DOI QR코드

DOI QR Code

Structural Analysis of the Valve Block of a Swash Plate-Type Axial Piston Pump

사판식 축 피스톤 펌프 밸브블록의 구조 해석에 관한 연구

  • Received : 2016.03.20
  • Accepted : 2016.04.14
  • Published : 2016.06.30

Abstract

A swash plate-type piston pump is a device used to discharge hydraulic fluid as the volume generated through the piston moves in the direction of the slope by adjusting the angle of its swash plate. In addition, the valve block internalized in the pump includes a flow path for intake from outside, a flow path for discharge, and a pilot conduit line to control discharge pressure and flux. In this study, a numerical analysis is conducted to improve the cracking of the valve block generated during process testing, and the developed pump is evaluated.

Keywords

References

  1. Crandall, S. H., Lardner, T. J., Archer, R. R., Cook, N. H., and Dahl, N. C., An Introduction to the Mechanics of Solids, McGraw-Hill, 1978.
  2. SolidENG Co. Ltd., ABAQUS Fundamentals and Applications, Yeamoonsa, pp. 83-98, 2015.
  3. Han, M. S. and Cho, J. U., "Structural Safety Analysis on Bicycle Suspension Seat Post", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 72-81, 2012.
  4. V-ENG Co. Ltd., ABAQUS Tutorial for Beginners and Intermediate Users, BB-Media, pp. 197-213, 2013.
  5. Bannantine, J., Fundamentals of Metal Fatigue Analysis, Prentice Hall, 1990.
  6. Shin, J. M., Han, S. H., and Han, D. S., "Investigation of Stress Concentration and Fatigue Life of Axle Drive Shaft with Relief Groove", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 88-94, 2012.

Cited by

  1. A Study on Structural Improvement of the Swashplate Axial Piston Pump Valve Block (1) vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.069
  2. A Study on Structural Improvement of the Swashplate Axial Piston Pump Valve Block (2) vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.076
  3. 사판식 피스톤 펌프의 구조적 거동 해석에 관한 연구 vol.19, pp.3, 2016, https://doi.org/10.21289/ksic.2016.19.3.125
  4. 부동액에 따른 회주철 라이너의 캐비테이션 부식에 대한 연구 vol.16, pp.4, 2016, https://doi.org/10.14775/ksmpe.2017.16.4.076
  5. 군용 궤도류 궤도몸체 설계 방법론 연구 vol.17, pp.2, 2016, https://doi.org/10.14775/ksmpe.2018.17.2.077
  6. 차륜형 장갑차용 가변형 사판식 피스톤 펌프 케이스의 구조해석 및 설계검증에 관한 연구 vol.16, pp.2, 2016, https://doi.org/10.7839/ksfc.2019.16.2.043
  7. 경사 면 보정 장치의 구조 설계에 관한 연구 vol.20, pp.3, 2016, https://doi.org/10.14775/ksmpe.2021.20.03.033
  8. 선박 유압공급 장치용 사판식 유압 피스톤 펌프의 구조적 안정성에 관한 연구 vol.20, pp.4, 2021, https://doi.org/10.14775/ksmpe.2021.20.04.024