References
- Cho, S. M., Lee, D. Y., Kim, L. S., Cho, S. P., and Lyu, S. K., "A Study on Optimization of Tooth Micro-geometry for Wind Turbine High Speed Stage Helical Gear Pair", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13 No. 5, pp. 15-20, 2014 https://doi.org/10.14775/ksmpe.2014.13.5.015
- Kim, S. W., and Kim, H. G., "Technology Development Trends for High Altitude Wind Power Genration", Journal of the Korean Solar Energy Society, Vol. 30, No. 1, pp. 19-24, 2010.
- Canale, M., Fagiano, L., Ippolito, M., M. Milanese, M., "Control of tethered airfoils for a new class of wind energy generator", Proceedings of the 45th IEEE Conference on Decision & Control, pp. 4020-4026, 2006.
- Canale, M., Fagiano, L., Milanese, M., "Power Kites for Wind Energy Generation", IEEE Control Systems Magazine, Vol. 27, No. 6, pp. 25-38, 2007. https://doi.org/10.1109/MCS.2007.909465
- Ahmed, M., Hably, A., and Bacha, S., "Power maximization of a closed-orbit kite generator system." 50th IEEE Conference on Decision and Control and European Control Conference, pp. 7717-7722, 2011.
- Grauers, A., 'Design of Direct-driven Permanent-magnet Generators for Wind Turbines', A Dissertation for a Doctroal Degree, Chalmers University of Technology, 1996.
- Chung, D. W., You, Y. M., "Cogging Torque Reduction in Permanent-Magnet Brushless Generators for Small Wind Turbines", Journal of Magnetics, Vol. 20, No. 2, pp. 176-185, 2015. https://doi.org/10.4283/JMAG.2015.20.2.176
- Jang S. M., Choi, J. Y., Lee, S. H., "Reduction and Analysis for Cogging Torque of Permanent Magnet Synchronous Generators with Multi-Pole Rotor for Wind Power Application", The Transactions of The Korean Institute of Electrical Engineers, Vol. 57, No. 3, pp. 375-383, 2008.
- Choi, M. S., Chang, Y. H., Park, T. S., Jeong, M. S., and Moon, C. J., "A Study on Rotor Eddy Current Loss and Thermal Analysis of PM Synchronous Generator for Wind Turbine", The Transactions of the Korean Institute of Electrical Engineers, Vol. 63, No. 11, pp. 1575-1581, 2014. https://doi.org/10.5370/KIEE.2014.63.11.1575
- Hur, K. D., and Ye, S. D., "Design of Neodymium Permanent Magnetic Core using FEM", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13 No. 5, pp. 70-75, 2014. https://doi.org/10.14775/ksmpe.2014.13.5.070
- Seok, N. K., Cho S., G., and Kim, J., B., "Current Status and Research Trend of Rare-earth Permanent Magnet", Journal of the Korean Magnetics Society, Vol. 22, No. 6, pp. 221-227, 2012 https://doi.org/10.4283/JKMS.2012.22.6.221
- Kim, S. R., Lee, S. H., Jeong, H. J., Kim, K. H., and Park, S. J., "A New Distributed Resources Monitoring System based TCP/IP using LabVIEW", Power Electronics Annual Conference, pp. 525-527, 2009.