Steel and Composite Structures

  • 제21권4호
  • /
  • Pages.883-919
  • /
  • 2016
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical solution for buckling of embedded laminated plates based on higher order shear deformation plate theory

  • Baseri, Vahid (Department of Mechanical Engineering, Kashan Branch, Islamic Azad University) ;
  • Jafari, Gholamreza Soleimani (Department of Mechanical Engineering, Kashan Branch, Islamic Azad University) ;
  • Kolahchi, Reza (Department of Mechanical Engineering, Kashan Branch, Islamic Azad University)
  • 투고 : 2016.02.23
  • 심사 : 2016.06.21
  • 발행 : 2016.07.20
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, buckling analysis of an embedded laminated composite plate is investigated. The elastic medium is simulated with spring constant of Winkler medium and shear layer. With considering higher order shear deformation theory (Reddy), the total potential energy of structure is calculated. Using Principle of Virtual Work, the constitutive equations are obtained. The analytical solution is performed in order to obtain the buckling loads. A detailed parametric study is conducted to elucidate the influences of the layer numbers, orientation angle of layers, geometrical parameters, elastic medium and type of load on the buckling load of the system. Results depict that the highest buckling load is related to the structure with angle-ply orientation type and with increasing the angle up to 45 degrees, the buckling load increases.

키워드

참고문헌

  1. Alibeigloo, A. and Madoliat, R. (2009), "Static analysis of cross-ply laminated plates with integrated surface piezoelectric layers using differential quadrature", Compos. Struct., 88(3), 342-351. https://doi.org/10.1016/j.compstruct.2008.04.018
  2. Chakrabarti, A. and Sheikh, A.H. (2006), "Dynamic instability of laminated sandwich plates using an efficient finite element model", Thin-Wall. Struct., 44(1), 57-68. https://doi.org/10.1016/j.tws.2005.09.003
  3. Chen, W., Xu, M. and Li, L. (2012), "A model of composite laminated Reddy plate based on new modified couple stress theory", Compos. Struct., 94(7), 2143-2155. https://doi.org/10.1016/j.compstruct.2012.02.009
  4. Chow, S.T., Liew, K.M. and Lam, K.Y. (1992), "Transverse vibration of symmetrically laminated rectangular composite plates", Compos. Struct., 20(4), 213-232. https://doi.org/10.1016/0263-8223(92)90027-A
  5. Dawe, D.J. and Yuan, W.X. (2001), "Overal and local buckling of sandwich plates with laminated faceplates, Part I: Analysis", Comput. Methods Appl. Mech. Eng., 190(40-41), 5197-5213. https://doi.org/10.1016/S0045-7825(01)00169-4
  6. Ferreira, A.J.M. (2005), "Analysis of composite plates using a layerwise theory and multiquadrics discretization", Mech. Adv. Mater. Struct., 12(2), 99-112. https://doi.org/10.1080/15376490490493952
  7. Ferreira, A.J.M. and Barbosa, J.T. (1970), "Buckling behaviour of composites and sandwich plates", J. Compos. Mater., 4, 20-34. https://doi.org/10.1177/002199837000400102
  8. Ferreira, A.J.M., Roque, C.M.C. and Martins, P.A.L.S. (2003), "Analysis of composite plates using higherorder shear deformation theory and a finite point formulation based on the multiquadric radial basis function method", Compos. B: Eng., 34(7), 627-636. https://doi.org/10.1016/S1359-8368(03)00083-0
  9. Ferreira, A.J.M., Fasshauer, G.E., Batra, R.C. and Rodrigues, J.D. (2008), "Static deformations and vibration analysis of composite and sandwich plates using a layerwise theory and RBF-PS discretizations with optimal shape parameter", Compos. Struct., 86(4), 328-343. https://doi.org/10.1016/j.compstruct.2008.07.025
  10. Ghorbanpour Arani, A., Kolahchi, R. and Vossough, H. (2012), "Buckling analysis and smart control of SLGS using elastically coupled PVDF nanoplate based on the nonlocal Mindlin plate theory", Physica B, 407(22), 4458-4461. https://doi.org/10.1016/j.physb.2012.07.046
  11. Khdeir, A.A. and Librescu, L. (1988), "Analysis of symmetric cross-ply laminatedelastic plates using a higher-order theory. Part II-Buckling and freevibration", Compos. Struct., 9(4), 259-277. https://doi.org/10.1016/0263-8223(88)90048-7
  12. Luong-Van, H., Nguyen-Thoi, T., Liu, G.R. and Phung-Van, P. (2014), "A cell-based smoothed finite element method using three-node shear-locking free Mindlin plate element (CS-FEM-MIN3) for dynamic response of laminated composite plates on viscoelastic foundation", Eng. Anal. Bound. Elem., 42, 8-19. https://doi.org/10.1016/j.enganabound.2013.11.008
  13. Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012a), "A new trigonometric layerwise shear deformation theory for the finite element analysis of laminated composite and sandwich plates", Comput. Struct., 94-95, 45-53. https://doi.org/10.1016/j.compstruc.2011.12.003
  14. Mantari, J.L., Oktem, A.S. and Guedes Soares, C. (2012b), "A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates", Int. J. Solids Struct., 49(1), 43-53. https://doi.org/10.1016/j.ijsolstr.2011.09.008
  15. Matsunaga, H. (2000), "Vibration and stability of cross-ply laminatedcomposite plates according to a global higher-order plate theory", Compos. Struct., 48(4), 231-244. https://doi.org/10.1016/S0263-8223(99)00110-5
  16. Nguyen, T.N., Hui, D., Lee, J. and Nguyen-Xuan, H. (2015), "An efficient computational approach for sizedependent analysis of functionally graded nanoplates", Comput. Meth. Appl. Mech. Eng., 297, 191-218. https://doi.org/10.1016/j.cma.2015.07.021
  17. Nguyen, T.N., Thai, Ch.H. and Nguyen-Xuan, H. (2016), "On the general framework of high order shear deformation theories for laminated composite plate structures: A novel unified approach", Int. J. Mech. Sci., 110, 242-255. https://doi.org/10.1016/j.ijmecsci.2016.01.012
  18. Nguyen-Thoi, T., Luong-Van, H., Phung-Van, P., Rabczuk, T. and Tran-Trung, D. (2013), "Dynamic responses of composite plates on the Pasternak foundation subjected to a moving mass by a cell-based smoothed discrete shear gap (CS-FEM-DSG3) method", Int. J. Compos. Mater., 3, 19-27.
  19. Nguyen-Xuan, H., Thai, Ch.H. and Nguyen-Thoi, T. (2013), "Isogeometric finite element analysis of composite sandwich plates using a higher order shear deformation theory", Compos. Part B, 55, 558-574. https://doi.org/10.1016/j.compositesb.2013.06.044
  20. Nguyen-Xuan, H., Tran, L.V., Thai, Ch.H., Kulasegaram, S. and Bordas, S.P.A. (2014), "Isogeometric finite element analysis of functionally graded plates using a refined plate theory", Compos. Part B, 64, 222-234. https://doi.org/10.1016/j.compositesb.2014.04.001
  21. Pandit, M.K. Singh, B.N. and Sheikh, A.H. (2008a), "Buckling of laminated sandwich plates with soft core based onan improved higher order zigzag theory", Thin-Wall. Struct., 46(11), 1183-1191. https://doi.org/10.1016/j.tws.2008.03.002
  22. Pandit, M.K., Sheikh, A.H. and Singh, B.N. (2008b), "Vibration characteristic of laminated sandwichplates with soft core based on an improved higher-order zigzag theory", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222(8), 1443-1152.
  23. Pandit, M.K., Sheikh, A.H. and Singh, B.N. (2009), "Analysis of laminated sandwich plates based on an improved higher order zigzag theory", J. Sandwich Struct. Mat., 24, 235-241.
  24. Pandya, B.N. and Kant, T. (1988), "Higher-order shear deformable theories for flexure of sandwich plates - finite element evaluations", Int. J. Solids Struct., 24(12), 419-451.
  25. Phung-Van, P., Nguyen-Thoi, T., Luong-Van, H., Thai-Hoang, C. and Nguyen-Xuan, H. (2014a), "A cellbased smoothed discrete shear gap method (CS-FEM-DSG3) using layerwise deformation theory for dynamic response of composite plates resting on viscoelastic foundation", Comput. Methods Appl. Mech. Eng., 272, 138-159. https://doi.org/10.1016/j.cma.2014.01.009
  26. Phung-Van, P., Luong-Van, H., Nguyen-Thoi, T. and Nguyen-Xuan, H. (2014b), "A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) based on the C0-type higher-order shear deformation theory for dynamic responses of Mindlin plates on viscoelastic foundations subjected to a moving sprung vehicle", Int. J. Num. Meth. Eng., 98(13), 988-1014. https://doi.org/10.1002/nme.4662
  27. Phung-Van, P., Nguyen-Thoi, T. and Nguyen-Xuan H. (2014c), "Geometrically nonlinear analysis of functionally graded plates using a cell-based smoothed three-node plate element (CS-MIN3) based on the C0-HSDT", Comput. Methods Appl. Mech. Eng., 270, 15-36. https://doi.org/10.1016/j.cma.2013.11.019
  28. Phung-Van, P., Thai, Ch.H., Nguyen-Thoi, T. and Lieu-Xuan, Q. (2014d), "Static and free vibration analyses of composite and sandwich plates by an edge-based smoothed discrete shear gap method (ESDSG3) using triangular elements based on layerwise theory", Compos. Part B: Eng., 60, 227-238. https://doi.org/10.1016/j.compositesb.2013.12.044
  29. Phung-Van, P., Nguyen-Thoi, T., Dang-Trung H. and Nguyen-Minh, N. (2014e), "A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) using layerwise theory based on the C0-HSDT for analyses of composite plates", Compos. Struct., 111, 553-565. https://doi.org/10.1016/j.compstruct.2014.01.038
  30. Phung-Van, P., Nguyen, L.B., Tran, L.V., Dinh, T.D., Thai, Ch.H., Bordas, S.P.A., Abdel-Wahab, M. and Nguyen-Xuan, H. (2015a), "An efficient computational approach for control of nonlinear transient responses of smart piezoelectric composite plates", Int. J. Nonlin. Mech., 76, 190-202. https://doi.org/10.1016/j.ijnonlinmec.2015.06.003
  31. Phung-Van, P., Nguyen-Thoi, T., Bui-Xuan, T. and Lieu-Xuan, Q. (2015b), "A cell-based smoothed threenode Mindlin plate element (CS-FEM-MIN3) based on the C0-type higher-order shear deformation for geometrically nonlinear analysis of laminated composite plates", Comput. Mat. Sci., 96, 549-558. https://doi.org/10.1016/j.commatsci.2014.04.043
  32. Phung-Van, P., Abdel-Wahab, M., Liew, K.M., Bordas, S.P.A. and Nguyen-Xuan H. (2015c), "Isogeometric analysis of functionally graded carbon nanotube-reinforced composite plates using higher-order shear deformation theory", Compos. Struct., 123, 137-149. https://doi.org/10.1016/j.compstruct.2014.12.021
  33. Phung-Van, P., De Lorenzis, L., Chien, H., Thai, M., and Nguyen-Xuan, H. (2015d), "Analysis of laminated composite plates integrated with piezoelectric sensors and actuators using higher-order shear deformation theory and isogeometric finite elements", Comput. Mat. Sci., 96, 495-505. https://doi.org/10.1016/j.commatsci.2014.04.068
  34. Putcha, N.S. and Reddy, J.N. (1986), "Stability and natural vibration analysis of laminated plates by using a mixed element based on a refined plate theory", J. Sound Vib., 104(2), 285-300. https://doi.org/10.1016/0022-460X(86)90269-5
  35. Reddy, J.N. (2010), "Nonlocal nonlinear formulations for bending of classical and shear deformation theories of beams and plates", Int. J. Eng. Sci., 48(11), 1507-1512. https://doi.org/10.1016/j.ijengsci.2010.09.020
  36. Sahoo, R. and Singh, B.N. (2013a), "A new shear deformation theory for the static analysis of laminated composite and sandwich plates", Int. J. Mech. Sci., 75, 324-344. https://doi.org/10.1016/j.ijmecsci.2013.08.002
  37. Sahoo, R. and Singh, B.N. (2013a), "A new inverse hyperbolic zigzag theory for the static analysis of laminated composite and sandwich plates", Compos. Struct., 105, 385-397. https://doi.org/10.1016/j.compstruct.2013.05.043
  38. Sahoo, R. and Singh, B.N. (2014), "A new trigonometric zigzag theory for static analysis of laminated composite and sandwich plates", Aero Sci. Tech., 35, 15-27. https://doi.org/10.1016/j.ast.2014.03.001
  39. Samaei, A.T., Abbasion, S. and Mirsayar, M.M. (2011), "Buckling analysis of a single-layer graphene sheet embedded in an elastic medium based on nonlocal Mindlin plate theory", Mech. Res. Commun., 38(7), 481-485. https://doi.org/10.1016/j.mechrescom.2011.06.003
  40. Sayyad, A.S. and Ghugal, Y.M. (2014), "A new shear and normal deformation theory for isotropic, transversely isotropic, laminated composite and sandwich plates", Int. J. Mech. Mater. Des., 10(3), 247-255. https://doi.org/10.1007/s10999-014-9244-3
  41. Srinivas, S. (1973), "A refined analysis of composite laminates", J. Sounds Vib., 30(4), 495-507. https://doi.org/10.1016/S0022-460X(73)80170-1
  42. Thai, Ch.H., Kulasegaram, S., Tran, L.V. and Nguyen-Xuan, H. (2014), "Generalized shear deformation theory for functionally graded isotropic and sandwich platesbased on isogeometric approach", Comput. Struct., 141, 94-112. https://doi.org/10.1016/j.compstruc.2014.04.003
  43. Tran, L.V., Thai, Ch.H. and Nguyen-Xuan, H. (2013), "An isogeometric finite element formulation for thermal buckling analysis of functionally graded plates", Finite Elem. Anal. Des., 73, 65-76. https://doi.org/10.1016/j.finel.2013.05.003
  44. Vidal, P. and Polit, O. (2013), "A refined sinus plate finite element for laminated and sandwich structures under mechanical and thermomechanical loads", Comput. Methods Appl. Mech. Eng., 253, 396-404. https://doi.org/10.1016/j.cma.2012.10.002

피인용 문헌

  1. A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates vol.184, 2018, https://doi.org/10.1016/j.compstruct.2017.10.047
  2. Vibration of size-dependent functionally graded sandwich microbeams with different boundary conditions based on the modified couple stress theory 2017, https://doi.org/10.1177/1099636217738909
  3. Buckling analysis of nanocomposite cut out plate using domain decomposition method and orthogonal polynomials vol.22, pp.3, 2016, https://doi.org/10.12989/scs.2016.22.3.691
  4. A refined quasi-3D shear deformation theory for thermo-mechanical behavior of functionally graded sandwich plates on elastic foundations 2017, https://doi.org/10.1177/1099636217727577
  5. Isogeometric buckling analysis of composite variable-stiffness panels vol.165, 2017, https://doi.org/10.1016/j.compstruct.2017.01.016
  6. Thermo-electro-mechanical vibration analysis of piezoelectric nanoplates resting on viscoelastic foundation with various boundary conditions vol.131-132, 2017, https://doi.org/10.1016/j.ijmecsci.2017.08.031
  7. Liouville-Green approximation: An analytical approach to study the elastic waves vibrations in composite structure of piezo material vol.184, 2018, https://doi.org/10.1016/j.compstruct.2017.10.031
  8. A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate vol.60, pp.4, 2016, https://doi.org/10.12989/sem.2016.60.4.547
  9. Approximation of surface wave velocity in smart composite structure using Wentzel–Kramers–Brillouin method pp.1530-8138, 2018, https://doi.org/10.1177/1045389X18786464
  10. Bending analysis of functionally graded plates using new eight-unknown higher order shear deformation theory vol.62, pp.3, 2017, https://doi.org/10.12989/sem.2017.62.3.311
  11. Shear buckling analysis of laminated plates on tensionless elastic foundations vol.24, pp.6, 2016, https://doi.org/10.12989/scs.2017.24.6.697
  12. An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates vol.25, pp.3, 2016, https://doi.org/10.12989/scs.2017.25.3.257
  13. A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate vol.25, pp.4, 2017, https://doi.org/10.12989/scs.2017.25.4.389
  14. A new quasi-3D HSDT for buckling and vibration of FG plate vol.64, pp.6, 2016, https://doi.org/10.12989/sem.2017.64.6.737
  15. An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions vol.25, pp.6, 2016, https://doi.org/10.12989/scs.2017.25.6.693
  16. Vibration analysis of thick orthotropic plates using quasi 3D sinusoidal shear deformation theory vol.16, pp.2, 2016, https://doi.org/10.12989/gae.2018.16.2.141
  17. Position optimization of circular/elliptical cutout within an orthotropic rectangular plate for maximum buckling load vol.29, pp.1, 2016, https://doi.org/10.12989/scs.2018.29.1.039
  18. Post-buckling analysis of shear-deformable composite beams using a novel simple two-unknown beam theory vol.65, pp.5, 2016, https://doi.org/10.12989/sem.2018.65.5.621
  19. Improved HSDT accounting for effect of thickness stretching in advanced composite plates vol.66, pp.1, 2016, https://doi.org/10.12989/sem.2018.66.1.061
  20. Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates vol.14, pp.6, 2016, https://doi.org/10.12989/gae.2018.14.6.519
  21. Free vibration and buckling analysis of orthotropic plates using a new two variable refined plate theory vol.15, pp.1, 2016, https://doi.org/10.12989/gae.2018.15.1.711
  22. A novel four-unknown quasi-3D shear deformation theory for functionally graded plates vol.27, pp.5, 2016, https://doi.org/10.12989/scs.2018.27.5.599
  23. Single variable shear deformation model for bending analysis of thick beams vol.67, pp.3, 2016, https://doi.org/10.12989/sem.2018.67.3.291
  24. A novel quasi-3D hyperbolic shear deformation theory for vibration analysis of simply supported functionally graded plates vol.22, pp.3, 2016, https://doi.org/10.12989/sss.2018.22.3.303
  25. A refined quasi-3D hybrid-type higher order shear deformation theory for bending and Free vibration analysis of advanced composites beams vol.27, pp.4, 2016, https://doi.org/10.12989/was.2018.27.4.269
  26. Finite element solution of stress and flexural strength of functionally graded doubly curved sandwich shell panel vol.16, pp.1, 2016, https://doi.org/10.12989/eas.2019.16.1.055
  27. Vibration response and wave propagation in FG plates resting on elastic foundations using HSDT vol.69, pp.5, 2016, https://doi.org/10.12989/sem.2019.69.5.511
  28. A simple HSDT for bending, buckling and dynamic behavior of laminated composite plates vol.70, pp.3, 2019, https://doi.org/10.12989/sem.2019.70.3.325
  29. Multiscale modeling approach for thermal buckling analysis of nanocomposite curved structure vol.7, pp.3, 2019, https://doi.org/10.12989/anr.2019.7.3.181
  30. Interfacial imperfection study in pres-stressed rotating multiferroic cylindrical tube with wave vibration analytical approach vol.6, pp.10, 2016, https://doi.org/10.1088/2053-1591/ab3880
  31. Cut out effect on nonlinear post-buckling behavior of FG-CNTRC micro plate subjected to magnetic field via FSDT vol.7, pp.6, 2016, https://doi.org/10.12989/anr.2019.7.6.405
  32. On the modeling of dynamic behavior of composite plates using a simple nth-HSDT vol.29, pp.6, 2016, https://doi.org/10.12989/was.2019.29.6.371
  33. A refined HSDT for bending and dynamic analysis of FGM plates vol.74, pp.1, 2020, https://doi.org/10.12989/sem.2020.74.1.105
  34. Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory vol.25, pp.4, 2016, https://doi.org/10.12989/sss.2020.25.4.409