DOI QR코드

DOI QR Code

유동 비등 시스템에서 산화 그래핀 나노유체의 열전달 및 파울링에 대한 연구

Study on Heat Transfer and Fouling of Flow Boiling Systems using Oxidized Graphene Nanofluid

  • 김우중 (제주국제대학교 산학협력단) ;
  • 김남진 (제주대학교 에너지공학과)
  • Kim, Woo-Joong (Industry-Academic Cooperation Foundation, Jeju International University) ;
  • Kim, Nam-Jin (Department of Nuclear and Energy Engineering, Jeju National University)
  • 투고 : 2016.04.14
  • 심사 : 2016.05.20
  • 발행 : 2016.06.30

초록

The nanofluids are the fluids with excellent thermal property, it is expected as a working fluid of the next generation. The nanofluids are well known that if it is used in the boiling heat transfer system, the critical heat flux is enhanced up to 200%, and the thermal conductivity is increased up to from 10 to 160%. However, the fouling phenomenon can be occurred that nanoparticles of nanofluids are deposited on the heat transfer surface. Therefore, to investigate relation between nanofluid and fouling, this study is carried out using oxidized graphene nanofluid. Also it compared and analyzed the critical heat flux and the boiling heat transfer coefficient. As the result, in case of oxidized graphene deposition for fouling, the critical heat flux is increased up to 20% more than oxdized graphene nanofluid. However, the boiling heat transfer coefficient is decreased down to about $6kW/m^2K$ at $1,000kW/m^2$ more than pure water.

키워드

참고문헌

  1. S. K. Das, S. U. Choi, W. Yu, and T. Pradeep, Nanofluids : science and technology, John Wiley and Sons, 2008.
  2. Y. Li, J. Zhou, S. Tung, E. Schneider, and S. Xi, A review on development of nanofluid preparation and characterization, Powder Technology, Vol. 196, No. 2, pp. 89-101, 2009. https://doi.org/10.1016/j.powtec.2009.07.025
  3. J. Barber, D. Brutin, and L. Tadrist, A review on boiling heat transfer enhancement with nanofluids, Nanoscale Research Letters, Vol. 6, pp.1-16, 2011.
  4. J. M. Wu, J. Zhou, A review of nanofluid heat transfer and critical heat flux enhancement-research gap to engineering application, Progress in Nuclear Energy, Vol. 66, pp. 13-24, 2013. https://doi.org/10.1016/j.pnucene.2013.03.009
  5. Ahn. H. S, Kim. H. D, Jo. H. J, Kang. S. H, Chang. W. P, and Kim. M. H, Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface, International Journal of Multiphase Flow, Vol. 36, No. 5, pp. 375-384, 2010. https://doi.org/10.1016/j.ijmultiphaseflow.2010.01.004
  6. H. Peng, G. Ding, W. Jiang, H. Hu, and Y. Gao, Heat transfer characteristics of refrigerant-based nanofluid flow boiling inside a horizontal smooth tube, International Journal of Refrigeration, Vol. 32, No. 6, pp. 1259-1270, 2009. https://doi.org/10.1016/j.ijrefrig.2009.01.025
  7. J. Lee, and I. Mudawar, Assessment of the effectiveness of nanofluids for single-phase and two-phase heat transfer in micro-channels, International Journal of Heat and Mass Transfer, Vol. 50, No. 3-4, pp. 452-463, 2007. https://doi.org/10.1016/j.ijheatmasstransfer.2006.08.001
  8. S. J. Kline, and F. A. McClintock, Describing uncertainties in single-sample experiment, Mechanical Engineer, Vol. 75, pp. 3-8, 1953.
  9. N. Zuber, On stability of boiling heat transfer, ASME transactions, Vol. 80, pp. 711-714, 1958.
  10. Y. Katto, and C. Kurata, Critical heat flux of saturated convective boiling on uniformly heated plates in a parallel flow, International Journal of Multiphase Flow, Vol. 6, No. 6, pp. 575-582, 1980. https://doi.org/10.1016/0301-9322(80)90052-X
  11. Lee. S. W, Kim. K. M, and Bang. I. C, Study on flow boiling critical heat flux enhancement of graphene oxide/water nanofluid, International Journal of Heat and Mass Transfer, Vol. 65, pp. 348-356, 2013. https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.013
  12. K. Henderson, Park. Y. G, L. Liu, and Jacobi. A. M, Flow-boiling heat transfer of R-134a-based nanofluids in a horizontal tube, International Journal of Heat and Mass Transfer, Vol. 53, No. 5-6, pp. 944-951, 2009. https://doi.org/10.1016/j.ijheatmasstransfer.2009.11.026
  13. M. M. Sarafraz, F. Hormozi, and S. M. Peyghambarzadeh, Role of nanofluid fouling on thermal performance of a thermosyphon:Are nanofluids reliable working fluid?, Applied Thermal Engineering, Vol. 82, pp. 214-224, 2015.
  14. Park. S. S, Kim. Y. H, Jeon. Y. H, Hyun. M. T, and Kim. N. J, Effects of spray-deposited oxidized multi-wall carbon nanotubes and graphene on pool-boiling critical heat flux enhancement, Journal of Industrial and Engineering Chemistry, Vol. 24, pp. 276-283, 2015. https://doi.org/10.1016/j.jiec.2014.09.041
  15. Lee. S. W, Park. S. D, Kang. S, Kim S. M, Seo. H, Lee. D. W, Bang I. C, Critical heat flux enhancement in flow boiling of $Al_2O_3$ and SiC nanofluids under low pressure and low flow conditions, Nuclear Engineering and Technology, Vol. 44, No. 4, pp. 429-436, 2012. https://doi.org/10.5516/NET.04.2012.516
  16. Mostafa M. Awad, Fouling of heat transfer surfaces, Heat transfer - Theoretical analysis, experimental investigations and industrial systems, pp. 505-542, 2011.

피인용 문헌

  1. An Experimental Study on the Solar Radiation for heat Absorption Characteristic of CNT Nanofluids vol.23, pp.6, 2019, https://doi.org/10.9726/kspse.2019.23.6.019