Particle and aerosol research (한국입자에어로졸학회지)

Korean Association for Particle and Aerosol Research (한국입자에어로졸학회)
권호 표지
DOI QR코드

DOI QR Code

Performance characteristics of simultaneous removal equipment for paint particulate matter and VOCs generated from a spraying paint booth

입자상물질과 VOCs 동시제거 실증장치에서 자동차 페인트 부스 발생 paint aerosol과 VOCs의 동시제거 성능 특성

  • Lee, Jae-Rang (Climate Change Research Division, Korea Institute of Energy Research) ;
  • Hasolli, Naim (Climate Change Research Division, Korea Institute of Energy Research) ;
  • Jeon, Seong-Min (Climate Change Research Division, Korea Institute of Energy Research) ;
  • Lee, Kang-San (Climate Change Research Division, Korea Institute of Energy Research) ;
  • Kim, Kwang-Deuk (Climate Change Research Division, Korea Institute of Energy Research) ;
  • Park, Young-Ok (Climate Change Research Division, Korea Institute of Energy Research)
  • Received : 2016.12.12
  • Accepted : 2016.12.26
  • Published : 2016.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to determine the performance characteristics of the paint particulate and volatile organic compounds(VOCs) simultaneous removal from the spraying paint booth in the laboratory and real site by sticky paint particulate and VOCs simultaneous removal demonstration unit. The sticky paint particulate and VOCs simultaneous removal unit is composed of the horizontal type pleated filter modules and the zig-zag type granular activated carbon packing modules. The test conditions at the laboratory are $50.15g/m^3$ of average paint aerosol concentration and 300 ppm of VOCs concentration which were same as the working conditions of spraying paint booth in the real site. But, the demonstration conditions at the real site are varied according to the working condition of spraying paint booth for the kind of passenger car bodies. The test results at the laboratory obtained that 99% of total particulate collection efficiency at 0.62 m/min of filtration velocity and 84% at 1.77 m/min of filtration velocity. The VOCs removal efficiencies are 97% at $3500hr^{-1}$ of gas hour space velocity and 59% at $10,000hr^{-1}$ of gas hour space velocity. In the real site test, the average removal efficiency of PM10 was measured to be 99.65%, the average removal efficiency of PM2.5 was 99.38%, the average removal efficiency of PM1 was 98.52%, and the average removal efficiency of VOCs was 89%.

Keywords

References

  1. Ahmad, A. A., & Hameed, B. H. (2010). Fixed-bed adsorption of reactive azo dye onto granular activated carbon prepared from waste. Journal of hazardous materials, 175(1), 298-303. https://doi.org/10.1016/j.jhazmat.2009.10.003
  2. Duello, L., Reaman, D., & McPhail, H. (2002) Paint booth supply air filtration. Metal Finishing, 100(5), 26-30.
  3. Gallego, E., Roca, F. J., Perales, J. F., & Guardino, X. (2013) Experimental evaluation of VOC removal efficiency of a coconut shell activated carbon filter for indoor air quality enhancement. Building and Environment, 67, 14-25. https://doi.org/10.1016/j.buildenv.2013.05.003
  4. Guillemot, M., Mijoin, J., Mignard, S., & Magnoux, P. (2007) Volatile organic compounds (VOCs) removal over dual functional adsorbent/catalyst system. Applied Catalysis B: Environmental, 75(3), 249-255. https://doi.org/10.1016/j.apcatb.2007.04.020
  5. Hasolli, N., Park, Y. O., & Rhee, Y. W. (2013) Experimental study on filtration performance of flat sheet multiple-layer depth filter media for intake air filtration. Aerosol Science and Technology, 47(12), 1334-1341. https://doi.org/10.1080/02786826.2013.842281
  6. Hinds, W. C. (1982) Aerosol technology: properties, behavior, and measurement of airborne particles. New York, Wiley-Interscience, 1982. 182-203.
  7. Huang, S. L., Yin, C. Y., & Yap, S. Y. (2010) Particle size and metals concentrations of dust from a paint manufacturing plant. Journal of hazardous materials, 174(1), 839-842. https://doi.org/10.1016/j.jhazmat.2009.09.129
  8. Khan, F. I., & Ghoshal, A. K. (2000) Removal of volatile organic compounds from polluted air. Journal of loss prevention in the process industries, 13(6), 527-545. https://doi.org/10.1016/S0950-4230(00)00007-3
  9. Kim, H. N., Bong, C. K., Kim, Y. G., & Jeon, J. M. (2013) The Study on the Emission Characteristics of HAPs and PM from the Motor Vehicle Paint Facility. Journal of Korean Society for Atmospheric Environment, 29(6), 713-721. https://doi.org/10.5572/KOSAE.2013.29.6.713
  10. Lee, J. R., Hasolli, N., Jeon, S. M., Lee, K. S., Sohn, J. R., & Park, Y. O. (2015) Removal Performance of Sticky Paint Aerosol Control System Generated from Small Scale Car Paint Overspray Booth. Journal of Korean Society for Atmospheric Environment, 31(1), 54-62. https://doi.org/10.5572/KOSAE.2015.31.1.054
  11. Lee, Kang-San, Jong-Ryeul Sohn, and Young-Ok Park (2015) Filtration performance characteristics of ceramic candle filter based on inlet structure of high-temperature and high-pressure dust collectors, Journal of Industrial and Engineering Chemistry, 21, 101-110. https://doi.org/10.1016/j.jiec.2014.09.004
  12. Leung, W. W. F., Hung, C. H., & Yuen, P. T. (2009) Experimental investigation on continuous filtration of sub-micron aerosol by filter composed of dual-layers including a nanofiber layer. Aerosol Science and Technology, 43(12), 1174-1183. https://doi.org/10.1080/02786820903261086
  13. Li, F., Niu, J., & Zhang, L. (2006) A physically-based model for prediction of VOCs emissions from paint applied to an absorptive substrate. Building and environment, 41(10), 1317-1325. https://doi.org/10.1016/j.buildenv.2005.05.026
  14. Yoo, E. C., Cho, G. J., & Kim, Y. T. (2004) Study on the characteristics of THC emission in paint and dry booths, Rep. Busan Inst. Health & Environ, 14, 60-77.