DOI QR코드

DOI QR Code

Numerical Analysis of Pressure Propagation to the Main Charge by Warhead Penetration into Concrete Targets

탄두의 콘크리트 표적관통 시 주장약에 전파되는 압력의 수치해석

  • Yun, Kyung Jae (The 4th Research and Development Institute, Agency for Defense Development) ;
  • Yoo, Yo-Han (The 4th Research and Development Institute, Agency for Defense Development)
  • 윤경재 (국방과학연구소 제4기술연구본부) ;
  • 유요한 (국방과학연구소 제4기술연구본부)
  • Received : 2015.06.25
  • Accepted : 2016.04.29
  • Published : 2016.06.05

Abstract

This paper is concerned with the numerical simulation result of pressure propagation to the main charge by warhead penetration into concrete targets. In this study, we developed on-line pressure measurement method in the main charge during warhead penetration. Using the on-line pressure measurement method, we successfully recorded the pressure-time history in the main charge during the field penetration test. Then we compared result of numerical simulations with test data and found that the simulation results are in good agreement with the test results. Finally, through the numerical calculations it is concluded that the installation of liner is effective in reducing pressure level produced in the main charge.

Keywords

References

  1. S. Lecume, P. Chabin and L. Minguet, "The SNPE Survivability Protocol," Presented at the IMEMTS, Bordeaux, October, 2001.
  2. J. S. Park, G. D. Lee and J. S. Chae, "Study of Measurement Method of Dynamic Material Properties for Functional High Explosive Formulation Simulant at Various Strain Rate," ADD Technical Report, ADDR-419-111578, 2011.
  3. J. S. Park, J. W. Lee, Y. S. Kim and H. G. Yeo, "A Study on Measurement of Transmitted Impact Stress Wave to the Main Charge," KIMST Annual Conference, 2012.
  4. K. J. Yun, Y. H. Yoo, J. S. Park and H. J. Kim, "Study on the Analysis of Transmitted Impact Stress Wave to the Main Charge," ADD Technical Report, ADDR-J416-120123, 2012.
  5. J. A. Zukas, et al., "Impact Dynamics," John Wiley & Sons, Inc, 1982.
  6. M. A. Meyers, "Dynamic Behavior of Materials," John Wiley & Sons, Inc, 1994.
  7. LS-DYNA User's & Theory Manual