Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Effect Analysis of Carrier Pinhole Position Error on the Load Sharing of Planetary Gear

캐리어의 핀홀 위치 오차가 유성기어의 하중 분할에 미치는 영향 분석

  • Received : 2016.05.09
  • Accepted : 2016.05.27
  • Published : 2016.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Planetary gear sets are widely used in power transmission components, which have high efficiency and good durability. Their most important design parameter is the load-sharing characteristics among several planetary gears. In this study, the load sharing of planetary gears was analyzed according to the carrier pinhole position error of planetary gear sets. The loads acting on planetary gears varied with the pinhole position error of the carrier, and the load sharing of planetary gears improved as the input load increased. In addition, the load of the planetary gear with a carrier pinhole position error was relatively higher than that of other planetary gears without carrier pinhole position errors. This trend appeared more clearly in the non-floating-type carrier than the floating-type carrier.

Keywords

References

  1. American Gear Manufacturers Association (AGMA), "Design Manual for Enclosed Epicyclic Gear Drives," ANSI/AGMA 6123-B06, 2006.
  2. Kahraman, A., "Load Sharing Characteristics of Planetary Transmissions," Mechanism and Machine Theory, Vol. 29, No. 8, pp. 1151-1165, 1994. https://doi.org/10.1016/0094-114X(94)90006-X
  3. Kahraman, A., "Static Load Sharing Characteristics of Transmission Planetary Gear Sets: Model and Experiment," SAE Paper No. 1999-01-1050, 1999.
  4. Bodas, A., and Kahraman, A., "Influence of Carrier and Gear Manufacturing Errors on the Static Load Sharing Behavior of Planetary Gear Sets," JSME International Journal Series C, Vol. 47, No. 3, pp. 908-915, 2004. https://doi.org/10.1299/jsmec.47.908
  5. Singh, A., "Application of a System Level Model to Study the Planetary Load Sharing Behavior," Journal of Mechanical Design, Vol. 127, No. 3, pp. 469-476, 2005. https://doi.org/10.1115/1.1864115
  6. Kim, J. G., Lee, G. H., Park, Y. J., and Kim, J. H., "Effects of Bearing Internal Clearance on the Load Distribution and Load Sharing in the Pitch Reducer for Wind Turbines", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 22 No.1, pp. 29-35, 2013. https://doi.org/10.7735/ksmte.2013.22.1.29
  7. Kim, J. G., Park, Y. J., Lee, G. H., and Kim, J. H., "Effects of Bearing Characteristic on the Gear Load Distribution in the Slewing Reducer for Excavator", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13 No.5, pp. 8-14, 2014.
  8. Cho, S. J., Han, J. W., Park, Y. J., and Lee, G. H., "Structural Analysis of a Planetary Gear Carrier in the Slewing Reducer for Tower Crane", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13 No.5, pp. 1-7, 2014. https://doi.org/10.14775/ksmpe.2014.13.5.001
  9. Romax Technology Ltd, RomaxDesigner Software Manual, Nottngham, UK., 2003.
  10. International Organization for Standardization (ISO) 6336-(1:6), "Calculation of load capacity of spur and helical gears," ISO, Geneva, Switzerland, 2003-2007.

Cited by

  1. 항공기용 2단 차동 GRA 개발 vol.15, pp.6, 2016, https://doi.org/10.14775/ksmpe.2016.15.6.115
  2. 유성기어박스의 캐리어 핀홀 위치 오차의 위상에 따른 유성기어의 하중 분할 연구 vol.34, pp.6, 2016, https://doi.org/10.7736/kspe.2017.34.6.377
  3. 원격무장 고저 시스템용 사이클로이드 감속기 설계에 관한 연구 vol.34, pp.6, 2017, https://doi.org/10.7736/kspe.2017.34.6.405
  4. Simulation and Experimental Analysis for Noise Reduction of a Scooter Gearbox vol.35, pp.8, 2016, https://doi.org/10.7736/kspe.2018.35.8.777
  5. Simulation and Experimental Analysis for Noise Reduction of a Scooter Gearbox vol.35, pp.8, 2016, https://doi.org/10.7736/kspe.2018.35.8.777