DOI QR코드

DOI QR Code

Advanced analysis for planar steel frames with semi-rigid connections using plastic-zone method

  • Nguyen, Phu-Cuong (Department of Civil and Environmental Engineering, Sejong University) ;
  • Kim, Seung-Eock (Department of Civil and Environmental Engineering, Sejong University)
  • 투고 : 2016.01.04
  • 심사 : 2016.07.26
  • 발행 : 2016.08.10

초록

This paper presents a displacement-based finite element procedure for second-order distributed plasticity analysis of planar steel frames with semi-rigid beam-to-column connections under static loadings. A partially strain-hardening elastic-plastic beam-column element, which directly takes into account geometric nonlinearity, gradual yielding of material, and flexibility of semi-rigid connections, is proposed. The second-order effects and distributed plasticity are considered by dividing the member into several sub-elements and meshing the cross-section into several fibers. A new nonlinear solution procedure based on the combination of the Newton-Raphson equilibrium iterative algorithm and the constant work method for adjusting the incremental load factor is proposed for solving nonlinear equilibrium equations. The nonlinear inelastic behavior predicted by the proposed program compares well with previous studies. Coupling effects of three primary sources of nonlinearity, geometric imperfections, and residual stress are investigated and discussed in this paper.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation (NRF) of Korea

참고문헌

  1. Alemdar, B.N. and White, D.W. (2005), "Displacement, flexibility, and mixed beam-column finite element formulations for distributed plasticity analysis", J. Struct. Eng., 131(12), 1811-1819. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:12(1811)
  2. Attalla, M.R., Deierlein, G.G. and McGuire, W. (1994), "Spread of plasticity: Quasi-plastic-hinge approach", J. Struct. Eng., 120(8), 2451-2473. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2451)
  3. Avery, P. and Mahendran, M. (2000), "Distributed plasticity analysis of steel frame structures comprising non-compact sections", Eng. Struct., 22(8), 901-919. https://doi.org/10.1016/S0141-0296(99)00038-3
  4. Bandyopadhyay, M., Banik, A.K. and Datta, T.K. (2015), Numerical Modeling of Compound Element for Static Inelastic Analysis of Steel Frames with Semi-rigid Connections, Springer, India.
  5. Chan, S.L. and Chui, P.P.T. (2000), Nonlinear Static and Cyclic Analysis of Steel Frames with Semi-rigid Connections, Elsevier, Amsterdam, The Netherlands.
  6. Chen, W.F. and Kim, S.E. (1997), LRFD Steel Design using Advanced Analysis, CRC Press, Boca Raton, New York, NY, USA.
  7. Chen, W.F. and Kishi, N. (1989), "Semirigid steel beam-to-column connections-Data-base and modeling", J. Struct. Eng.-Asce, 115(1), 105-119. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:1(105)
  8. Chen, W.F. and Lui, E.M. (1987), "Effects of joint flexibility on the behavior of steel frames", Comput. Struct., 26(5), 719-732. https://doi.org/10.1016/0045-7949(87)90021-6
  9. Chiorean, C.G. (2009), "A computer method for nonlinear inelastic analysis of 3D semi-rigid steel frameworks", Eng. Struct., 31(12), 3016-3033. https://doi.org/10.1016/j.engstruct.2009.08.003
  10. Diaz, C., Marti, P., Victoria, M. and Querin, O.M. (2011), "Review on the modelling of joint behaviour in steel frames", J. Construct. Steel Res., 67(5), 741-758. https://doi.org/10.1016/j.jcsr.2010.12.014
  11. ECCS (1984), Ultimate Limit State Calculation of Sway Frames with Rigid Joints, European Convention for Constructional Steelwork, Technical Committee 8-Structural Stability Technical Working Group 8.2.
  12. Foley, C.M. (2001), "Advanced analysis of steel frames using parallel processing and vectorization", Comput.-Aid. Civil Infrastruct. Eng., 16(5), 305-325. https://doi.org/10.1111/0885-9507.00235
  13. Foley, C.M. and Vinnakota, S. (1997), "Inelastic analysis of partially restrained unbraced steel frames", Eng. Struct., 19(11), 891-902. https://doi.org/10.1016/S0141-0296(97)00175-2
  14. Foley, C.M. and Vinnakota, S. (1999), "Inelastic behavior of multistory partially restrained steel frames. Part I", J. Struct. Eng.-Asce, 125(8), 854-861. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:8(854)
  15. Gorgun, H. (2013), "Geometrically nonlinear analysis of plane frames composed of flexibly connected members", Struct. Eng. Mech., Int. J., 45(3), 277-309. https://doi.org/10.12989/sem.2013.45.3.277
  16. Goto, Y. and Chen, W.F. (1987), "On the computer-based design analysis for the flexibly jointed frames", J. Construct. Steel Res., 8, 203-231. https://doi.org/10.1016/0143-974X(87)90059-9
  17. Hoang, V.-L., Nguyen Dang, H., Jaspart, J.-P. and Demonceau, J.-F. (2015), "An overview of the plastichinge analysis of 3D steel frames", Asia Pacific J. Computat. Eng., 2(1), 1-34. https://doi.org/10.1186/s40540-015-0013-z
  18. Kim, S.E. and Lee, D.H. (2002), "Second-order distributed plasticity analysis of space steel frames", Eng. Struct., 24(6), 735-744. https://doi.org/10.1016/S0141-0296(01)00136-5
  19. King, W.S., White, D.W. and Chen, W.F. (1992), "Second-order inelastic analysis methods for steel-frame design", J. Struct. Eng., 118(2), 408-428. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:2(408)
  20. Lui, E.M. and Chen, W.F. (1986), "Analysis and behavior of flexibly-jointed frames", Eng. Struct., 8(2), 107-118. https://doi.org/10.1016/0141-0296(86)90026-X
  21. Mahendran, M. and Avery, P. (2000), "Analytical benchmark solutions for steel frame structures subject to local buckling effects", Adv. Struct. Eng., 3(3), 215-229. https://doi.org/10.1260/1369433001502157
  22. Nguyen, P.-C. and Kim, S.-E. (2014), "An advanced analysis method for three-dimensional steel frames with semi-rigid connections", Finite Elem. Anal. Des., 80, 23-32. https://doi.org/10.1016/j.finel.2013.11.004
  23. Nguyen, P.-C. and Kim, S.-E. (2015), "Second-order spread-of-plasticity approach for nonlinear timehistory analysis of space semi-rigid steel frames", Finite Elem. Anal. Des., 105, 1-15. https://doi.org/10.1016/j.finel.2015.06.006
  24. Nguyen, P.-C., Doan, N.T.N., Ngo-Huu, C. and Kim, S.-E. (2014), "Nonlinear inelastic response history analysis of steel frame structures using plastic-zone method", Thin-Wall. Struct., 85, 220-233. https://doi.org/10.1016/j.tws.2014.09.002
  25. Ostrander, J.R. (1970), An Experimental Investigation of End-plate Connections, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.
  26. Richard, R.M., Kriegh, J.D. and Hormby, D.E. (1982), "Design of single plate framing connections with A307 bolts", Eng. J.-Amer. Inst. Steel Constr., 19(4), 209-213.
  27. Rigobello, R., Coda, H.B. and Neto, J.M. (2013), "Inelastic analysis of steel frames with a solid-like finite element", J. Construct. Steel Res., 86, 140-152. https://doi.org/10.1016/j.jcsr.2013.03.023
  28. Saritas, A. and Koseoglu, A. (2015), "Distributed inelasticity planar frame element with localized semi-rigid connections for nonlinear analysis of steel structures", Int. J. Mech. Sci., 96-97, 216-231. https://doi.org/10.1016/j.ijmecsci.2015.04.005
  29. Teh, L.H. and Clarke, M.J. (1999), "Plastic-zone analysis of 3D steel frames using beam elements", J. Struct. Eng.-Asce, 125(11), 1328-1337. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:11(1328)
  30. Toma, S. and Chen, W.-F. (1992), "European calibration frames for second-order inelastic analysis", Eng. Struct., 14(1), 7-14. https://doi.org/10.1016/0141-0296(92)90003-9
  31. Valipour, H.R. and Bradford, M.A. (2013), "Nonlinear P-D analysis of steel frames with semi-rigid connections", Steel Compos. Struct., Int. J., 14(1), 1-20. https://doi.org/10.12989/scs.2013.14.1.001
  32. Vogel, U. (1985), "Calibrating frames", Stahlbau, Berlin, Germany, 54(10), 295-301.
  33. White, D.W. (1993), "Plastic-hinge methods for advanced analysis of steel frames", J. Construct. Steel Res., 24(2), 121-152. https://doi.org/10.1016/0143-974X(93)90059-2
  34. White, D.W. and Chen, W.F. (1993), Plastic Hinge based Methods for Advanced Analysis and Design of Steel Frames-An Assessment of the State of the Art, Structural Stability Research Council, Lehigh University, Bethlehem, PA, USA.
  35. Wilson, E.L. (1974), "The static condensation algorithm", Int. J. Numer. Methods Eng., 8(1), 198-203. https://doi.org/10.1002/nme.1620080115
  36. Wong, H.P. (1995), "A study on the behavior of realistic steel buildings using design and rigorous approaches", Master Thesis; Hong Kong Polytechnic University, Hong Kong.

피인용 문헌

  1. Optimal Formation Assessment of Multi-layered Ground Retrofit with Arch-Grid Units Considering Buckling Load Factor pp.2093-6311, 2018, https://doi.org/10.1007/s13296-018-0115-x
  2. Static behavior of steel tubular structures considering local joint flexibility vol.24, pp.4, 2016, https://doi.org/10.12989/scs.2017.24.4.425
  3. Elasto-Plastic Analysis of Cylindrical Vessel with Arbitrary Material Gradation Subjected to Thermo-Mechanical Loading Via DTM vol.44, pp.10, 2016, https://doi.org/10.1007/s13369-019-03910-x
  4. Study on stability and design guidelines for the combined system of scaffolds and shores vol.35, pp.3, 2016, https://doi.org/10.12989/scs.2020.35.3.385
  5. Seismic behavior of steel cabinets considering nonlinear connections and site-response effects vol.36, pp.1, 2016, https://doi.org/10.12989/scs.2020.36.1.017