DOI QR코드

DOI QR Code

반도체 소자를 이용한 테슬라 코일의 설계 및 제작

A Study on Design and Implementation of the Tesla Coil using Semiconductor Device

  • Kim, Young-Sun (Dept. of Electrical and Electronic Engineering, Joongbu University) ;
  • Kim, Dong-Jin (School of Electronics and Electrical Engineering, Dankook University) ;
  • Lee, Ki-Sik (School of Electronics and Electrical Engineering, Dankook University)
  • 투고 : 2016.07.28
  • 심사 : 2016.08.12
  • 발행 : 2016.09.01

초록

A Tesla coil is an electrical resonant transformer circuit invented by Nikola Tesla in 1891. It is used to produce high-voltage, low-current, high frequency alternating-current electricity. Tesla coil can generate a long streamer with several million volts of electricity as a high voltage device. It is basically consists of a voltage transformer, high voltage capacitor, spark gap, primary coil, secondary coil and toroid. It is difficult to appear in the output size of the streamer is controlled by the spark gap. The general decision method of the length of streamer is to display the electric output in accordance with the design specifications in initial development plan. Design specifications and the electric output is determined by the application of facilities. In this paper the spark gap is replaced with periodic switching semiconductor device to control output voltage easily in order to apply overvoltage protective circuit due to a secondary coil and a performance test. In these days, their main use is for entertainment and educational displays of the museum, although small coils are still used as leak detectors for high vacuum systems.

키워드

참고문헌

  1. Denicolai, Marco. Tesla transformer for experimentation and research. Helsinki University of Technology, 2001.
  2. Mitch Tilbury, "The ultimate Tesla Coil Design and construction guide", McGraw-Hill, 2008.
  3. Johnson, "Gary L. Solid State Tesla Coil" GL Johnson, 2001.
  4. Richard Miles Craven, "A study of secondary winding designs for the two-coil Tesla Transformer", Loughborough University Institutional Repository, 2014.
  5. Fritz, T., "Modeled and Actual Voltage and Current Waveforms within a Tesla Coil", http://www.capturedlightning.org/hot-streamer/TeslaCoils/MyPapers/modact/modact.html
  6. M. B. Farriz, A. Din, A. A. Rahman, M. S. Yahaya, J. M. Herman, "A Simple Design of a Mini Tesla Coil With DC Voltage Input", 2010 International Conference on Electrical and Control Engineering, 2010.
  7. Johnson, Gary L. "Building the world's largest Tesla coilhistory and theory." Power Symposium 1990, Proceedings of the Twenty-Second Annual North American. IEEE, 1990.
  8. Kolchanova, V. A. "Computational modeling of the Tesla coil parameters." Modern Technique and Technologies, 2002. MTT 2002. Proceedings of the 8th International Scientific and Practical Conference of Students, Postgraduates and Young Scientists. IEEE, 2002.
  9. Richard M. Craven, Ivor R. Smith, and Bucur M. Novac, "Optimizing the Secondary Coil of a Tesla Transformer to Improve Spectral Purity, IEEE Trans. on Plasma Science, Vol. 42, No. 1, pp. 143-48, 2014. https://doi.org/10.1109/TPS.2013.2290763