://doi.org/10.1021/la0264724
- Y. Zhao, M. Chen, Y. Zhang, T. Xu, and W. Liu, "A facile approach to formation of through-hole porous anodic aluminum oxide film", Mater. Lett., 59, 40 (2005). https://doi.org/10.1016/j.matlet.2004.09.018
- J. Schneider, N. Engstler, K. Budna, C. Teichert, and S. Franzka, "Freestanding, highly flexible, large area, nanoporous alumina membranes with complete through-hole pore morphology", Eur. J. Inorg. Chem., 2005, 2352 (2005). https://doi.org/10.1002/ejic.200401046
- C. Y. Han, G. A. Willing, Z. Xiao, and H. H. Wang, "Control of the anodic aluminum oxide barrier layer opening process by wet chemical etching", Langmuir, 23, 1564 (2007). https://doi.org/10.1021/la060190c
- G. D. Sulka, A. Brzozka, L. Zaraska, and M. Jaskula, "Through-hole membranes of nanoporous alumina formed by anodizing in oxalic acid and their applications in fabrication of nanowire arrays", Electrochim. Acta, 55, 4368 (2010). https://doi.org/10.1016/j.electacta.2010.01.048
- J. Cui, Y. Wu, Y. Wang, H. Zheng, G. Xu, and X. Zhang, "A facile and efficient approach for pore-opening detection of anodic aluminum oxide membranes", Appl. Surf. Sci., 258, 5305 (2012). https://doi.org/10.1016/j.apsusc.2012.01.099
- S. A. Yang, Y. C. Choi, and S. D. Bu, "Effects of etching time on the bottom surface morphology of ultrathin porous alumina membranes for use as masks", J. Korean Phys. Soc., 61, 1660 (2012). https://doi.org/10.3938/jkps.61.1660
- H. Han, S. Park, J. S. Jang, H. Ryu, K. J. Kim, S. Baik, and W. Lee, "In situ determination of the pore opening point during wet-chemical etching of the barrier layer of porous anodic aluminum oxide: Nonuniform impurity distribution in anodic oxide", ACS Appl. Mater. Interfaces, 5, 3441 (2013). https://doi.org/10.1021/am400520d
- H. Leese and D. Mattia, "Electroosmotic flow in nanoporous membranes in the region of electric double layer overlap", Microfluid. Nanofluid., 16, 711 (2014). https://doi.org/10.1007/s10404-013-1255-0
- A. Santos, L. Vojkuvka, J. Pallares, J. Ferre- Borrull, and L. F. Marsal, "In situ electrochemical dissolution of the oxide barrier layer of porous anodic alumina fabricated by hard anodization", J. Electroanal. Chem., 632, 139 (2009). https://doi.org/10.1016/j.jelechem.2009.04.008
- J. Liu, S. Liu, H. Zhou, C. Xie, Z. Huang, C. Fu, and Y. Kuang, "Preparation of self-ordered nanoporous anodic aluminum oxide membranes by combination of hard anodization and mild anodization", Thin Solid Films, 552, 75 (2014). https://doi.org/10.1016/j.tsf.2013.12.023
- I. Vrublevsky, V. Parkoun, V. Sokol, and J. Schreckenbach, "Study of chemical dissolution of the barrier oxide layer of porous alumina films formed in oxalic acid using a re-anodizing technique", Appl. Surf. Sci., 236, 270 (2004). https://doi.org/10.1016/j.apsusc.2004.04.030
- J. Oh and C. V. Thompson, "Selective barrier perforation in porous alumina anodized on substrates", Adv. Mater., 20, 1368 (2008). https://doi.org/10.1002/adma.200701719
- T. Xu, G. Zangari, and R. Metzger, "Periodic holes with 10 nm diameter produced by grazing Ar+ milling of the barrier laver in hexagonally ordered nanoporous alumina", Nano Lett., 2, 37 (2002). https://doi.org/10.1021/nl010075g
- W. Chen, J. Wu, J. Yuan, X. Xia, and X. Lin, "An environment-friendly electrochemical detachment method for porous anodic alumina", J. Electroanal. Chem., 600, 257 (2007). https://doi.org/10.1016/j.jelechem.2006.10.022
- J. Yuan, F. He, D. Sun, and X. Xia, "A simple method for preparation of through-hole porous anodic alumina membrane", Chem. Mat., 16, 1841 (2004). https://doi.org/10.1021/cm049971u
- L. Gao, P. Wang, X. Wu, S. Yang, and X. Song, "A new method detaching porous anodic alumina films from aluminum substrates", J. Electroceram., 21, 791 (2008). https://doi.org/10.1007/s10832-007-9314-0
- A. Brudzisz, A. Brzozka, and G. D. Sulka, "Effect of processing parameters on pore opening and mechanism of voltage pulse detachment of nanoporous anodic alumina", Electrochim. Acta, 178, 374 (2015). https://doi.org/10.1016/j.electacta.2015.08.005
- J. H. Yuan, W. Chen, R. J. Hui, Y. L. Hu, and X. H. Xia, "Mechanism of one-step voltage pulse detachment of porous anodic alumina membranes", Electrochim. Acta, 51, 4589 (2006). https://doi.org/10.1016/j.electacta.2005.12.044
- A. Li, F. Muller, A. Birner, K. Nielsch, and U. Gosele, "Hexagonal pore arrays with a 50-420 nm interpore distance formed by self-organization in anodic alumina", J. Appl. Phys., 84, 6023 (1998). https://doi.org/10.1063/1.368911
- G. Ding, M. Zheng, W. Xu, and W. Shen, "Fabrication of controllable free-standing ultrathin porous alumina membranes", Nanotechnology, 16, 1285 (2005). https://doi.org/10.1088/0957-4484/16/8/050
- O. Jessensky, F. Muller, and U. Gosele, "Self-organized formation of hexagonal pore arrays in anodic alumina", Appl. Phys. Lett., 72, 1173 (1998). https://doi.org/10.1063/1.121004
- O. Jessensky, F. Muller, and U. Gosele, "Self-organized formation of hexagonal pore structures in anodic alumina", J. Electrochem. Soc., 145, 3735 (1998). https://doi.org/10.1149/1.1838867
- H. Masuda, F. Hasegwa, and S. Ono, "Self-ordering of cell arrangement of anodic porous alumina formed in sulfuric acid solution", J. Electrochem. Soc., 144, L127 (1997). https://doi.org/10.1149/1.1837634
- H. Masuda, K. Yada, and A. Osaka, "Self-ordering of cell configuration of anodic porous alumina with large-size pores in phosphoric acid solution", Jpn. J. Appl. Phys. Part 2 - Lett., 37, L1340 (1998). https://doi.org/10.1143/JJAP.37.L1340
- A. Li, F. Muller, A. Birner, K. Nielsch, and U. Gosele, "Hexagonal pore arrays with a 50-420 nm interpore distance formed by self-organization in anodic alumina", J. Appl. Phys., 84, 6023 (1998). https://doi.org/10.1063/1.368911
- H. Masuda and K. Fukuda, "Ordered Metal Nanohole Arrays made by a 2-Step Replication of Honeycomb Structures of Anodic Alumina", Science, 268, 1466 (1995). https://doi.org/10.1126/science.268.5216.1466
- K. Terao and J. Mays, "On-line measurement of molecular weight and radius of gyration of polystyrene in a good solvent and in a theta solvent measured with a two-angle light scattering detector", Eur. Polym. J., 40, 1623 (2004). https://doi.org/10.1016/j.eurpolymj.2004.03.010