한국지진공학회논문집 (Journal of the Earthquake Engineering Society of Korea)

  • 제20권5호
  • /
  • Pages.311-318
  • /
  • 2016
  • /
  • 1226-525X(pISSN)
  • /
  • 2234-1099(eISSN)
한국지진공학회 (Earthquake Engineering Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

납심의 온도상승효과를 고려한 납-고무받침(LRB)의 비탄성응답 평가

Inelastic Response Evaluation of Lead-Rubber Bearing Considering Heating Effect of Lead Core

  • Yang, Kwang-Kyu (Department of Civil Engineering, Kangwon National University) ;
  • Song, Jong-Keol (Department of Civil Engineering, Kangwon National University)
  • 투고 : 2016.05.18
  • 심사 : 2016.07.20
  • 발행 : 2016.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The lead-rubber bearing (LRB) dissipates seismic energy through plastic deformation of lead core. Under large-displacement cyclic motion, the temperature increases in the lead core. The shear strength of a lead-rubber bearing is reduced due to the heating effect of the lead core. In this study, the seismic responses such as displacement increasing, shear strength and vertical stiffness degradations of LRB due to the heating effect are evaluated for design basis earthquake (DBE) and beyond design basis earthquake (150% DBE, 167% DBE, 200% DBE).

키워드

참고문헌

  1. Kumar M, Whittaker A, Constantinou M. An advanced numerical model of elastomeric seismic isolation bearings. Earthquake Engineering and Structural Dynamics. 2014;43:1955-1974. https://doi.org/10.1002/eqe.2431
  2. Kumar M, Whittaker A, Constantinou M. Response of base-isolated nuclear structures to extreme earthquake shaking. Nuclear Engineering and Design. 2015;295:860-874. https://doi.org/10.1016/j.nucengdes.2015.06.005
  3. U.S. Nuclear Regulatory Commission. Technical Considerations for Seismic Isolation of Nuclear Facilities(Draft). c2012.
  4. Mazzoni S, McKenna F, Scott MH, Fenves GL. OpenSEES: Open System of Earthquake Engineering Simulation[Internet]. Pacific Earthquake Engineering Center, Univ. of Calif., Berkeley. Available from: http://opensees.berkeley.edu.
  5. Kalpakidis IV, Constantinou MC, Whittacker AS. Modeling strength degradation in lead-rubber bearing under earthquake shaking. Earthquake Engineering and Structural Dynamics. 2010;39:1533-1549. https://doi.org/10.1002/eqe.1039
  6. Kalpakidis IV, Constantinou MC. Effects of heating and load history on the behavior of lead-rubber bearings. Technical Report MCEER-08-0027. Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY. c2008.
  7. Abrahamson, NA. 1992. Non-stationary spectral matching, Seismol. Res. Lett. 63, 30. c1992.
  8. Atik LA, Abrahamson N. An Improved Method for Nonstationary Spectral Matching, Earthquake Spectra. 2010;26(3):601-617. https://doi.org/10.1193/1.3459159
  9. U.S. Nuclear Regulatory Commission. A performance-based approach to define the site-specific earthquake ground motion. Regulatory Guide(RG) 1.208. c2007.
  10. U.S. Nuclear Regulatory Commission. Design response spectra for seismic design of nuclear power plants. Regulatory Guide(RG) 1.60. c1973.
  11. U.S. Nuclear Regulatory Commission. Technical Considerations for Seismic Isolation of Nuclear Facilities(Draft). c2012.
  12. ASCE, forthcoming. ASCE/SEI 4-16. Seismic analysis of safety-related nuclear structures. Structural Engineering Institute of the American Society of Civil Engineers, Reston, VA.
  13. Kalpakidis IV, ConConstantinou MC, Whittaker AS, Kalpakidis Y, Fenz DM, Warn GP. Performance of seismic isolation hardware under service and seismic loading. MCEER-07-0012. Multidisciplinary Center for Earthquake Engineering Research, State Univ. of New York, Buffalo, NY. c2007.

피인용 문헌

  1. Seismic Response Evaluation of Seismically Isolated Nuclear Power Plant Structure Subjected to Gyeong-Ju Earthquake vol.20, pp.7 Special, 2016, https://doi.org/10.5000/EESK.2016.20.7.453