DOI QR코드

DOI QR Code

Seismic Response Analysis of Reinforced Concrete Wall Structure Using Macro Model

  • 투고 : 2016.01.10
  • 심사 : 2016.02.05
  • 발행 : 2016.03.30

초록

During earthquake, reinforced concrete walls show complicated post-yield behavior varying with shear span-to-depth ratio, re-bar detail, and loading condition. In the present study, a macro-model for the nonlinear analysis of multi-story wall structures was developed. To conveniently describe the coupled flexure-compression and shear responses, a reinforced concrete wall was idealized with longitudinal and diagonal uniaxial elements. Simplified cyclic material models were used to describe the cyclic behavior of concrete and re-bars. For verification, the proposed method was applied to various existing test specimens of isolated and coupled walls. The results showed that the predictions agreed well with the test results including the load-carrying capacity, deformation capacity, and failure mode. Further the proposed model was applied to an existing wall structure tested on a shaking table. Three-dimensional nonlinear time history analyses using the proposed model were performed for the test specimen. The time history responses of the proposed method agreed with the test results including the lateral displacements and base shear.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. American Society of Civil Engineers (ASCE). (2000). Prestandard and commentary for the seismic rehabilitation of buildings. Reston, VA: FEMA-356.
  2. American Society of Civil Engineers (ASCE). (2005). Improvement of nonlinear static seismic analysis Procedures. Reston, VA: FEMA-440.
  3. Applied Technology Council (ATC). (1996). Seismic evaluation and retrofit of concrete buildings. Rep. No. ATC-40, Redwood City, CA.
  4. Bentz, E. C., Vecchio, F. J., & Collins, M. P. (2006). Simplified modified compression field theory for calculating shear strength of reinforced concrete elements. ACI Structural Journal, 103(4), 614-624.
  5. Chang, G. A., & Mander, J. B. (1994). Seismic Energy Based Fatigue Damage Analysis of Bridge Columns: Part I-Evaluation of Seismic Capacity. Rep. No. NCEER-94-0006, State University of New York at Buffalo, New York, NY.
  6. Computer and Structures Inc. (2006). Nonlinear analysis and performance assessment for 3D structures, Berkeley, CA: Computer and Structures Inc.
  7. D'Ambrisi, A., & Filippou, F. C. (1999). Modeling of cyclic shear behavior in RC members. ASCE Journal of Structural Engineering, 125(10), 1143-1150. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:10(1143)
  8. Feenstra, P. H., & de Borst, R. (1993). Aspects of robust computational modeling for plain and reinforced concrete. Heron, 38(4), 5-26.
  9. Hsu, T. T. C., & Mo, Y. L. (1985). Softening of concrete in lowrise shear walls. ACI Structural Journal, 82(6), 883-889.
  10. Kabeyasawa, T., Shiohara, T., Otani, S., & Aoyama, H. (1982). Analysis of the full-scale seven story reinforced concrete test structure: Test PSD3. In 3rd JTCC, US.-Japan Cooperative Earthquake Research Program, BRI, Tsukuba, Japan.
  11. Lee, S. H., Hwang, S. J., Lee, K. B., Kang, C. B., Lee, S. H., & Oh, S. H. (2011). Earthquake simulation tests on a 1:5 scale 10-story R.C. residential building model. Earthquake Engineering Society of Korea, 15(6), 67-80. https://doi.org/10.5000/EESK.2011.15.6.067
  12. Lee, S. H., Oh, S. H., Hwang, W. T., Lee, K. B., & Lee, H. S. (2010). Static experiment for the seismic performance of a 2 story RC shear wall system. Earthquake Engineering Society of Korea, 14(6), 55-65. https://doi.org/10.5000/EESK.2010.14.6.055
  13. Linda, P., & Bachmann, H. (1994). Dynamic modeling and design of earthquake-resistant walls. Earthquake Engineering and Structural Dynamics, 23, 1331-1350. https://doi.org/10.1002/eqe.4290231205
  14. Mander, J. B., Priestley, M. J. N., & Park, R. (1988). Theoretical stress-strain model for confined concrete. ASCE Journal of Structural Engineering, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  15. Mansour, M. Y., & Hsu, T. T. C. (2005). Behavior of reinforced concrete elements under cyclic shear. II: Theoretical model. ASCE. Journal of Structural Engineering, 131(1), 54-65. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(54)
  16. Massone, L. M., Orakcal, K., & Wallace, J. W. (2009). Modeling of squat structural walls controlled by shear. ACI Structural Journal, 106(5), 646-655.
  17. Massone, L. M., & Wallace, J. W. (2009). RC wall shear-flexure interaction: Analytical and experimental responses. Los Angeles, CA: College of Engineering, University of California (UCLA-SGEL-2009/2).
  18. Menegotto, M., & Pinto, P. E. (1973). Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending. In IABSE symposium on the resistance and ultimate deformability of structures acted on by well-defined repeated loads, Lisbon.
  19. Monti, G., & Spacone, E. (2000). Reinforced concrete fiber beam column element with bond slip. ASCE Journal of Structural Engineering, 126(6), 654-661. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(654)
  20. Oesterle, R. G., Aristijabal-Ochoa, J. D., Shiu, K. N., & Corley, W. G. (1984). Web crushing of reinforced concrete structural walls. ACI Structural Journal, 81(3), 231-241.
  21. Okamura, H., & Maekawa, K. (1991). Nonlinear analysis and constitutive models of reinforced concrete. Tokyo, Japan: Gihodo-Shuppan.
  22. Orakcal, K. (2004). Nonlinear modeling and analysis of slender reinforced concrete walls. Dissertation, University of California, Los Angeles, CA.
  23. Orakcal, K., Massone, L. M., & Wallace, J. W. (2006). Analytical modeling of reinforced concrete walls for predicting flexural and coupled-shear-flexural responses. PEER Report 2006/07. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  24. Pacific Earthquake Engineering Research Center (PEER). (2001). Open system for earthquake engineering simulation. Berkeley, CA: University of California at Berkeley.
  25. Palermo, D., & Vecchio, F. J. (2007). Simulation of cyclically loaded concrete structures based on the finite-element method. ASCE Journal of Structural Engineering, 133(5), 728-738. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:5(728)
  26. Park, H., & Eom, T. (2007). Truss model for nonlinear analysis of RC members subject to cyclic loading. ASCE Journal of Structural Engineering, 133(10), 1351-1363. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1351)
  27. Park, H., & Klingner, R. E. (1997). Nonlinear analysis of RC members using plasticity with multiple failure criteria. ASEC Journal of Structural Engineering, 123(5), 643-651. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:5(643)
  28. Petrangeli, M., Pinto, P. E., & Ciampi, V. (1999). Fiber element for cyclic bending and shear of RC structures-I: Theory. ASCE Journal of Engineering Mechanics, 125(9), 994-1001. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:9(994)
  29. Prakash, V., Powell, G. H., & Campbell, S. (1993). DRAIN-2DX Base Program Description and User Guide-Version 1.10. Rep. No. UCB/SEMM-93/17, Proceedings, Structural Engineering Mechanics and Materials, University of California, Berkeley, CA.
  30. Salonikios, T. N., Kappos, A. J., Tegos, I. A., & Penelis, G. G. (1999). Cyclic load behavior of low-slenderness reinforced concrete walls: Design basis and test results. ACI Structural Journal, 96(4), 649-660.
  31. Salonikios, T. N., Kappos, A. J., Tegos, I. A., & Penelis, G. G. (2000). Cyclic load behavior of low-slenderness reinforced concrete walls: Failure modes, strength and deformation analysis, and design implications. ACI Structural Journal, 97(1), 132-142.
  32. Sittipunt, C., Wood, L. S., Lukkunaprasit, P., & Pattararattanakul, P. (2001). Cyclic behavior of reinforced concrete structural walls with diagonal web reinforcement. ACI Structural Journal, 98(4), 554-562.
  33. Stevens, N. J., Uzumeri, S. M., Collins, M. P., & Will, G. T. (1991). Reinforced concrete subjected to reversed cyclic shear-experiments and constitutive model. ACI Structural Journal, 88(2), 135-146.
  34. Thomsen, J. H., & Wallace, J. W. (2004). Displacement-based design of slender reinforced concrete structural walls-Experimental verification. ASCE Journal of Structural Engineering, 130(4), 618-630. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(618)
  35. Vecchino, F., & Collins, M. P. (1986). The modified compression field theory for reinforced concrete elements subject to shear. ACI Structural Journal, 83(2), 219-231.
  36. Vulcano, A., & Bertero, V. (1987). Analytical model for predicating the lateral response of RC shear walls: Evaluation of their reliability. Report No. UCB/EERC-87/19, USA.
  37. Wallace, J. W. (2012). Behavior, design, and modeling of structural walls and coupling beams-Lessons from recent laboratory tests and earthquakes. International Journal of Concrete Structures and Materials, 6(1), 3-18. https://doi.org/10.1007/s40069-012-0001-4
  38. Wong, P. S., & Vecchio, F. J. (2002). VecTor2 & Formworks User's Manuals. Toronto, Canada: Department of Civil Engineering, University of Toronto, Canada.
  39. Zhang, L. X., & Hsu, T. T. C. (1998). Behavior and analysis of 100 MPa concrete membrane elements. ASCE Journal of Structural Engineering, 124(1), 24-34. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:1(24)

피인용 문헌

  1. Mechanical Performance and Stress-Strain Relationships for Grouted Splices Under Tensile and Cyclic Loadings vol.10, pp.4, 2016, https://doi.org/10.1007/s40069-016-0156-5
  2. Experimental study of repaired RC columns subjected to uniaxial and biaxial horizontal loading and variable axial load with longitudinal reinforcement welded steel bars solutions vol.155, pp.None, 2016, https://doi.org/10.1016/j.engstruct.2017.11.043
  3. Integrating of Nonlinear Shear Models into Fiber Element for Modeling Seismic Behavior of Reinforced Concrete Coupling Beams, Wall Piers, and Overall Coupled Wall Systems vol.13, pp.1, 2019, https://doi.org/10.1186/s40069-019-0346-z
  4. A nonlinear quadrilateral thin flat layered shell element for the modeling of reinforced concrete wall structures vol.17, pp.12, 2016, https://doi.org/10.1007/s10518-019-00566-8