Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Bubbly, Slug, and Annular Two-Phase Flow in Tight-Lattice Subchannels

  • Prasser, Horst-Michael (ETH Zurich, Department of Mechanical and Process Engineering (D-MAVT)) ;
  • Bolesch, Christian (ETH Zurich, Department of Mechanical and Process Engineering (D-MAVT)) ;
  • Cramer, Kerstin (ETH Zurich, Department of Mechanical and Process Engineering (D-MAVT)) ;
  • Ito, Daisuke (ETH Zurich, Department of Mechanical and Process Engineering (D-MAVT)) ;
  • Papadopoulos, Petros (ETH Zurich, Department of Mechanical and Process Engineering (D-MAVT)) ;
  • Saxena, Abhishek (ETH Zurich, Department of Mechanical and Process Engineering (D-MAVT)) ;
  • Zboray, Robert (Paul Scherrer Institute, PSI)
  • Received : 2016.06.18
  • Accepted : 2016.06.20
  • Published : 2016.08.25
Download PDF
⟨ Previous Next ⟩

Abstract

An overview is given on the work of the Laboratory of Nuclear Energy Systems at ETH, Zurich (ETHZ) and of the Laboratory of Thermal Hydraulics at Paul Scherrer Institute (PSI), Switzerland on tight-lattice bundles. Two-phase flow in subchannels of a tight triangular lattice was studied experimentally and by computational fluid dynamics simulations. Two adiabatic facilities were used: (1) a vertical channel modeling a pair of neighboring sub-channels; and (2) an arrangement of four subchannels with one subchannel in the center. The first geometry was equipped with two electrical film sensors placed on opposing rod surfaces forming the subchannel gap. They recorded 2D liquid film thickness distributions on a domain of $16{\times}64$ measuring points each, with a time resolution of 10 kHz. In the bubbly and slug flow regime, information on the bubble size, shape, and velocity and the residual liquid film thickness underneath the bubbles were obtained. The second channel was investigated using cold neutron tomography, which allowed the measurement of average liquid film profiles showing the effect of spacer grids with vanes. The results were reproduced by large eddy simulation + volume of fluid. In the outlook, a novel nonadiabatic subchannel experiment is introduced that can be driven to steady-state dryout. A refrigerant is heated by a heavy water circuit, which allows the application of cold neutron tomography.

Keywords

References

  1. J. Yamashita, F. Kawamura, T. Mochida, Next-generation nuclear reactor systems for future energy, Hitachi Rev. 53 (3) (2004) 131-135.
  2. S. Uchikawa, T. Okubo, T. Kugo, H. Akie, R. Takeda, Y. Nakano, A. Ohunki, T. Iwamura, Conceptual design of innovativewater reactor for flexible fuel cycle (FLWR) and its recycle characteristics, J. Nucl. Sci. Technol. 44 (3) (2007) 277-284. https://doi.org/10.1080/18811248.2007.9711283
  3. Y. Fukaya, T. Okubo, S. Uchikawa, Investigation on spent fuel characteristics of reduced-moderation water reactor (RMWR), Nucl. Eng. Des 238 (2008) 1601-1611. https://doi.org/10.1016/j.nucengdes.2007.10.014
  4. W. Liu, A. Ohnuki, H. Yoshida, M. Kureta, K. Takase, H. Akimoto, Thermal feasibility analyses for the 1356MWe high conversion-type innovative water reactor for flexible fuel cycle, Heat Transfer Eng. 29 (8) (2008) 704-711. https://doi.org/10.1080/01457630801981614
  5. JAEA, Reduced-Moderation Water Reactor (RMWR), Status Report 80, release 04.04, JAEA., 2011. Available from: https://aris.iaea.org/sites/..%5CPDF%5CRMWR.pdf.
  6. R. Brogli, B. Kuczera, H. Moldaschl, W. Oldekop, Lessons learned from the PWHCR development, in: R. Chawla, R. Bohme, J. Dreier, R. Brogli, J. Axmann, H.D. Berger, C.H.M. Broeders, H. Hager, B. Kuczera, H. Moldaschl, W. Oldekop, S. Pelloni, N. Rouge, M. Schatz, R. Seiler, S. Yanar (Eds.), Contributions to Technical and Economic Aspects of High Converters, PSI-Bericht Nr. 71, Paul Scherrer Institut, June 1990, pp. 54-62.
  7. H. Tochihara, Y. Komano, M. Ishida, K. Narukawa, M. Umeno, Nuclear design for mixed moderator PWR, Prog. Nucl. Energ. 32 (314) (1998) 533-537. https://doi.org/10.1016/S0149-1970(97)00040-1
  8. D. Ito, M. Damsohn, H.-M. Prasser, M. Aritomi, Dynamic film thickness between bubbles and wall in a narrow channel, Exp. Fluids 51 (3) (2011) 821-833. Available from: http://link.springer.com/article/10.1007/s00348-011-1105-3.
  9. D. Ito, H.-M. Prasser, Measurement of two-phase flow structure in a narrow rectangular channel, in: G.U. Beltran, L.L. Castro Gomez (Eds.), Flow Measurement, InTech, 2012, pp. 73-94.
  10. M. Damsohn, H.-M. Prasser, High-speed liquid film sensor for two-phase flows with high spatial resolution based on electrical conductance, Flow Meas. Instrum. 20 (2009) 1-14. https://doi.org/10.1016/j.flowmeasinst.2008.06.006
  11. M. Damsohn, H.-M. Prasser, Experimental studies of the effect of functional spacers to annular flow in subchannels of a BWR fuel element, Nucl. Eng. Des. 240 (2010) 3126-3144. https://doi.org/10.1016/j.nucengdes.2010.05.032
  12. R. Zboray, J. Kickhofel, M. Damsohn, H.-M. Prasser, Coldneutron tomography of annular flow and functional spacer performance in a model of a boiling water reactor fuel rod bundle, Nucl. Eng. Des. 241 (2011) 3201-3215. https://doi.org/10.1016/j.nucengdes.2011.06.029
  13. D. Ito, H.-M. Prasser, Spatio-temporal measurement of liquid film thickness in tight-lattice double subchannels, The 15th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, NURETH-15, Pisa, Italy, May 12-17, 2013, Paper NURETH15-226. Available from: http://www.ans.org.
  14. P. Papadopoulos, Measurements in a Triangular Tight Lattice Channel with Mesh Sensors, Bachelor Thesis, ETH Zurich, Laboratory of Nuclear Energy Systems., 2011. Available from: hprasser@ethz.ch.
  15. R. Zboray, H.-M. Prasser, Neutron imaging of annular flows in a tight lattice fuel bundle model, Nucl. Eng. Des. 262 (2013) 589-599. https://doi.org/10.1016/j.nucengdes.2013.06.005
  16. M. Damsohn, Liquid films and droplet deposition in a BWR fuel element, PhD Thesis No. 19527, ETH Zurich., 2011. Available from: http://e-collection.library.ethz.ch/eserv/eth:2835/eth-2835-02.pdf.
  17. A. Saxena, H.-M. Prasser, Liquid Film Modeling in BWR Subchannel with Spacers, Application of CFD/CMFD Codes to Nuclear Reactor Safety and Design and their Experimental Validation (CFD4NRS-5), OECD/NEA & IAEA Workshop, Zurich, Switzerland, September 9-11, 2014, paper S02-4. Available from: https://www.oecd-nea.org/nsd/csni/cfd.
  18. K. Cramer, Investigation of the Influence of the Phase Transition on the Liquid Film Thickness in Vertical, Annular Two-phase Flow, Master thesis, ETH Zurich., April 2014. Available from: hprasser@ethz.ch.
  19. A. Saxena, R. Zboray, H.-M. Prasser, Simulations and Measurements of Adiabatic Annular Flows in a Triangular, Tight Lattice Nuclear Fuel Bundle Model, Application of CFD/CMFD Codes to Nuclear Reactor Safety and Design and their Experimental Validation (CFD4NRS-5), OECD/NEA & IAEA Workshop, Zurich, Switzerland, September 9-11, 2014, paper S02-1. Available from: https://www.oecd-nea.org/nsd/csni/cfd.
  20. R. Zboray, Ch. Bolesch, H.-M. Prasser, Neutron and X-ray imaging techniques for nuclear fuel rod bundle optimization and development, SWINTH-2016, Livorno, June 15-17, 2016, paper 17. Available from: hprasser@ethz.ch.

Cited by

  1. Time averaged tomographic measurements before and after dryout in a simplified BWR subchannel geometry vol.380, pp.None, 2016, https://doi.org/10.1016/j.nucengdes.2021.111295