References
- Joiner A. Tooth colour: a review of the literature. J Dent 2004;32:3-12.
- Dietschi D. Layering concepts in anterior composite restorations. J Adhes Dent 2001;3:71-80.
- Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996;75:18-32. https://doi.org/10.1016/S0022-3913(96)90413-8
- Spear F, Holloway J. Which all-ceramic system is optimal for anterior esthetics? J Am Dent Assoc 2008;139:19S-24S.
- Raptis NV, Michalakis KX, Hirayama H. Optical behavior of current ceramic systems. Int J Periodontics Restorative Dent 2006;26:31-41.
- Kingery WD, Bowen HK, Uhlmann DR. Introduction to ceramics. 2nd ed. New York; John Wiley and Sons; 1976. p. 646-89.
- Pecho OE, Ghinea R, Ionescu AM, Cardona JC, Della Bona A, Perez Mdel M. Optical behavior of dental zirconia and dentin analyzed by Kubelka-Munk theory. Dent Mater 2015;31:60-7. https://doi.org/10.1016/j.dental.2014.11.012
- Brodbelt RH, O'Brien WJ, Fan PL. Translucency of dental porcelains. J Dent Res 1980;59:70-5. https://doi.org/10.1177/00220345800590011101
- Clarke FJ. Measurement of color of human teeth. In: McLean JW, editor. Proceedings of the first international symposium on ceramics. Chicago; Quintessence; 1983. p. 441-90.
- Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002;88:4-9.
- Vagkopoulou T, Koutayas SO, Koidis P, Strub JR. Zirconia in dentistry: Part 1. Discovering the nature of an upcoming bioceramic. Eur J Esthet Dent 2009;4:130-51.
- Fernandez-Oliveras A, Pecho OE, Rubino M, Perez MM. Measurements of scattering anisotropy in dental tissue and zirconia ceramic. Proc SPIE 2012;8427:48.
- Harianawala HH, Kheur MG, Apte SK, Kale BB, Sethi TS, Kheur SM. Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials. J Adv Prosthodont 2014;6:456-61. https://doi.org/10.4047/jap.2014.6.6.456
- Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Effect of zirconia type on its bond strength with different veneer ceramics. J Prosthodont 2008;17:401-8. https://doi.org/10.1111/j.1532-849X.2008.00306.x
- Hjerppe J, Narhi T, Froberg K, Vallittu PK, Lassila LV. Effect of shading the zirconia framework on biaxial strength and surface microhardness. Acta Odontol Scand 2008;66:262-7. https://doi.org/10.1080/00016350802247123
- Pecho OE, Ghinea R, Ionescu AM, Cardona Jde L, Paravina RD, Perez Mdel M. Color and translucency of zirconia ceramics, human dentine and bovine dentine. J Dent 2012;40:e34-40. https://doi.org/10.1016/j.jdent.2012.08.018
- Aboushelib MN, de Jager N, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 2005;21:984-91. https://doi.org/10.1016/j.dental.2005.03.013
- Kim HK, Kim SH. Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia. Dent Mater 2014;30:e229-37. https://doi.org/10.1016/j.dental.2014.04.008
- Stawarczyk B, Emslander A, Roos M, Sener B, Noack F, Keul C. Zirconia ceramics, their contrast ratio and grain size depending on sintering parameters. Dent Mater J 2014;33:591-8. https://doi.org/10.4012/dmj.2014-056
- Zirkonzahn web site. Available from: http://www.zirkonzahn.com/en/prettau-zirconia/prettau-zirconia. Accessed 27 March, 2016.
- Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307. https://doi.org/10.1016/j.dental.2007.05.007
- Rhodes WH. Controlled transient solid second-phase sintering of yttria. J Am Ceram Soc 1981;64:13-9. https://doi.org/10.1111/j.1151-2916.1981.tb09551.x
- Ebeid K, Wille S, Hamdy A, Salah T, El-Etreby A, Kern M. Effect of changes in sintering parameters on monolithic translucent zirconia. Dent Mater 2014;30:e419-24. https://doi.org/10.1016/j.dental.2014.09.003
- Chevalier J, Deville S, Munch E, Jullian R, Lair F. Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis. Biomaterials 2004;25:5539-45. https://doi.org/10.1016/j.biomaterials.2004.01.002
- Ruiz L, Readey MJ. Effect of heat treatment on grain size, phase assemblage, and mechanical properties of 3 mol% Y-TZP. J Am Ceram Soc 1996;79:2331-40. https://doi.org/10.1111/j.1151-2916.1996.tb08980.x
- Scott HG. Phase relationships in the zirconia-yttria system. J Mater Sci 1975;10:1527-35. https://doi.org/10.1007/BF01031853
- Casolco SR, Xu J, Garay JE. Transparent/translucent polycrystalline nanostructured yttria stabilized zirconia with varying colors. Scr Mater 2008;58:516-9. https://doi.org/10.1016/j.scriptamat.2007.11.014
- Lee YK, Cha HS, Ahn JS. Layered color of all-ceramic core and veneer ceramics. J Prosthet Dent 2007;97:279-86. https://doi.org/10.1016/j.prosdent.2007.03.010
- O'Brien WJ, Johnston WM, Fanian F. Double-layer color effects in porcelain systems. J Dent Res 1985;64:940-3. https://doi.org/10.1177/00220345850640061801
- Stawarczyk B, Ozcan M, Hallmann L, Ender A, Mehl A, Hammerlet CH. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clin Oral Investig 2013;17:269-74. https://doi.org/10.1007/s00784-012-0692-6
- Jiang L, Liao Y, Wan Q, Li W. Effects of sintering temperature and particle size on the translucency of zirconium dioxide dental ceramic. J Mater Sci Mater Med 2011;22:2429-35. https://doi.org/10.1007/s10856-011-4438-9
- Tekeli S, Erdogan M. A quantitative assessment of cavities in 3 mol% yttria-stabilized tetragonal zirconia specimens containing various grain size. Ceram Int 2002;28:785-9. https://doi.org/10.1016/S0272-8842(02)00044-5
- Peelen JGJ, Metselaar R. Light scattering by pores in polycrystalline materials: Transmission properties of alumina. J Appl Phys 1974;45:216-20. https://doi.org/10.1063/1.1662961
- Zhang HB, Kim BN, Morita K, Yoshida H, Lim JH, Hiraga K. Optimization of high-pressure sintering of transparent zirconia with nano-sized grains. J Alloy Compd 2010;508:196-9. https://doi.org/10.1016/j.jallcom.2010.08.045
- Kim MJ, Ahn JS, Kim JH, Kim HY, Kim WC. Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency. J Adv Prosthodont 2013;5:161-6. https://doi.org/10.4047/jap.2013.5.2.161
- Anselmi-Tamburini U, Woolman JN, Munir ZA. Transparent nanometric cubic and tetragonal zirconia obtained by high-pressure Ppulsed electric current sintering. Adv Funct Mater 2007;17:3267-73. https://doi.org/10.1002/adfm.200600959
- Hayashi K, Kobayashi O, Toyoda S, Morinaga K. Transmission optical properties of polycrystalline alumina with submicron grains. Mater Trans JIM 1991;32:1024-9. https://doi.org/10.2320/matertrans1989.32.1024
- Apetz R, van Bruggen MPB. Transparent alumina: A light-scattering model. J Am Ceram Soc 2003;86:480-6. https://doi.org/10.1111/j.1151-2916.2003.tb03325.x
- Tuncel I, Eroglu E, Sari T, Usumez A. The effect of coloring liquids on the translucency of zirconia framework. J Adv Prosthodont 2013;5:448-51. https://doi.org/10.4047/jap.2013.5.4.448
- Prettau data sheet. Available from: http://www.zirkonzahn.com/assets/files/anleitungen-informationen-studien/INT-Data-sheet-Prettau-Zirconia.pdf. Accessed 22 July 2015.
- ICE Zirkon translucent data sheet. Available from: http://www.zirkonzahn.com/assets/files/anleitungen-informationen-studien/INT-Data-sheet-ICE-Zirkon-Translucent.pdf. Accessed: 22 July 2015.
- Antonson SA, Anusavice KJ. Contrast ratio of veneering and core ceramics as a function of thickness. Int J Prosthodont 2001;14:316-20.
- Wang F, Takahashi H, Iwasaki N. Translucency of dental ceramics with different thicknesses. J Prosthet Dent 2013;110:14-20. https://doi.org/10.1016/S0022-3913(13)60333-9
- Kurtulmus-Yilmaz S, Ulusoy M. Comparison of the translucency of shaded zirconia all-ceramic systems. J Adv Prosthodont 2014;6:415-22. https://doi.org/10.4047/jap.2014.6.5.415
- Spyropoulou PE, Giroux EC, Razzoog ME, Duff RE. Translucency of shaded zirconia core material. J Prosthet Dent 2011;105:304-7. https://doi.org/10.1016/S0022-3913(11)60056-5
- Liu MC, Aquilino SA, Lund PS, Vargas MA, Diaz-Arnold AM, Gratton DG, Qian F. Human perception of dental porcelain translucency correlated to spectrophotometric measurements. J Prosthodont 2010;19:187-93. https://doi.org/10.1111/j.1532-849X.2009.00542.x
Cited by
- Use of Digital Smile Design in esthetic restoration in anterior teeth: A case report vol.55, pp.2, 2017, https://doi.org/10.4047/jkap.2017.55.2.164
- Nanocrystalline Powders in ZrO2–Y2O3–CeO2–Al2O3–CoO System for Microstructural Design of ZrO2-Bazed Color Composites vol.56, pp.7-8, 2017, https://doi.org/10.1007/s11106-017-9910-8
- Color in Zirconia-Based Restorations and Related Factors: A Literature Review vol.27, pp.2, 2018, https://doi.org/10.1111/jopr.12740
- Mica glass ceramics for dental restorations pp.1753-5557, 2018, https://doi.org/10.1080/10667857.2018.1494240
- Optical properties of contemporary monolithic CAD-CAM restorative materials at different thicknesses pp.14964155, 2018, https://doi.org/10.1111/jerd.12382
- Color Aspect of Monolithic Zirconia Restorations: A Review of the Literature pp.1059941X, 2018, https://doi.org/10.1111/jopr.12906
- The color masking ability of a zirconia ceramic on the substrates with different values vol.11, pp.1, 2016, https://doi.org/10.15171/joddd.2017.002
- Effect of glazing and aging on optical properties of high-translucency zirconia vol.44, pp.4, 2016, https://doi.org/10.14815/kjdm.2017.44.4.319
- Effect of thickness of monolithic zirconia ceramic on final color vol.120, pp.2, 2016, https://doi.org/10.1016/j.prosdent.2017.10.007
- Comparison of translucency for different thicknesses of recent types of esthetic zirconia ceramics versus conventional ceramics … (in vitro study) vol.4, pp.2, 2018, https://doi.org/10.1016/j.fdj.2018.05.003
- 3M LavaTM Esthetic monolithic zirconia를 이용한 전치부 심미 수복 증례 vol.34, pp.4, 2018, https://doi.org/10.14368/jdras.2018.34.4.306
- Effects of veneering porcelain thickness and background shade on the shade match of zirconia-based restorations vol.13, pp.1, 2019, https://doi.org/10.15171/joddd.2019.011
- Monolithic Zirconia: An Update to Current Knowledge. Optical Properties, Wear, and Clinical Performance vol.7, pp.3, 2016, https://doi.org/10.3390/dj7030090
- High bonding strength between zirconia and composite resin based on combined surface treatment for dental restorations vol.18, pp.None, 2020, https://doi.org/10.1177/2280800020928655
- Influence of core color on final shade reproduction of zirconia crown in single central incisor situation – An in vivo study vol.12, pp.1, 2016, https://doi.org/10.4317/jced.56401
- Does the application of surface treatments in different sintering stages affect flexural strength and optical properties of zirconia? vol.32, pp.1, 2020, https://doi.org/10.1111/jerd.12552
- The effects of repetitive firing processes on the optical, thermal, and phase formation changes of zirconia vol.12, pp.1, 2020, https://doi.org/10.4047/jap.2020.12.1.9
- Translucency of Monolithic Zirconia after Hydrothermal Aging: A Review of In Vitro Studies vol.29, pp.6, 2016, https://doi.org/10.1111/jopr.13174
- A Digitally Driven Full Mouth Rehabilitation Protocol of a Patient with Hypoplastic Amelogenesis Imperfecta vol.9, pp.38, 2016, https://doi.org/10.14260/jemds/2020/622
- Effect of different cement systems and aging on the bond strength of chairside CAD-CAM ceramics vol.125, pp.2, 2016, https://doi.org/10.1016/j.prosdent.2019.11.025
- Microstructural changes and fracture resistance of nano-crystalline monolithic zirconia restorations upon aging vol.1046, pp.1, 2021, https://doi.org/10.1088/1757-899x/1046/1/012013
- Step-by-Step Esthetic Rehabilitation with Chairside System vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/5558158
- 3차원 Digital Smile Design을 활용한 전치부 심미수복 증례 vol.59, pp.4, 2016, https://doi.org/10.4047/jkap.2021.59.4.451
- Spectrophotometric study determining staining tendency in different restorative materials (longitudinal in vitro study) vol.33, pp.7, 2016, https://doi.org/10.1016/j.sdentj.2020.11.004