Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지)

Korean Academy of Stomatognathic Function and Occlusion (대한턱관절교합학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of computer-aided design/computer-aided manufacturing complete denture and conventional complete denture: case report

CAD/CAM system과 전통적인 방법을 이용한 총의치 동시 제작 증례

  • Kim, Mi-Jin (Department of Prosthodontics, Sahmyook Adventist Dental Hospital) ;
  • Kim, Kang-Ho (Department of Prosthodontics, Sahmyook Adventist Dental Hospital) ;
  • Yeo, Dong-Heon (Department of Prosthodontics, Sahmyook Adventist Dental Hospital)
  • 김미진 (삼육치과병원 치과보철과) ;
  • 김강호 (삼육치과병원 치과보철과) ;
  • 여동헌 (삼육치과병원 치과보철과)
  • Received : 2016.05.20
  • Accepted : 2016.06.14
  • Published : 2016.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently computer-aided technology has been widely used in dentistry. DENTCA$^{TM}$ CAD/CAM denture system (DENTCA Inc.), one of CAD/CAM systems for fabricating complete denture, tries to collect and store all of a patient's information at the first visit. This system aims to deliver denture at the second visit through utilizing the CAD/CAM software to access the stored data for designing the 3D denture model. The 3 dimensional (3D) denture will then be fabricated with 3D printer. Many case reports have evaluated clinical application of CAD/CAM system for fabricating complete dentures. This case report is about fabricating of complete dentures using DENTCA system and conventional method in same patient. With two cases, usefulness and limitation of DENTCA system could be evaluated.

Computer-aided technology는 최근 치과 치료의 흐름이다. DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc.)는 상용화된 computer-aided design/computer-aided manufacturing (CAD/CAM) 의치 시스템 중 하나로, 한 번의 내원을 통해 의치 제작에 필요한 환자의 모든 정보를 획득하여, 이 정보를 컴퓨터에 저장하고 3D 프린팅을 통해 두 번째 내원 시에 의치 장착을 목표로 한다. 현재까지 여러 증례들은 총의치 제작에 대한 CAD/CAM system의 임상적 적용을 시험해 보았다. 본 증례는 두 명의 환자에서 DENTCA system을 이용한 의치와 전통적인 방법을 이용한 의치를 동시에 제작하여 DENTCA system의 효용성과 한계점을 고찰하였다.

Keywords

References

  1. Douglass CW, Shih A, Ostry L. Will there be a need for complete dentures in the United States in 2020? J Prosthet Dent 2002;87:5-8. https://doi.org/10.1067/mpr.2002.121203
  2. Zarb GA, Bolender CL. Prosthodontic treatment for edentulous patients. 12th ed. St. Louis; Mosby; 2004. p. 190-207.
  3. Bidra AS, Tylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. J Prosthet Dent 2013;109:361-6. https://doi.org/10.1016/S0022-3913(13)60318-2
  4. Murray MD, Darvell BW. The evolution of the complete denture base. Theories of complete denture retention-a riview. Part 1. Aust Dent J 1993;38:216-9. https://doi.org/10.1111/j.1834-7819.1993.tb03067.x
  5. Kanazawa M, Inokoshi M, Minakuchi S, Ohbayashi N. Trial of a CAD/CAM system for fabricating complete dentures. Dent Mater J 2011;30:93-6. https://doi.org/10.4012/dmj.2010-112
  6. Dankwort CW, Weidlich R, Guenther B, Blaurock JE. Engineer’s CAx education-it’s not only CAD. Computer-Aided Design 2004;36:1439-50. https://doi.org/10.1016/j.cad.2004.02.011
  7. Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013;41:407-16.
  8. Park JH, Cho IH, Shin SY, Choi YS. The treatment of an edentulous patient with DENTCATM CAD/CAM denture. J Korean Acad Prosthodont 2015;53:19-25. https://doi.org/10.4047/jkap.2015.53.1.19
  9. Jacobson TE, Krol AJ. A contemporary review of the factors involved in complete denture retention, stability, and support. Part I: retention. J Prosthet Dent 1983;49:5-15. https://doi.org/10.1016/0022-3913(83)90228-7

Cited by

  1. 3D Printing of Resin Material for Denture Artificial Teeth: Chipping and Indirect Tensile Fracture Resistance vol.11, pp.10, 2018, https://doi.org/10.3390/ma11101798
  2. 3D 프린팅용 광경화 수지를 사용하여 제작한 의치상용 인공치아의 항온수조 침적에 따른 변형률 비교 분석 vol.42, pp.3, 2020, https://doi.org/10.14347/jtd.2020.42.3.202