한국수소및신에너지학회논문집 (Journal of Hydrogen and New Energy)

  • 제27권3호
  • /
  • Pages.264-269
  • /
  • 2016
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

Pd 조촉매가 도입된 PEMFC용 Pt/GDE 제조 및 특성

Preparation and Characteristics of Pt/GDE Loaded with Pd Promoter for PEMFC

  • 이홍기 (우석대학교 수소연료전지 부품 및 응용기술 지역혁신센터) ;
  • 이우금 (우석대학교 에너지공학과)
  • LEE, HONGKI (Hydrogen Fuel Cell Regional Innovation Center, Woosuk University) ;
  • LEE, WOOKUM (Department of Energy Engineering, Woosuk University)
  • 투고 : 2016.05.23
  • 심사 : 2016.06.30
  • 발행 : 2016.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A simple dry chemical approach was developed in order to load palladium (Pd) as a promoter on Pt/gas diffusion electrode (GDE) for polymer electrolyte membrane fuel cell (PEMFC). Palladium(II) bis (acetylacetonate), $Pd(acac)_2$ was sublimed, penetrated into Pt/GDE and then reduced to Pd nanoparticles simultaneously without any reducing agent and any solvent in a glass reactor of $N_2$ atmosphere at $180^{\circ}C$ for 3, 5 and 15 min. Pd distribution was analyzed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), and I-V curve was estimated by using a unit cell with $5{\times}5cm^2$ active area.

키워드

참고문헌

  1. D. Aaron, S. Yiacoumi, and C. Tsouris, "Effects of Proton-Exchange Membrane Fuel-Cell Operating Conditions On Charge Transfer Resistances Measured by Electrochemical Impedance Spectroscopy", Sep. Sci. Technol., Vol. 43, No. 9, 2008, p. 2307. https://doi.org/10.1080/01496390802148613
  2. S. R. Samms, S. Wasmus, R. F. Savinell, "Thermal Stability of Nafion in Simulated Fuel Cell Environments", J. Electrochem. Soc., Vol. 143, No. 5, 1996, p. 1498. https://doi.org/10.1149/1.1836669
  3. D. W. Jung, S. Park, J. T. Kang, and J. B. Kim, "Synthesis of Carbon Nanotubes Supported PtCo Electrocatalysts and Its Characterization for the Cathode Electrode of PEMFC", Kor. J. Mater. Res., Vol. 19, No. 5, 2009, p. 233. https://doi.org/10.3740/MRSK.2009.19.5.233
  4. F. Barbir and T. Gomez, "Efficiency and economics of proton exchange membrane (PEM) fuel cells", Int. J. Hydrogen Energy, Vol. 21, No. 10, 1996, p. 891. https://doi.org/10.1016/0360-3199(96)00030-4
  5. S. D. Knights, K. M. Colbow, J. St-Pierre, and D. P. Wilkinson, "Aging mechanisms and lifetime of PEFC and DMFC", J. Power Sources, Vol. 127, No. 1-2, 2004, p. 127. https://doi.org/10.1016/j.jpowsour.2003.09.033
  6. F. P. Orfino and S. Holdcroft, "The Morphology of Nafion: are ion clusters bridged by channels or single ionic sites?", J. New Mat. Electrochem. Syst., Vol. 3 No. 4, 2000, p. 287.
  7. J. W. Yang, C. G. Choi, H. I. Joh, J. J. Park, and Y. C. Kwon, "A Study on Oxygen Reduction Reaction of PtM Electrocatalysts Synthesized on Graphene for Proton Exchange Membrane Fuel Cell", Trans. of the Korean Hydrogen and New Energy Society, Vol. 25, No. 4, 2014, p. 378. https://doi.org/10.7316/KHNES.2014.25.4.378
  8. M. Watanabe, H. Uchida, and M. Emori, "Analyses of Self-Humidification and Suppression of Gas Crossover in Pt-Dispersed Polymer Electrolyte Membranes for Fuel Cells", J.Electrochem. Soc., Vol. 145, No. 4, 1998, p. 1137. https://doi.org/10.1149/1.1838429
  9. J. Y. Lee, D. Yin, and S. Horiuchi, "Site and Morphology Controlled ZnO Deposition on Pd Catalyst Prepared from Pd/PMMA Thin Film Using UV Lithography", Chem. of Mater., Vol. 17, No. 22, 2005, p. 5498. https://doi.org/10.1021/cm0506555
  10. J. Y. Lee, Y. Liao, R. Nagahata, and S. Horiuchi, "Effect of Metal Nanoparticles on Thermal Stabilization of Polymer/metal Nanocomposites Prepared by a One-step Dry Process", Polymer, Vol. 47, No. 23, 2006, p. 7970. https://doi.org/10.1016/j.polymer.2006.09.034