DOI QR코드

DOI QR Code

Seismic response of spring-damper-rolling systems with concave friction distribution

  • Wei, Biao (School of Civil Engineering, Central South University) ;
  • Wang, Peng (School of Civil Engineering, Central South University) ;
  • He, Xuhui (School of Civil Engineering, Central South University) ;
  • Jiang, Lizhong (School of Civil Engineering, Central South University)
  • 투고 : 2016.03.31
  • 심사 : 2016.05.27
  • 발행 : 2016.07.25

초록

The uneven distribution of rolling friction coefficient may lead to great uncertainty in the structural seismic isolation performance. This paper attempts to improve the isolation performance of a spring-damper-rolling isolation system by artificially making the uneven friction distribution to be concave. The rolling friction coefficient gradually increases when the isolator rolls away from the original position during an earthquake. After the spring-damper-rolling isolation system under different ground motions was calculated by a numerical analysis method, the system obtained more regular results than that of random uneven friction distributions. Results shows that the concave friction distribution can not only dissipate the earthquake energy, but also change the structural natural period. These functions improve the seismic isolation efficiency of the spring-damper-rolling isolation system in comparison with the random uneven distribution of rolling friction coefficient, and always lead to a relatively acceptable isolation state even if the actual earthquake significantly differs from the design earthquake.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Antonyuk, E.Y. and Plakhtienko, N.P. (2004), "Dynamic modes of one seismic-damping mechanism with frictional bonds", Int. Appl. Mech., 40(6), 702-708. https://doi.org/10.1023/B:INAM.0000041399.99257.b3
  2. Begley, C.J. and Virgin, L.N. (1998), "Impact response and the influence of friction", J. Sound Vib., 211(5), 801-818. https://doi.org/10.1006/jsvi.1997.1389
  3. Chung, L.L., Kao, P.S., Yang, C.Y., Wu, L.Y. and Chen, H.M. (2015), "Optimal frictional coefficient of structural isolation system", J. Vib. Control, 21(3), 525-538. https://doi.org/10.1177/1077546313487938
  4. Cui, S. (2012), "Integrated design methodology for isolated floor systems in single-degree-of-freedom structural fuse systems", Ph.D. Dissertation, State University of New York, Buffalo.
  5. Fahjan, Y. and Ozdemir, Z. (2008), "Scaling of earthquake accelerograms for non-linear dynamic analysis to match the earthquake design spectra", The 14th World Conference on Earthquake Engineering, Chinese Society for Earthquake Engineering, Beijing, China.
  6. Flom, D.G. and Bueche, A.M. (1959), "Theory of rolling friction for spheres", J. Appl. Phys., 30(11), 1725-1730. https://doi.org/10.1063/1.1735043
  7. Guerreiro, L., Azevedo, J. and Muhr, A.H. (2007), "Seismic tests and numerical modeling of a rolling-ball isolation system", J. Earthq. Eng., 11(1), 49-66. https://doi.org/10.1080/13632460601123172
  8. Harvey, P.S. and Gavin, H.P. (2013), "The nonholonomic and chaotic nature of a rolling isolation system", J. Sound Vib., 332(14), 3535-3551. https://doi.org/10.1016/j.jsv.2013.01.036
  9. Harvey, P.S. and Gavin, H.P. (2014), "Double rolling isolation systems: a mathematical model and experimental validation", Int. J. Non-Linear Mech., 61(1), 80-92. https://doi.org/10.1016/j.ijnonlinmec.2014.01.011
  10. Harvey, P.S. and Gavin, H.P. (2015), "Assessment of a rolling isolation system using reduced order structural models", Eng. Struct., 99, 708-725. https://doi.org/10.1016/j.engstruct.2015.05.022
  11. Harvey, P.S., Wiebe, R. and Gavin, H.P. (2013) "On the chaotic response of a nonlinear rolling isolation system", Physica D: Nonlinear Phenomena, 256-257, 36-42. https://doi.org/10.1016/j.physd.2013.04.013
  12. Harvey, P.S., Zehil, G.P. and Gavin, H.P. (2014), "Experimental validation of a simplified model for rolling isolation systems", Earthq. Eng. Struct. Dyn., 43(7), 1067-1088. https://doi.org/10.1002/eqe.2387
  13. Ismail, M. (2015), "An isolation system for limited seismic gaps in near-fault zones", Earthq. Eng. Struct. Dyn., 44(7), 1115-1137. https://doi.org/10.1002/eqe.2504
  14. Ismail, M. and Casas, J.R. (2014), "Novel isolation device for protection of cable-stayed bridges against near-fault earthquakes", J. Bridge Eng., 19(8), 50-65.
  15. Ismail, M., Rodellar, J. and Pozo, F. (2014), "An isolation device for near-fault ground motions", Struct. Control Hlth. Monit., 21(3), 249-268. https://doi.org/10.1002/stc.1549
  16. Ismail, M., Rodellar, J. and Pozo, F. (2015), "Passive and hybrid mitigation of potential near-fault inner pounding of a self-braking seismic isolator", Soil Dyn. Earthq. Eng., 69(2), 233-250. https://doi.org/10.1016/j.soildyn.2014.10.019
  17. Jangid, R.S. (2000), "Stochastic seismic response of structures isolated by rolling rods", Eng. Struct., 22(8), 937-946. https://doi.org/10.1016/S0141-0296(99)00041-3
  18. Jangid, R.S. and Londhe, Y.B. (1998), "Effectiveness of elliptical rolling rods for base isolation", J. Struct. Eng., 124(4), 469-472. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(469)
  19. JTJ004-89, Standard of the Ministry of Communications of P.R. China (1989), Specifications of Earthquake Resistant Design for Highway Engineering, China Communications Press, Beijing, China. (in Chinese)
  20. Kosntantinidis, D. and Makris, N. (2009), "Experimental and analytical studies on the response of freestanding laboratory equipment to earthquake shaking", Earthq. Eng. Struct. Dyn., 38(6), 827-848. https://doi.org/10.1002/eqe.871
  21. Kurita, K., Aoki, S., Nakanishi, Y., Tominaga, K. and Kanazawa, M. (2011), "Fundamental characteristics of reduction system for seismic response using friction force", J. Civ. Eng. Architec., 5(11), 1042-1047.
  22. Lee, G.C., Ou, Y.C., Niu, T.C., Song, J.W. and Liang, Z. (2010), "Characterization of a roller seismic isolation bearing with supplemental energy dissipation for highway bridges", J. Struct. Eng., 136(5), 502-510. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000136
  23. Lewis, A.D. and Murray, R.M. (1995), "Variational principles for constrained systems: Theory and experiment", Int. J. Non-Linear Mech., 30(6), 793-815. https://doi.org/10.1016/0020-7462(95)00024-0
  24. Nanda, R.P., Agarwal, P. and Shrikhande, M. (2012), "Base isolation system suitable for masonry buildings", Asian J. Civ. Eng. (Building and Housing), 13(2), 195-202.
  25. Ortiz, N.A., Magluta, C. and Roitman, N. (2015), "Numerical and experimental studies of a building with roller seismic isolation bearings", Struct. Eng. Mech., 54(3), 475-489. https://doi.org/10.12989/sem.2015.54.3.475
  26. Ou, Y.C., Song, J.W. and Lee, G.C. (2010), "A parametric study of seismic behavior of roller seismic isolation bearings for highway bridges", Earthq. Eng. Struct. Dyn., 39(5), 541-559. https://doi.org/10.1002/eqe.958
  27. Siringoringo, D.M. and Fujino, Y. (2015), "Seismic response analyses of an asymmetric base-isolated building during the 2011 Great East Japan (Tohoku) Earthquake", Struct. Control Hlth. Monit., 22(1), 71-90. https://doi.org/10.1002/stc.1661
  28. Tsai, C.S., Lin, Y.C., Chen, W.S. and Su, H.C. (2010), "Tri-directional shaking table tests of vibration sensitive equipment with static dynamics interchangeable-ball pendulum system", Earthq. Eng. Eng. Vib., 9(1), 103-112. https://doi.org/10.1007/s11803-010-9009-4
  29. Wang, S.J., Hwang, J.S., Chang, K.C., Shiau, C.Y., Lin, W.C., Tsai, M.S., Hong, J.X. and Yang, Y.H. (2014), "Sloped multi-roller isolation devices for seismic protection of equipment and facilities", Earthq. Eng. Struct. Dyn., 43(10), 1443-1461. https://doi.org/10.1002/eqe.2404
  30. Wang, Y.J., Wei, Q.C., Shi, J. and Long, X.Y. (2010), "Resonance characteristics of two-span continuous beam under moving high speed trains", Latin Am. J. Solid. Struct., 7(2), 185-199. https://doi.org/10.1590/S1679-78252010000200005
  31. Wei, B., Cui, R.B. and Dai, G.L. (2013), "Seismic performance of a rolling-damper isolation system", J. Vibroeng., 15(3), 1504-1512.
  32. Wei, B., Dai, G.L., Wen, Y. and Xia, Y. (2014), "Seismic performance of an isolation system of rolling friction with spring", J. Central South Univ., 21(4), 1518-1525. https://doi.org/10.1007/s11771-014-2092-3
  33. Wei, B., Xia, Y. and Liu, W.A. (2014), "Lateral vibration analysis of continuous bridges utilizing equal displacement rule", Latin Am. J. Solid. Struct., 11(1), 75-91. https://doi.org/10.1590/S1679-78252014000100005
  34. Wei, B., Yang, T.H. and Jiang, L.Z. (2015), "Influence of friction variability on isolation performance of a rolling-damper isolation system", J. Vibroeng., 17(2), 792-801.
  35. Yim, C.S., Chopra, A.K. and Penzien, J. (1980), "Rocking response of rigid blocks to earthquakes", Earthq. Eng. Struct. Dyn., 8(6), 565-587. https://doi.org/10.1002/eqe.4290080606
  36. Yin, C.F. and Wei, B. (2013), "Numerical simulation of a bridge-subgrade transition zone due to moving vehicle in Shuohuang heavy haul railway", J. Vibroeng., 15(2), 1062-1068.

피인용 문헌

  1. Seismic Isolation Characteristics of a Friction System vol.46, pp.4, 2018, https://doi.org/10.1520/JTE20160598
  2. Performance of bi-directional elliptical rolling rods for base isolation of buildings under near-fault earthquakes 2018, https://doi.org/10.1177/1369433217726896
  3. Methodology for the simultaneous optimization of location and parameters of friction dampers in the frequency domain pp.1029-0273, 2018, https://doi.org/10.1080/0305215X.2018.1428318
  4. The effect of base isolation and tuned mass dampers on the seismic response of RC high-rise buildings considering soil-structure interaction vol.17, pp.4, 2016, https://doi.org/10.12989/eas.2019.17.4.425
  5. Analysis of an Isolation System with Vertical Spring-viscous Dampers in Horizontal and Vertical Ground Motion vol.10, pp.4, 2020, https://doi.org/10.3390/app10041411