한국유체기계학회 논문집 (The KSFM Journal of Fluid Machinery)

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

비투멘 유체 분리를 위한 오일처리공정의 설계와 평가

Design and Assessment of an Oil-treatment Process for Bitumen Separation

  • 정문 (성진이앤티(주)) ;
  • 이상준 (성진이앤티(주)) ;
  • 신흥식 (성진이앤티(주)) ;
  • 조은비 (한국건설기술연구원 환경플랜트연구소) ;
  • 황인주 (한국건설기술연구원 환경플랜트연구소) ;
  • 강춘형 (전남대학교 응용화학공학부)
  • Jeong, Moon (SUNGJIN E&T R&D Center) ;
  • Lee, Sang-Jun (SUNGJIN E&T R&D Center) ;
  • Shin, Heung-Sik (SUNGJIN E&T R&D Center) ;
  • Jo, Eun-Bi (Environmental & Plant Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Hwang, In-Ju (Environmental & Plant Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Kang, Choon-Hyung (School of Applied Chemical Engineering, Chonnam National University)
  • 투고 : 2016.03.29
  • 심사 : 2016.04.30
  • 발행 : 2016.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this paper is to define criteria to be used as part of the engineering design for an oil sands plant equipped with the steam assisted gravity drainage process. In this effort, the oil treatment process of an oil sands plant on a pilot scale was focused for detailed investigation. The thermodynamic properties of the process fluid, which is mainly composed of bitumen and water, were estimated with the CPA model. The commercial tool aspen HYSYS was used for the analysis throughout this work along with the provided input data and some necessary assumptions. From the simulation results, the heat and mass balances for a 300 BPD plant were established in order to define standard data for its modular design. In particular, the basis of design for equipment size, heat transfer areas, capital cost and operation cost was extensively discussed.

키워드

참고문헌

  1. Peck, W., 2015, The Oil Sands Market Report 2015-2025, visiongain, London.
  2. Cho, J. D., Kim, J. H., and Park, K. S., 2014, "Trend of the Unconventional Energy Resources," Econ. Environ. Geol., Vol. 47, No. 3, pp. 265-273. https://doi.org/10.9719/EEG.2014.47.3.265
  3. Alboudwarej, H., 2006, Highlighting Heavy Oil, Oilfield Review, Edmonton.
  4. Bhattacharjee, S., 2010, Oil Sands, University of Alberta, Edmonton.
  5. Arya, A., Solms, N., and Kontogeorgis, G. M., 2015, "Determination of asphaltene onset conditions using the cubic plus association equation of state," Vol. 400, No. 25, pp. 8-19. https://doi.org/10.1016/j.fluid.2015.04.032
  6. Kim, I. and Hartono, A., 2004, Calculation of Vapor-Liquid Equilibria for Methanol-Water Mixture using Cubic-Plus-Association Equation of State, NTNU, Trondheim.
  7. Yeo, G. C., 2010, "Plant modeling, Applications of an engineering model under an operating environment," NICE, Vol. 28, No. 1, 32-36.
  8. Oelke, H., 2011, Basis of design specification, Propak, Calgary.
  9. Giacchettaa, G., Leporinia, M., and Marchettib, B., 2015, "Economic and environmental analysis of a Steam Assisted Gravity Drainage (SAGD) facility for oil recovery from Canadian oil sands," Applied Energy, Vol. 142, No. 15, pp. 1-9. https://doi.org/10.1016/j.apenergy.2014.12.057