수가공 및 기계가공 된 나비장 접합부의 성능 비교

Performance Comparison of Butterfly Joints between Manual Member and Pre-cut Member

  • 김광철 (전북대학교 주거환경학과) ;
  • 김준호 (전북대학교 주거환경학과)
  • Kim, Gwang-Chul (Department of Housing Environmental Design, Chonbuk National University) ;
  • Kim, Jun-Ho (Department of Housing Environmental Design, Chonbuk National University)
  • 투고 : 2016.05.24
  • 심사 : 2016.07.05
  • 발행 : 2016.07.25

초록

To modularize the joints of Hanok, the bending strengths of butterfly joints between pre-cut and manual member were compared. Structural size joints were manufactured and the length, width and thickness of each tenon were produced with different sizes. The ultimate load of pre-cut members was 2 times higher than that of manual members. Degree of anchorage for the joints on pre-cut member was also superior to that of manual member. By the F-test results, a great influence between ultimate load and sizes of tenon was found. In result of multiple regression analysis, the length and thickness of tenon were showed proportion relationships with the ultimate load, but the width of tenon was showed inverse proportion with the ultimate load. The results of this study can be used to identify the relationships among the major influence factors. Futhermore, it might be used as basic data for modularization the joints of Hanok.

키워드

참고문헌

  1. 김광철. 2005. 다양한 혀애의 목재 결합부의 강도 성능 개선에 관한 연구. 목재공학 33(6): 38-45.
  2. 김광철, 박희준. 2011. 유한요소법을 적용한 전통 접합부의 휨 특성에 대한 연구. 한국목재공학 학술발표대회. 254-255쪽.
  3. 방성준, 이전제. 2010. 전통목조건축 주먹장 접합부의 모멘트 성능. 대한건축학회 춘계우수졸업논문전 수상논문개요집 제6회.
  4. 이선영, 화종국, 홍성걸. 2010. 전통목조 주먹장 접합부에서 주먹장 각도가 파괴모에 미치는 영향과 역학적모델링. 대한건축학회 26(12): 35-44.
  5. 이영욱, 홍성걸, 황종국, 배병선. 2007. 전통 목구조 시스템에서 장부이음을 가진 도리 방향 골조의 수평하중 저항 능력. 대한건축학회 23(2): 35-42.
  6. 황권환, 박문재, 박주생. 2009. 낙엽송집성재 기계프리컷 주먹장의 인장내력. 대한건축학회 학술발표대회. 483-486쪽.
  7. 황종국, 홍성걸. 2008. 전통 목구조 기둥-창방 접합부 인장내력과 파괴모드에 관한 연구. 대한건축학회 24(11): 41-52.
  8. Gwang-Chul Kim, Chun-Won Kang, and Junji Matsumura. 2009. Performance Assessment Existing Korean School Building (I) - Mechanical and Physical Properties of the Rafter Members -.Journal of the Agriculture, Forestry and Fisheries Research Information Technology Center, KyushuUniv 54(2): 439-444.
  9. Gwang-Chul Kim, Chun-Won Kang, and Junji Matsumura. 2009. Performance Assessment Existing Korean School Building (II) - Study on the Species Identification and Residual Strength Properties of the Rafter Members-. Journal of the Agriculture, Forestry and Fisheries Research Information Technology Center, Kyushu Univ 54(2): 445-448.
  10. Gwang-Chul Kim, Chun-Won Kang, and Junji Matsumura. 2009. Studies on the Evaluation of Dowel-Bearing Strength for the Manufacture of Skin Timber. Journal of the Agriculture, Forestry and Fisheries Research Information Technology Center, Kyushu Univ 54(2): 449-455.
  11. Gwang-Chul Kim, Chun-Won Kang, and Junji Matsumura. 2010. Estimating The Structural Capacity of Skin-timber. Journal of the Agriculture, Forestry and Fisheries Research Information Technology Center, Kyushu Univ 55(2): 287-295.
  12. Gwang-Chul Kim and Junji Matsumura. 2011. A study on the Bending Properties of Traditional Korean Joints. Journal of the Agriculture, Forestry and Fisheries Research Information Technology Center, Kyushu Univ 56(2): 353-360.
  13. Sora Han. 2006. Evaluation of the mechanical performance of column and girder joint by various types in traditional wooden building. Mater course thesis, Seoul National University, Seoul, Korea.