DOI QR코드

DOI QR Code

Optimal Design of Two-Dimensional Cascade with Shock-Free Inflow Criterion

  • Muis, Abdul (Faculty of Mechanical and Aerospace Engineering, Institute Technology Bandung) ;
  • Sutikno, Priyono (Faculty of Mechanical and Aerospace Engineering, Institute Technology Bandung) ;
  • Soewono, Aryadi (Faculty of Mechanical and Aerospace Engineering, Institute Technology Bandung) ;
  • Hartono, Firman (Faculty of Mechanical and Aerospace Engineering, Institute Technology Bandung)
  • 투고 : 2016.03.15
  • 심사 : 2016.10.17
  • 발행 : 2016.12.31

초록

The shock-free inflow criterion applied in the development of two-dimensional cascade for turbomachinery design. The developed cascade analysis with potential flow calculation through a panel method has been used to determine the shock-free inflow condition. The combination between cascade analysis and PSO (particle swarm optimization) algorithm provides an opportunity to develop a diagram of a two-dimensional parameter cascade at various airfoil shapes. Analytical equations have been derived from the diagram that will facilitate the turbomachinery designer in applying the shock-free inflow criterion on their developed cascade. This method has been used to develop the very low head axial hydraulic turbine and provides excellent results of numerical and actual prototype performances.

키워드

참고문헌

  1. Peng, G., Cao, S., Ishizuka, M., and Hayam, S., 2002, "Design Optimization of Axial Flow Hydraulic Turbine Runner Part II," International Journal for Numerical Methods in Fluids, Vol. 39, pp. 533-548. https://doi.org/10.1002/fld.343
  2. Wu, C. H., 1952, "A General Theory of Three-Dimensional Flow in Subsonic and Supersonic Turbomachines od Axial, Radial and Mixed Flow Types," Technical Note 2604, National Advisory Committee for Aeronautics.
  3. Suzuki, M., Setoguchi, T., and Kaneko, K., 2011, "Prediction of Cascade Performance of Circular-Arc Blades with CFD," International Journal of Fluid Machinery and Systems, Vol. 2, No.1.
  4. Chen, S., and Chen, F., 2009, "Analysis of Aerodynamic Performance in an Annular Compressor Bowed Cascade with Large Camber Angle," International Journal of Fluid Machinery and Systems, Vol. 4, No.4.
  5. Lewis, R.I., 1996, Turbomachinery Performance Analysis, Elsevier Science and Technology Books. 4
  6. Resiga, R.S., Muntetan, S., Bernad, S., Frunza, T., and Balint, D., 2006, "Thin Hydrofoil Cascade Design and Numerical Flow Analysis, Part I - Design," Proceedings of Romanian Academy, Vol. 7, pp. 000-000.
  7. Thompson, W.E., 1972, "Aerodynamics of Turbines," Proceedings of The First Turbomachinery Symposium.
  8. Lewis, R.I., 2001, "Extension of Vortex Method to The Flow Simulation of Mixed-Flow Turbomachines," Proceedings of The Second International Conference on Vortex Methods, Istanbul, Turkey, 181-187.
  9. Lewis, R.I., 1991, Vortex Element Method for Fluid Dynamic Analysis of Engineering Systems, Cambridge University Press.
  10. Kennedy, J., and Eberhart, R., 1989, "Particle Swarm Optimization," IEEE, 1942-1948.
  11. Rao, S.S., 2009, Engineering Optimization, Theory and Practice, John Wiley & Sons, Inc.
  12. Muis, A., Sutikno , P., Soewono A., and Hartono F., 2015, "Design Optimization of Axial Hydraulic Turbine for Very Low Head Application," Energy Procedia, Vol. 68, pp. 263-273. https://doi.org/10.1016/j.egypro.2015.03.255
  13. Muis, A., Sutikno , P., 2014, "Design and Simulation of Very Low Head Axial Hydraulic Turbine with Variation of Swirl Velocity Criterion," International Journal of Fluid Machinery and Systems, Vol. 7, No. 2.
  14. Widiyanto, P., Sutikno , P., Muis, A., and Irasari, P., 2015, "Performance Test of the Low Head Axial Flow Turbine Prototype Integrated with Permanent magnet Generator," Proceedings of The 13th Asian International Conference on Fluid Machinery, 7th-10th September 2015, Tokyo, Japan.