참고문헌
- Kim, S. H. and Ahn, J. H., "Reducing the Non Grinding Time in Grinding Operations(2nd report) -Decision of Dressing Chance and Depth by the Direct Measurement of Grinding Wheel Surface-", Journal of the Korean Society for Precision Engineering, Vol. 14, No. 8, pp. 101-107, 1997.
- Wang, Y., Zhou, X. J., and Hu, D. J., "An Experimental Investigation of Dry-electrical Discharge Assisted Truing and Dressing of Metal Bonded Diamond Wheel", International Journal of Machine Tools and Manufacture, Vol. 46, pp. 333-342, 2006. https://doi.org/10.1016/j.ijmachtools.2005.05.022
- Lu, Y. J., Xie, J., and Si, X. H., "Study on Micro-topographical Removals of Diamond Grain and Metal Bond in dry Electro-contact Discharge Dressing of Coarse Diamond Grinding Wheel", International Journal of Machine Tools and Manufacture, Vol. 88, pp. 118-130, 2015. https://doi.org/10.1016/j.ijmachtools.2014.09.008
- Sanchez, J. A., Pombo, I., Cabanes, I., Ortiz, R., and de Lacalle, L. L., "Electrical Discharge Truing of Metal-bonded CBN Wheels Using Single-point Electrode", International Journal of Machine Tools and Manufacture, Vol. 45, pp. 362-370, 2008.
- Kang, J. H. and Lee, J. K., "Study on the Surface Grinding Machining of Fine-ceramics with high Efficiency" Journal of the Korean Society for Precision Engineering, Vol. 7, No. 4, pp. 40-54, 1991.
- Lee, J. S., "A Study on the Truing of Diamond Wheel for Micro V-shaped Groove Grinding", Journal of the Korean Society for Precision Engineering, Vol. 22, No. 9, pp. 27-33, 2005.
- Xie, J., Xie, H. F., Luo, M. F., Tan, T. W. and Li, P., "Dry Electro-Contact Discharge Mutual-Wear Truing of Micro Diamond Wheel V-Tip for Precision Micro-Grinding", International Journal of Machine Tools and Manufacture, Vol. 66, pp. 44-51, 2012.
- Lee, H. Y., Kim, H. J., and Lee, S. H., "Evaluation of Discharge Current Employing Generalized Energy Method and Integral Ohm's Law Using Finite Element Method" The Transaction of the Korean Institute of Electrical Engineers, Vol. 60, pp. 357-361, 2010.
- Choi, J. Y. and Kim, K. H., "A Study on Relation Between Expansion and the Characteristics of Surface in the ED-Drilling", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 73-79, 2012.
- Kim, S. H. and Lim, H. S., "Development of Micro Milling EDM and Analysis of Machined Characteristics", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 1-7, 2011.