참고문헌
- USNRC, Final ReportdGeneric Aging Lessons Learned (GALL) Report, NUREG-1801, 2010.
- W.C. Moshier, C.M. Brown, Effect of cold work and processing orientation on stress corrosion cracking behavior of Alloy 600, Corrosion 56 (2000) 307-320. https://doi.org/10.5006/1.3287659
- R. Bandy, D. van Rooyen, Stress corrosion cracking of Inconel Alloy 600 in high temperature water-an update, Corrosion 40 (1984) 425-430. https://doi.org/10.5006/1.3593950
- Y. Yamamoto, M. Ozawa, K. Nakata, T. Tsuruta, M. Sato, T. Okabe, Evaluation of crack growth rate for alloy 600TT SG tubing in primary and faulted secondary water environments, in: Proc. of the 12th Int. Conf. on Environmental Degradation of Materials in Nuclear Power System-Water Reactors-TMS, 2005, pp. 1243-1252.
- ASME, ASME Boiler & Pressure Vessel Code, Section XI. Rules for Inservice Inspection of Nuclear Power Plant Components, 2007.
- P.M. Scott, An analysis of primary water stress corrosion cracking in PWR steam generators, in: Proc. of the Specialists Meeting on Operating Experience with Steam Generators. Brussels, Belgium, 1991, pp. 5-6.
- Z.S. Smialowska, R.B. Rebak, Stress corrosion cracking of alloy 600 in high-temperature aqueous solutions: influencing factors, mechanisms and models, in: Proc. of Conf. on Control of Corrosion on the Secondary Side of Steam Generators, Airlie, VA, 1995, pp. 223-257.
- J.S. Kim, E.J. Heo, J.Y. Jeon, Y.J. Kim, n investigation on multiple axial surface PWSCC growth behaviors in primary Alloy 600 components using the PWSCC initiation model and damage mechanics approach, in: Proceeding of the ASME 2014 Pressure Vessels and Piping Conference, PVP2014-28517, Anaheim, California, 2014.
- J.Y. Jeon, Y.J. Kim, J.S. Kim, Multiple axial surface PWSCC growth assessment of steam generator tube using the PWSCC initiation model and damage mechanics approach, Procedia Mater. Sci. 3 (2014) 811-816. https://doi.org/10.1016/j.mspro.2014.06.133
- EPRI, Stress Corrosion Cracking Initiation Model for Stainless Steel and Nickel Alloys, EPRI TR-1019032, 2009.
- EPRI, Validation of Stress Corrosion Cracking Initiation Model for Stainless Steel and Nickel Alloys, EPRI TR-1025121, 2012.
- J.Y. Jeon, Y.J. Kim, J.S. Kim, Computational simulation of cold work effect on PWSCC growth in Alloy 600TT steam generator, J. Mech. Sci. Technol. 30 (2016) 689-696. https://doi.org/10.1007/s12206-016-0125-6
- ABAQUS, ABAQUS Standard/User's Manual, Version 6.13, Dassault Systemes Inc., 2011.
- J. Newman, I. Raju, Stress-Intensity Factor Equations for Cracks in Three-Dimensional Finite Bodies Subjected to Tension and Bending Loads, NASA Technical Memorandum, 85793, 1984.
- H.S. Chung, H.D. Kim, Y.J. Oh, J.H. Baek, Y.P. Kim, A review on the ODSCC of steam generator tubes in Korean NPPs, Nucl. Eng. Technol. 45 (2011) 513-522.
- S.S. Hwang, Y.S. Lim, S.W. Kim, D.J. Kim, H.P. Kim, Role of grain boundary carbides in cracking behavior of Ni base Alloys, Nucl. Eng. Technol. 45 (2013) 73-80. https://doi.org/10.5516/NET.07.2012.013
- ASTM, Standard test method for measurement of fracture toughness, E1820-13.
피인용 문헌
- PWSCC initiation and propagation in a CRDM penetration nozzle vol.31, pp.11, 2016, https://doi.org/10.1007/s12206-017-1033-0
- Investigations on critical anisotropic triaxiality at the crack tip under mixed-mode (I + II) fracture vol.233, pp.13, 2019, https://doi.org/10.1177/0954406219827337