DOI QR코드

DOI QR Code

Performance-based remaining life assessment of reinforced concrete bridge girders

  • Anoop, M.B. (CSIR-Structural engineering research centre, CSIR Campus) ;
  • Rao, K. Balaji (CSIR-Structural engineering research centre, CSIR Campus) ;
  • Raghuprasad, B.K. (Department of civil engineering, Indian institute of science)
  • 투고 : 2015.09.04
  • 심사 : 2016.03.30
  • 발행 : 2016.07.25

초록

Performance-based remaining life assessment of reinforced concrete bridge girders, subject to chloride-induced corrosion of reinforcement, is addressed in this paper. Towards this, a methodology that takes into consideration the human judgmental aspects in expert decision making regarding condition state assessment is proposed. The condition of the bridge girder is specified by the assignment of a condition state from a set of predefined condition states, considering both serviceability- and ultimate- limit states, and, the performance of the bridge girder is described using performability measure. A non-homogeneous Markov chain is used for modelling the stochastic evolution of condition state of the bridge girder with time. The thinking process of the expert in condition state assessment is modelled within a probabilistic framework using Brunswikian theory and probabilistic mental models. The remaining life is determined as the time over which the performance of the girder is above the required performance level. The usefulness of the methodology is illustrated through the remaining life assessment of a reinforced concrete T-beam bridge girder.

키워드

참고문헌

  1. AASHTO (2003), Manual for condition evaluation and load and resistance factor rating (LRFR) of highway bridges, American Association of State Highway Officials, Washington, D.C.
  2. Aguirre, A.M. and Mejia de Gutierrez, R. (2013), "Durability of reinforced concrete exposed to aggressive conditions", Mater. Constr., 63(309), 7-38. https://doi.org/10.3989/mc.2013.00313
  3. Aktan, A.E., Farhey, D.N., Brown, D.L., Dalal, V., Helmicki, A.J., Hunt, V. and Shelley, S.J. (1996), "Condition assessment for bridge management", J. Infrastruct. Syst., 2(3), 108-117. https://doi.org/10.1061/(ASCE)1076-0342(1996)2:3(108)
  4. Ang, A.H.S. and Tang, W.H. (1984), Probability concepts in engineering planning and design, Volume II-Decision, Risk And Reliability, John Wiley & Sons, Inc., New York.
  5. Ahsana, P.V., Balaji Rao, K. and Anoop, M.B. (2015), "Stochastic analysis of flexural strength of RC beams subjected to chloride induced corrosion", Mater. Res., 18(6), 1224-1241. https://doi.org/10.1590/1516-1439.013215
  6. Anoop, M.B. (2009), "Remaining life assessment of reinforced concrete structural elements subjected to Chloride-induced corrosion of reinforcement", Ph. D. Thesis, Department of Civil Engineering, Indian Institute of Science, Bangalore.
  7. Anoop, M.B. and Balaji Rao, K. (2007), "Application of fuzzy sets for remaining life assessment of corrosion affected reinforced concrete bridge girders", J. Perform. Constr. Fac., 21(2), 166-171. https://doi.org/10.1061/(ASCE)0887-3828(2007)21:2(166)
  8. Anoop, M.B. and Balaji Rao, K. (2015), "Seismic damage estimation of reinforced concrete framed structures affected by chloride-induced corrosion", Earthq. Struct., 9(4), 851-873. https://doi.org/10.12989/eas.2015.9.4.851
  9. Anoop, M.B., Balaji Rao, K. and Appa Rao, T.V.S.R. (2002), "Application of fuzzy sets for estimating the service life of reinforced concrete structural members in corrosive environments", Eng. Struct., 24(9), 1229-1242. https://doi.org/10.1016/S0141-0296(02)00060-3
  10. Anoop, M.B., Balaji Rao, K. and Appa Rao, T.V.S.R. (2003), "A methodology for durability-based service life design of reinforced concrete flexural members", Mag. Concrete Res., 55(3), 289-303. https://doi.org/10.1680/macr.2003.55.3.289
  11. Anoop, M.B., Raghuprasad, B.K. and Balaji Rao, K. (2012), "A refined methodology for durability-based service life design of reinforced concrete structural elements considering fuzzy and random uncertainties", Comput.-Aid. Civil Infrastruct. Eng., 27(3), 170-186. https://doi.org/10.1111/j.1467-8667.2011.00730.x
  12. Aven, T. (2008), Risk Analysis: Assessing Uncertainties beyond Expected Values and Probabilities, John Wiley & Sons, West Sussex.
  13. Balaji Rao, K., Anoop, M.B. and Appa Rao, T.V.S.R. (2001), "A methodology for reliability-based design of concrete cover thickness with reference to chloride induced corrosion of reinforcement", Proceedings of International Conference on Civil Engineering, ICCE - 2001, Department of Civil Engineering, Indian Institute of Science, Bangalore, 2001, pp. 215-221.
  14. Balaji Rao, K. and Anoop, M.B. (2014), "Stochastic analysis of RC beams with corroded reinforcement", Proceedings of the Institution of Civil Engineers (UK)-Constr. Mater., 167(1), 26-35. https://doi.org/10.1680/coma.12.00010
  15. Balaji Rao, K., Anoop, M.B. and Appa Rao, T.V.S.R. (2002), "Reliability analysis of stochastic degrading and maintained systems", Proceedings of PSAM 6 (Probabilistic Safety Assessment and Management) Conference, San Juan, Puerto Rico, 23-28 June 2002.
  16. Balaji Rao, K., Anoop, M.B. and Lakshmanan, N. (2004a), "Modelling the evolutionary non-guassian processes using NHGMC", Proceedings of the International Congress on Computational Mechanics and Simulation (ICCMS-2004), Indian Institute of Technology, Kanpur,India, 9-12 December 2004, Vol. I. pp. 182-189.
  17. Balaji Rao, K., Anoop, M.B., Lakshmanan, N., Gopalakrishnan, S. and Appa Rao, T.V.S.R. (2004b), "Riskbased remaining life assessment of corrosion affected reinforced concrete structural members", J. Struct. Eng., 31(1), 51-64.
  18. Beaudry, M. (1978), "Performance related reliability for computer systems", Proceedings of the IEEE Transactions on Computers, 27, 540-547.
  19. BIS (2000), Indian Standard Code of Practice for Plain and Reinforced Concrete: IS 456-2000, Bureau of Indian Standards, New Delhi.
  20. Bolch, G., Greiner, S., de Meer, H. and Trivedi, K.S. (1998), Queuing networks and Markov Chains:modeling and performance evaluation with computer science applications, John Wiley & Sons Inc., New York.
  21. Brehmer, B. and Hagafors, R. (1986), "Use of experts in complex judgment decision making: A paradigm for the study of staff work", Organizational Behaviour and Human Decision Processes, 38, 181-195. https://doi.org/10.1016/0749-5978(86)90015-4
  22. Brunswik, E. (1952), "The conceptual framework of psychology", University of Chicago.
  23. Cho, H.C., Lee, D.H., Ju, H., Kim, K.S., Kim, K.H. and Monteiro, P.J.M. (2015), "Remaining service life estimation of reinforced concrete buildings based on fuzzy approach", Comput. Concrete, 15(6), 879-902. https://doi.org/10.12989/cac.2015.15.6.879
  24. Choi, H.H. and Seo, J. (2009), "Safety assessment using imprecise reliability for corrosion-damaged structures", Comput.-Aid. Civil Infrastruct. Eng., 24(4), 293-301. https://doi.org/10.1111/j.1467-8667.2009.00597.x
  25. Crank, J. (1975), Mathematics of Diffusion, Oxford University Press.
  26. Cusson, D., Lounis, Z. and Daigle, L. (2011), "Monitoring life cycle performance of aging concrete highway bridges built in corrosive environments", Comput.-Aid. Civil Infrastruct. Eng., 26(7), 524-541. https://doi.org/10.1111/j.1467-8667.2010.00710.x
  27. Freudenthal, A.M. (1954), "Safety and probability of structural failure", Transactions, 119, 1337-1375.
  28. Gao, H. and Zhang, X. (2013), "A markov-based road maintenance optimization model considering user costs", Comput.-Aid. Civil Infrastruct. Eng., 28, 451-464. https://doi.org/10.1111/mice.12009
  29. Gigerenzer, G., Hoffrage, U. and Kleinbolting, H. (1991), "Probabilistic mental models: a Brunswikian theory of confidence", Psycho. Rev., 98(4), 506-528. https://doi.org/10.1037/0033-295X.98.4.506
  30. Gjorv, O.E. (2013), "Durability design and quality assurance of major concrete infrastructure", Adv. Concrete Constr., 1(1), 45-63. https://doi.org/10.12989/acc.2013.1.1.045
  31. Kropp, J. and Hilsdorf, H.K. (1995), Criteria for concrete durability, E&FN Spon, London.
  32. Lay, S. and Schiessl, P. (2003), LIFECON Deliverable 3.2: Service Life Models, cbm-Technische Universitat Munchen.
  33. Marcous, G. (2006), "Performance prediction of bridge deck systems using Markov chains", J. Perform. Constr. Fac., 20(2), 146-155. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:2(146)
  34. Markeset, G. and Myrdal, R. (2008), Modelling of reinforcement corrosion in concrete - state of the art, COIN Project report 7. SINTEF Building and Infrastructure, Oslo.
  35. Minervino, C., Svakumar, B., Moses, F., Mertz, D. and Edberg, W. (2004), "New AASHTO guide manual for load and resistance factor rating of highway bridges", J. Bridge Eng., 9(1), 43-454. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:1(43)
  36. NYDoT (1997), Bridge inspection manual, New York State Department of Transportation.
  37. Papadakis, V.G. (2013), "Service life prediction of a reinforced concrete bridge exposed to chloride induced deterioration", Adv. Concrete Constr., 1(3), 201-213. https://doi.org/10.12989/acc2013.1.3.201
  38. Platis, A. (2006), "A generalized formulation for the performability indicator", Comput. Math. Appl., 51, 239-246. https://doi.org/10.1016/j.camwa.2005.11.009
  39. Platis, A., Limnios, N. and Du, M.L. (1998), "Dependability analysis of systems modeled by nonhomogeneous Markov chains", Reliab. Eng. Syst. Safety, 61, 235-249. https://doi.org/10.1016/S0951-8320(97)00073-2
  40. Prakash Desayi and Balaji Rao, K. (1987), "Probabilistic analysis of the cracking of RC beams", Mater. Struct., 20(120), 408-417. https://doi.org/10.1007/BF02472491
  41. Raupach, M., Warkus, J. and Gulikers, J. (2006), "Damage process due to corrosion of reinforcement barscurrent and future activities", Mater. Corros., 57(8), 648-653. https://doi.org/10.1002/maco.200603997
  42. Reid, S.G. (1999), "Perception and communication of risk and the importance of dependability", Struct. Safety, 21(4), 373-384. https://doi.org/10.1016/S0167-4730(99)00031-4
  43. Rodriguez, J., Ortega, L.M., Casal, J. and Diez, J.M. (1996), "Assessing structural conditions of concrete structures with corroded reinforcement", in R.K. Dhir and M.R. Jones Eds. Concrete Repair, Rehabilitation and Protection, E&FN Spon, London, pp. 65-78.
  44. Ryan, T.W., Hartle, R.A., Mann, J.E. and Danovich, L.J. (2006), "Bridge inspector's reference manual", Report No. FHWA NHI 03-001, Federal Highway Administration National Highway Institute, Virginia.
  45. Safehian, M. and Ramezanianpour, A.A. (2015), "Prediction of RC structure service life from field long term chloride diffusion", Comput. Concrete, 15(4), 589-606. https://doi.org/10.12989/cac.2015.15.4.589
  46. Sanders, W.H. and Meyer, J.F. (1991), "A unfied approach for specifying measures of performance, dependability ad performability", Dependable Computing for Critical Applications, Eds. A. Avizicuis and J. Lapric, Springer-Verlag, 515-237.
  47. Shafei, B., Alipour, A. and Shinozuka, M. (2013), "A stochastic computational framework to investigate the initial stage of corrosion in reinforced concrete superstructures", Comput.-Aid Civil Infrastruct. Eng., 28(7), 482-494. https://doi.org/10.1111/mice.12019
  48. Smith, R.M., Trivedi, K.S. and Ramesh, A.V. (1988), "Performability analysis: measures, an algorithm and a case study", Proceedings of the IEEE Transactions on Computers, 37(4), 406-417. https://doi.org/10.1109/12.2184
  49. USDoT (1995), "Recording and coding guide for the structure inventory and appraisal of the nation's bridges", Federal Highway Administration, Washington, D.C.
  50. Val, D.V. and Stewart, M.G. (2003), "Life-cycle cost analysis of reinforced concrete structures in marine environments", Struct. Safety, 25, 343-362. https://doi.org/10.1016/S0167-4730(03)00014-6
  51. Vidal, T., Castel, A. and Francois, R. (2004), "Analyzing crack width to predict corrosion in reinforced concrete", Cement Concrete Res., 34(1), 165-174. https://doi.org/10.1016/S0008-8846(03)00246-1
  52. Vorechovska, D., Chroma, M., Podrouzek, J., Rovnanikova, P. and Teply, B. (2009), "Modelling of chloride concentration effect on reinforcement corrosion", Comput.-Aid. Civil Infrastruct. Eng., 24(6), 446-458. https://doi.org/10.1111/j.1467-8667.2009.00602.x
  53. Vu, K.A.T. and Stewart, M.G. (2005), "Predicting the likelihood and extent of reinforced concrete corrosion-induced cracking", J. Struct. Eng., 131(11), 1681-1689. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1681)
  54. Wolf, B. (2000), "Processes of constructing judgments and actions by competent individuals with respect to object orientation: Programmatic ideas in the tradition of Brunswikian thoughts", Essay #7, The Brunswik Society.
  55. Wong, F.S. and Yao, J.T.P. (2001), "Health monitoring and structural reliability as a value chain", Comput.-Aid. Civil Infrastruct. Eng., 16(1), 71-78. https://doi.org/10.1111/0885-9507.00214
  56. Zhang, X. and Gao, H. (2010), "Optimal performance-based building facility management", Comput.-Aid. Civil Infrastruct. Eng., 25(4), 269-284. https://doi.org/10.1111/j.1467-8667.2009.00633.x

피인용 문헌

  1. System Reliability Evaluation of Prefabricated RC Hollow Slab Bridges Considering Hinge Joint Damage Based on Modified AHP vol.9, pp.22, 2016, https://doi.org/10.3390/app9224841