참고문헌
- H. Honma, Plating technology for electronics packaging, Electrochem. Acta 47 (2001) 75-84. https://doi.org/10.1016/S0013-4686(01)00591-6
- C. Leon, R. Drew, Preparation of nickel-coated powders as precursors to reinforce MMCs, J. Matter. Sci 35 (2000) 4763-4768. https://doi.org/10.1023/A:1004860326071
- I.S. Kim, S.K. Lee, Fabrication of carbon nanofiber/ Cu composite powder by electroless plating and microstructural evolution during thermal exposure, Scripta. Mater 52 (2005) 1045-1049. https://doi.org/10.1016/j.scriptamat.2005.01.022
- M. Paunovic, M. Schlesinger, Fundamentals of electrochemical deposition, wiley, New York (1998) 133-149.
- F. Touyeras, J.Y. Hihn, X. Bourgoin, B. Jacques, L. Hallez, V. Branger, Effects of ultrasonic irradiation on the properties of coatings obtained by electroless plating and electro plating, Ultrason Sonochem 12 (2005) 13-19. https://doi.org/10.1016/j.ultsonch.2004.06.002
- H. Ashassi-Sorkhabi, M. Moradi-Haghighi, M.G. Hosseini, Effect of rare earth (Ce, La) compounds in the electroless bath on the plating rate, bath stability and microstructure of the nickel-phosphorus deposits, Surf. Coat. Tech 202 (2008) 1615-1620. https://doi.org/10.1016/j.surfcoat.2007.07.019
- J. M. Cordoba, M. Oden, Growth and characterization of electroless deposited Cu films on carbon nanofibers, Surf. Coat. Tech 203 (2009) 3459-3464. https://doi.org/10.1016/j.surfcoat.2009.05.007
- E. Natividad, E. Lataste, M. Lahaye, J.M. Heintz, J.F. Silvain, Chemical and morphological study of the sensitisation, activation and Cu electroless plating of Al2O3 polycrystalline substrate, Surf. Sci 557 (2004) 129-143. https://doi.org/10.1016/j.susc.2004.03.026
- M. Charbonnier, M. Alami, M. Romand, Electroless plating of polymers: XPS study of the initiation mechanisms, J. Appl. Electrochem 28 (1998) 449-453. https://doi.org/10.1023/A:1003204909001
- S. Shukla, S. Seal, Electroless copper coating of zirconia utilizing palladium catalyst, J. Am. Ceram. Soc 86 (2003) 279-285. https://doi.org/10.1111/j.1151-2916.2003.tb00012.x
- S. Shukla, S. Seal, J. Akesson, R. Oder, R. Carter, Z. Rahman, Study of mechanism of electroless copper coating of fly-ash cenosphere particles, Appl. Surf. Sci 181 (2001) 35-50. https://doi.org/10.1016/S0169-4332(01)00341-5
- J. Silvain, J. Chazelas, S. Trombert, Copper electroless deposition on NiTi shape memory alloy: an XPS study of Sn-Pd-Cu growth, Appl. Surf. Sci 153 (2000) 211-217. https://doi.org/10.1016/S0169-4332(99)00280-9
- L. Xu, J. Liao, L. Huang, D. Ou, Z. Guo, H. Zhang, C. Ge, N. Gu, J. Liu, Surface-bound nanoparticles for initiating metal deposition, Thin Solid Films 434 (2003) 121-125. https://doi.org/10.1016/S0040-6090(03)00274-8
- K. Pietrzak, N. Sobczak, M. Chmielewski, M. Homa, A. Gazda, R. Zybala, A. Strojny-Nedza, Effects of Carbon Allotropic Forms on Microstructure and Thermal Properties of Cu-C Composites Produced by SPS, J. Mater. Eng. Perform (2016).
- A. K. Shukla, N. Nayan, S. V. S. N. Murty, S.C. Sharma, P. Chandran, S.R. Bakshi, K.M. George, Processing of copper-carbon nanotube composites by vacuum hot pressing technique, Materials Science and Engineering: A 560 (2013) 365-371. https://doi.org/10.1016/j.msea.2012.09.080
- S. Ip, R. Sridhar, J. Toguri, T. Stephenson, A. Warner, Wettability of nickel coated graphite by aluminum, Materials Science and Engineering: A 244 (1998) 31-38. https://doi.org/10.1016/S0921-5093(97)00823-X
- A. Urena, J. Rams, M.D. Escalera, M. Sanchez, Effect of copper electroless coatings on the interaction between a molten Al-Si-Mg alloy and coated short carbon fibres, Composites Part A: Applied Science and Manufacturing 38 (2007) 1947-1956. https://doi.org/10.1016/j.compositesa.2007.02.005
- K. LASZLO, K. JOSEPOVITS, E. TOMBACZ, Analysis of active sites on synthetic carbon surfaces by various methods, Analytical Sciences/Supplements 17 (2002) i1741-i1744.
- G. Zhang, S. Sun, D. Yang, J.-P. Dodelet, E. Sacher, The surface analytical characterization of carbon fibers functionalized by H2SO4/HNO3 treatment, Carbon 46 (2008) 196-205. https://doi.org/10.1016/j.carbon.2007.11.002
- A. J. Plomp, D. S. Su, K. d. Jong, J. H. Bitter, On the Nature of Oxygen-Containing Surface Groups on Carbon Nanofibers and Their Role for Platinum Deposition? An XPS and Titration Study, The Journal of Physical Chemistry C 113 (2009) 9865-9869. https://doi.org/10.1021/jp900637q
- J. F. Moulder, W. F. Stickle, P. E. Sobol, K. D. Bomben, Handbook of X-ray photoelectron spectroscopy, Perkin-Elmer, Eden Prairie, MN (1992)
- D. Briggs, M.P. Seah, Practical Surface Analysis, Auger and X-ray Photoelectron Spectroscopy, second Ed, Wiley, Chichester (1990).
- M. Charbonnier, M. Romand, E. Harry, M. Alami, Surface plasma functionalization of polycarbonate: Application to electroless nickel and copper plating, J. Appl, Electrochem 31 (2001) 57-63. https://doi.org/10.1023/A:1004161707536