DOI QR코드

DOI QR Code

Human induced vibration vs. cable-stay footbridge deterioration

  • Casciati, S. (Department of Civil Engineering and Architecture, University of Catania)
  • 투고 : 2015.09.26
  • 심사 : 2016.05.26
  • 발행 : 2016.07.25

초록

In this paper, the possibility of using human induced loading (HIL) to detect a decrease of tension in the cable-stays of an existing footbridge is investigated. First, a reliable finite elements model of an existing footbridge is developed by calibration with experimental data. Next, estimates of the tension in the cables are derived and their dependency on the modal features of the deck is investigated. The modelling of the HIL is briefly discussed and used to perform the nonlinear, large strain, dynamic finite elements analyses. The results of these analyses are assessed with focus on characterizing the time histories of the tension in the cables under pedestrian crossing and their effects on the deck response for different initial conditions. Finally, the control perspective is introduced in view of further research.

키워드

참고문헌

  1. Bursi, O.S., Kumar, A., Abbiati, G. and Ceravolo, R. (2014), "Identification, model updating, and validation of a steel twin deck curved cable-stayed footbridge", Comput. - Aided Civil Infrastruct. Eng., 29(9), 703-722. https://doi.org/10.1111/mice.12076
  2. Cantieni, R. (2013), Cable-Stayed Footbridge: Investigation into Superstructure and Cable Dynamics. (Ed., A. Cunha), Topics in Dynamics of Bridges, Volume 3: Proceedings of the 31st IMAC, A Conference on Structural Dynamics, 2013, Conference Proceedings of the Society for Experimental Mechanics Series 38, DOI 10.1007/978-1-4614-6519-5_2, The Society for Experimental Mechanics Inc.
  3. Casciati, F., Casciati, S. and Faravelli, L. (2016), "A contribution to the modelling of human induced excitation on pedestrian bridges", submitted for publication.
  4. Casciati, F., Casciati, S., Elia, L. and Faravelli, L. (2016), "Optimal reduction from an initial sensor deployment along the deck of a cable-stayed bridge", Smart Struct. Syst., 17(3), 523-539. https://doi.org/10.12989/sss.2016.17.3.523
  5. Casciati, S., Casciati, F., Faravelli, L. and Bortoluzzi, D. (2014), "Modelling the human induced vibrations in a cable-stayed pedestrian timber bridge", Proceedings EWSHM2014, Nantes, 2014.
  6. Casciati, S., Faravelli, L. and Casciati, F. (2015), "HIL Excitation in the Damage Assessment of a Timber Footbridge", (Eds., F.K. Chang and F. Kopsaftopoulos), Structural Health Monitoring 2015: System Reliability for verification and implementation, 1-2, (IWSHM). Book Series: Structural Health Monitoring, 367-374.
  7. Cho, S., Lynch, J.P., Lee, J.J. and Yun, C.B. (2010), "Development of an automated wireless tension force estimation system for cable-stayed bridges", J. Intell. Mat. Syst. Str., 21(3), 361-376. https://doi.org/10.1177/1045389X09350719
  8. Humar, J.L. (000), Dynamics of structures, Prentice Hall, Upper Saddle River, NJ.
  9. Irvine, H.M. and Caughey, T.K. (1974), "The linear theory of free vibrations of a suspended cable", Proc. Roy. Soc. Lon. A. 341, 299-315 https://doi.org/10.1098/rspa.1974.0189
  10. Li, H., Zhang, F. and Jin, Y. (2014), "Real-time identification of time-varying tension in stay cables by monitoring cable transversal acceleration", Struct. Control Health Monit., 21, 1100-1111. https://doi.org/10.1002/stc.1634
  11. Li, M. and Ni, Y.Q. (2016), "Modal identifiability of a cable-stayed bridge using proper orthogonal decomposition", Smart Struct. Syst., 17(3), 413-429. https://doi.org/10.12989/sss.2016.17.3.413
  12. Liao, W., Ni, Y. and Zheng, G. (2012), "Tension force and structural parameter identification of bridge cables", Adv. Struct. Eng., 15(6), 983-996. https://doi.org/10.1260/1369-4332.15.6.983
  13. Mehrabi, A.B. and Tabatabai, H. (1998), "Unified finite difference formulation for free vibration of cables", J. Struct. Eng. -ASCE, 124, 1313-1322. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:11(1313)
  14. MSC (2004), http://www.mscsoftware.com
  15. Ni, Y.Q., Ko, J.M. and Zheng, G. (2002), "Dynamic analysis of large-diameter sagged cables taking in account flexural rigidity", J. Sound Vib., 257(2), 301-319. https://doi.org/10.1006/jsvi.2002.5060
  16. Ren, W.X., Liu, H.L. and Chen, G. (2008), "Determination of cable tensions based on frequency differences", Eng. Comput., 25(2), 172-189. https://doi.org/10.1108/02644400810855977
  17. Russell, J.C. and Lardner, T.J. (1998), "Experimental determination of frequencies and tension for elastic cables", J. Eng. Mech. - ASCE,124(10), 1067-1072. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:10(1067)
  18. Schiehlen, W. (2014), On the historical development of human walking dynamics, in: The History of Theoretical, Material and Computational Mechanics - Mathematics Meets Mechanics and Engineering, Part I - Pages 101-116, Springer, 2014, DOI 10.1007/978-3-642-39905-3_7
  19. Solari, G. and Piccardo, G. (2001), "Probabilistic 3-D turbulence modeling for gust buffeting of structures", Probab. Eng. Mech., 16(1), 73-86. https://doi.org/10.1016/S0266-8920(00)00010-2
  20. Triantafyllou, M.S. and Grinfogel, L. (1986), "Natural frequencies and modes of inclined cables", J. Struct. Div. - ASCE, 112(1), 139-148. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:1(139)
  21. Venuti, F. and Bruno, L. (2009), "Crowd-structure interaction in lively footbridges under synchronous lateral excitation: A literature review", Phys. Life Rev., 6, 176-206. https://doi.org/10.1016/j.plrev.2009.07.001
  22. Virlogeux, M. (2001), "Bridges with multiple cable-stayed spans", Struct. Eng. Int., 11, 61-82. https://doi.org/10.2749/101686601780324250
  23. Yang, Y., Li, S., Nagarajaiah, S., Li, H. and Zhou, P. (2016), "Real-time output-only identification of time-varying cable tension from accelerations via Complexity Pursuit", J. Struct. Eng. - ASCE, 142(1).
  24. Zivanovic, S., Pavic, A. and Reynolds, P. (2005), "Vibration serviceability of footbridges under human-induced excitation: a literature review", J. Sound Vib., 279, 1-74 https://doi.org/10.1016/j.jsv.2004.01.019
  25. Zui, H., Shinke, T. and Namita, Y.H. (1996), "Practical formulas for estimation of cable tension by vibration method", J. Struct. Eng. - ASCE, 122(6), 651-656. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:6(651)

피인용 문헌

  1. Cables interconnected with tuned inerter damper for vibration mitigation vol.151, 2017, https://doi.org/10.1016/j.engstruct.2017.08.009
  2. Natural Frequencies of a Very Large–Sag Extensible Cable vol.144, pp.2, 2018, https://doi.org/10.1061/(ASCE)EM.1943-7889.0001409
  3. Validation range for KF data fusion devices 2017, https://doi.org/10.1007/s00707-017-1994-1
  4. Motion-based design of TMD for vibrating footbridges under uncertainty conditions vol.21, pp.6, 2016, https://doi.org/10.12989/sss.2018.21.6.727
  5. Velocity feedback for controlling vertical vibrations of pedestrian-bridge crossing. Practical guidelines vol.22, pp.1, 2016, https://doi.org/10.12989/sss.2018.22.1.095
  6. Optimal Design and Application of a Multiple Tuned Mass Damper System for an In-Service Footbridge vol.11, pp.10, 2016, https://doi.org/10.3390/su11102801
  7. Exact Dynamic Analysis of Shallow Sagged Cable System - Theory and Experimental Verification vol.19, pp.12, 2016, https://doi.org/10.1142/s0219455419501530
  8. Full-Scale Experimental Study on Vibration Control of Bridge Suspenders Using the Stockbridge Damper vol.25, pp.8, 2016, https://doi.org/10.1061/(asce)be.1943-5592.0001591