DOI QR코드

DOI QR Code

Slender piezoelectric beams with resistive-inductive electrodes - modeling and axial wave propagation

  • 투고 : 2015.10.19
  • 심사 : 2016.03.23
  • 발행 : 2016.08.25

초록

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.

키워드

과제정보

연구 과제 주관 기관 : Austrian Science Fund FWF, K2-Comet Linz Center of Mechatronics LCM

참고문헌

  1. Abramovich, M. and Stegun, I. (1972), Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables, Dover, New York.
  2. Buchberger, G., Barb, R.A., Schoeftner, J., Bauer, S., Hilber, W., Mayrhofer, B. and Jakoby, B. (2015), "Transparent, flexible and thin sensor surfaces for passive light-point localization based on two functional polymers", Sensor. Actuat. A - Phys., 239, 70-78.
  3. Buchberger, G. and Schoeftner, J. (2013), "Modeling of slender laminated piezoelastic beams with resistive electrodes - comparison of analytical results with three-dimensional finite element calculations", Smart Mater. Struct., 22, 032001 (13pp). https://doi.org/10.1088/0964-1726/22/3/032001
  4. Buchberger, G., Schwoediauer, R., Arnold, N. and Bauer, S. (2008b), "Cellular ferroelectrets for flexible touchpads, keyboards and tactile sensors", IEEE Sensors Conference Proceedings 2008, 10, 1520-1523.
  5. Buchberger, G., Schwoediauer, R. and Bauer, S. (2008), "Flexible large area ferroelectret sensors for location sensitive touchpads", Appl. Phys. Lett., 92, 123511 (3 pages). https://doi.org/10.1063/1.2903711
  6. Crawley, E.F. (1994), "Intelligent structures for aerospace: a technology overview and assessment", AIAA J., 32(8), 1689-1699. https://doi.org/10.2514/3.12161
  7. Ding, L., Zhu, H.P. and Yin, T. (2013), "Wave propagation in a periodic elastic-piezoelectric axial-bending coupled beam", J. Sound Vib., 332(24), 6377-6388. https://doi.org/10.1016/j.jsv.2013.06.021
  8. Forward, R.L. (1979), "Electronic damping of vibrations in optical structures", Appl. Opt., 18(5), 670-677.
  9. Graff, K.F. (1991), Wave motion in elastic solids, Dover, New York.
  10. Jansson, A. and Lundberg, B. (2007), "Piezoelectric generation of extensional waves in a viscoelastic bar by use of a linear power amplifier: Theoretical basis", J. Sound Vib., 306(1-2), 318-332. https://doi.org/10.1016/j.jsv.2007.05.005
  11. Jansson, A. and Lundberg, B. (2008), "Three-port impedance model of a piezoelectric bar element: Application to generation and damping of extensional waves", J. Sound Vib., 315(4-5), 985-1012. https://doi.org/10.1016/j.jsv.2008.02.013
  12. Kolsky, H. (1963), Stress waves in solids, Dover, New York.
  13. Krawczuk, M., Grabowska, J. and Palacz, M. (2006), "Longitudinal wave propagation. Part I-Comparison of rod theories", J. Sound Vib., 295(3-5), 461-478. https://doi.org/10.1016/j.jsv.2005.12.048
  14. Krommer, M. (2001), "On the correction of the Bernoulli-Euler beam theory for smart piezoelectric beams", Smart Mater. Struct., 10(4), 668-680. https://doi.org/10.1088/0964-1726/10/4/310
  15. Lediaev, L. (2010), "Finite element modeling of piezoelectric bimorphs with conductive polymer electrodes", doctoral thesis Montana State University, Bozeman, Montana.
  16. Lin, X. and Yuan, F.G. (2001), "Diagnostic Lamb waves in an integrated piezoelectric sensor/actuator plate: analytical and experimental studies", Smart Mater. Struct., 10(5), 907-913. https://doi.org/10.1088/0964-1726/10/5/307
  17. Miu, D.K. (1993), Mechatronics: Electromechanics and Contromechanics, New York, Springer.
  18. Rose, J.L. (2004), Ultrasonic waves in solid media, Cambridge, Cambridge University.
  19. Schoeftner, J. and Buchberger, G. (2013), "Verfahren zur Aenderung des statischen und/oder dynamischen Istverhaltens eines insbesondere elastischen Koerpers unter aeusserer Belastung", Patent 513259, filed January 29th, 2013 and issued March 15th, 2014.
  20. Schoeftner, J., Buchberger, G. and Benjeddou, A. (2015b), "Transverse dynamics of slender piezoelectric bimorphs with resistive-inductive electrodes" (submitted simultaneously for publication in Smart Struct. Syst. 2016)
  21. Schoeftner, J., Buchberger, G., Brandl, A. and Irschik, H. (2015), "Theoretical prediction and experimental verification of shape control of beams with piezoelectric patches and resistive circuits", Compos. Struct., 133, 746-755. https://doi.org/10.1016/j.compstruct.2015.07.026
  22. Schoeftner, J., Buchberger, G. and Irschik, H. (2014), "Static and dynamic shape control of slender beams by piezoelectric actuation and resistive electrodes", Compos. Struct., 111, 66-74. https://doi.org/10.1016/j.compstruct.2013.12.015
  23. Tzou, H.S. (1998), "Multifield transducers, devices, mechatronic systems and structronic systems with smart materials", Shock Vib. Dig., 30(4), 282-294. https://doi.org/10.1177/058310249803000402
  24. Vivar-Perez, J.M., Duczek, S. and Gabbert, U. (2014), "Analytical and higher order finite element hybrid approach for an efficient simulation of ultrasonic guided waves I: 2D-analysis", Smart Struct. Syst., 13(4), 587-614. https://doi.org/10.12989/sss.2014.13.4.587
  25. Yuan, W.C., Zhou, L. and Yuan, F.G. (2008), "Wave reflection and transmission in composite beams containing semi-infinite delamination", J. Sound Vib., 313(3-5), 676-695. https://doi.org/10.1016/j.jsv.2007.12.012

피인용 문헌

  1. Bending moment tracking and the reduction of the axial stress in vibrating beams by piezoelectric actuation vol.228, pp.11, 2017, https://doi.org/10.1007/s00707-017-1918-0
  2. Influence of electro-magneto-thermal environment on the wave propagation analysis of sandwich nano-beam based on nonlocal strain gradient theory and shear deformation theories vol.20, pp.3, 2017, https://doi.org/10.12989/sss.2017.20.3.329