펄프종이기술 (Journal of Korea Technical Association of The Pulp and Paper Industry)

한국펄프종이공학회 (Korea Technical Association of the Pulp and Paper Industry)
권호 표지
DOI QR코드

DOI QR Code

혼합접착제 적용에 따른 골판지의 접착강도와 건조에너지 평가

Evaluation of the Adhesive Strength and the Drying Energy of Corrugated Board Using a Mixed Adhesive

  • 이지영 (경상대학교 환경재료과학과/농업생명과학연구원) ;
  • 김철환 (경상대학교 환경재료과학과/농업생명과학연구원) ;
  • 김은혜 (경상대학교 임산공학과) ;
  • 박태웅 (경상대학교 환경재료과학과) ;
  • 최재성 (원창포장공업주식회사)
  • Lee, Ji Young (Dept. of Environmental Materials Science/IALS, Gyeongsang National University) ;
  • Kim, Chul Hwan (Dept. of Environmental Materials Science/IALS, Gyeongsang National University) ;
  • Kim, Eun Hea (Dept. of Forest Products, Gyeongsang National University) ;
  • Park, Tae Ung (Dept. of Environmental Materials Science, Gyeongsang National University) ;
  • Choi, Jae Sung (Wonchang Packaging)
  • 투고 : 2016.05.25
  • 심사 : 2016.06.16
  • 발행 : 2016.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The most widely used glue in a corrugator is starch, which is a natural polymer. This material needs thermal energy to achieve a binding force, so a heating section is installed in a corrugator. However, this heating section can cause quality problems in linerboards and corrugating medium and increase the production cost because of the high cost of fossil resources. Therefore, a new adhesive that provides the binding force at lower temperatures than the conventional one must be developed. In this study, SB-latex was selected as a co-adhesive and added to the starch solution. The addition of the SB-latex was determined based on the viscosity of the new adhesive. The adhesive strength and the drying energy reduction of a corrugated board were measured to evaluate the functionalities of the new adhesive. The addition of SB-latex was determined to be under 20% of the oven-dried starch based on the viscosity of the new adhesive. The adhesive strength was improved and the drying energy was reduced by applying the new adhesive.

키워드

참고문헌

  1. Kim, C., Corrugated board manufacture and application, Packaging industry, pp. 11-22 (2009).
  2. Lee, J. Y., Yoon, H. Y., Oh, S. J., Sung, Y. J., Kim, B. H., Lim, G. B., Choi, J. S., and Kim, S. Y., Development of nonwoven fabric and new adhesive system to manufacture hybrid corrugated board, Journal of Korea TAPPI 44(3): 49-55(2012).
  3. Kim, C. H., Kim, J. O., Jung, J. H., and Cho, S. H., Exploration of Optimum Retention of Antibacterial Agents in Functional Packaging Paper, J Korean Soc Food Sci Nutr 34(2): 298-305(2005). https://doi.org/10.3746/jkfn.2005.34.2.298
  4. Lehtinen, E., Coating binders - general, Papermaking Science and Technology, Vol. 11, Ch. 13, TAPPI Press, Atlanta, pp. 188-195 (1997).
  5. Lee, J. Y., Kim, C. H., Choi, J. S., Oh, S. J., Kim, B. H., Lim, G. B., Kim, S. Y., and Kim, J. S., Evaluation of Antibacterial Property and Freshness Maintenance of Functional Hybrid Corrugated Board Used for Agricultural Products, Journal of Korea TAPPI 45(3): 45-51 (2013).
  6. Lee, J. Y., Kim, Y. H., Lee, S. R., Kim, C. H., Sung, Y. J., Lim, G. B., Kim, S. Y., Kim, J. S., and Park, J. H., Effect of Precipitated Calcium Carbonate on Paper Properties and Drying Energy Reduction of Duplex-board, Journal of Korea TAPPI 45(6): 24-29(2013).