DOI QR코드

DOI QR Code

Thermo mechanical analysis of a ceramic coated piston used in a diesel engine

  • Buyukkaya, Ekrem (Sakarya University, Department of Mechanical Engineering, Esentepe Campus) ;
  • Cerit, Muhammet (Sakarya University, Department of Mechanical Engineering, Esentepe Campus) ;
  • Coban, Mehmet (Sakarya University, Department of Mechanical Engineering, Esentepe Campus)
  • 투고 : 2015.02.23
  • 심사 : 2016.04.11
  • 발행 : 2016.06.10

초록

The aim of this paper is to determine temperature and stress distributions in a ceramic based on Partially Stabilized Zirconia coated steel piston crown by using plasma spraying for improving performance of a marine diesel engine. Effects of coating constituent and thickness on temperature and stress distributions were investigated including comparisons with results from an uncoated piston by means of finite element method namely ANSYS. Temperature developed at the coated surface is significantly higher than that of the uncoated piston. The maximum stress components occur between bond coat and adjacent ceramic layer. Provided that coating thickness is constant as 0.5 mm, when numbers of layers increase, magnitude of the normal stress decrease about 34.1% on the base metal surface according to uncoated piston, but the base metal surface temperature of the steel piston increase about 13.1%.

키워드

참고문헌

  1. Analysis User's Manual V14.0 (2012).
  2. Asgari, M. (2015), "Material distribution optimization of 2D heterogeneous cylinder under thermomechanical loading", Struct. Eng. Mech., Int. J., 53(4), 703-723. DOI: http://dx.doi.org/10.12989/sem.2015.53.4.703
  3. Aydin, S., Sayin, C. and Aydin, H. (2015), "Investigation of the usability of biodiesel obtained from residual frying oil in a diesel engine with thermal barrier coating", Appl. Therm. Eng., 80(4), 212-219. https://doi.org/10.1016/j.applthermaleng.2015.01.061
  4. Buyukkaya, E. (2008), "Thermal analysis of functionally graded coating Alsi alloy and steel pistons", Surf. Coat. Technol., 202(16), 3856-3865. https://doi.org/10.1016/j.surfcoat.2008.01.034
  5. Buyukkaya, E. and Cerit, M. (2007), "Thermal analysis of a ceramic coating diesel engine piston using 3D finite element method", Surf. Coat. Technol., 202(2), 398-402. https://doi.org/10.1016/j.surfcoat.2007.06.006
  6. Buyukkaya, E., Engin, T. and Cerit, M. (2006), "Effects of thermal barrier coating on gas emissions and performance of a LHR engine with different injection timings and valve adjustments", Energy Convers. Manage., 47(9-10), 1298-1310. https://doi.org/10.1016/j.enconman.2005.06.021
  7. Callister, W.D. (2007), Materials Science and Engineering, John Wiley & Sons.
  8. Cao, X.Q., Vassen, R. and Stoever, D. (2004), "Ceramic materials for thermal barrier coatings", J. Euro. Ceram. Soc., 24(1), 1-10. https://doi.org/10.1016/S0955-2219(03)00129-8
  9. Cerit, M. (2011), "Thermo mechanical analysis of a partially ceramic coated piston used in an SI engine", Surf. Coat. Technol., 205(11), 3499-3505. https://doi.org/10.1016/j.surfcoat.2010.12.019
  10. Cerit, M. and Coban, M. (2014), "Temperature and thermal stress analyses of a ceramic-coated aluminum alloy piston used in a diesel engine", Int. J. Therm. Sci., 77, 11-18. https://doi.org/10.1016/j.ijthermalsci.2013.10.009
  11. Chan, S.H. and Khor, K.A. (2000), "The effect of thermal barrier coated piston crown on engine characteristics", J. Mater. Eng. Perform., 9(1), 103-109. https://doi.org/10.1361/105994900770346358
  12. Eriksson, R., Yuan, K., Li, X.H. and Peng, R.L. (2015), "Corrosion of NiCoCrAlY coatings and TBC systems subjected to water vapor and sodium sulfate", J. Therm. Spray Technol., 24(6), 953-964. https://doi.org/10.1007/s11666-015-0253-z
  13. Esfahanian, V., Javaheri, A. and Ghaffarpour, M. (2006), "Thermal analysis of an SI engine piston using different combustion boundary condition treatments", Appl. Therm. Eng., 26(2-3), 277-287. https://doi.org/10.1016/j.applthermaleng.2005.05.002
  14. Gilbert, A., Kokiniand, K. and Sankarasubramanian, S. (2008), "Thermal fracture of zirconia-mullite composite thermal barrier coatings under thermal shock: A numerical study", Surf. Coat. Technol., 203(1-2), 91-98. https://doi.org/10.1016/j.surfcoat.2008.08.003
  15. Hejwowski, T. and Weronski, A. (2002), "The effect of thermal barrier coatings on diesel engine performance", Vacuum, 65(3-4), 427-432. https://doi.org/10.1016/S0042-207X(01)00452-3
  16. Hohenberg, G.F. (1979), Advanced Approaches for Heat Transfer Calculations, SAE Technical
  17. Jalaludina, H.A., Abdullahb, S., Ghazalib, M.J., Abdullahc, B. and Abdullahc, N.R. (2013), "Experimental study of ceramic coated piston crown for compressed natural gas direct injection engines", Procedia Eng., 68, 505-511. https://doi.org/10.1016/j.proeng.2013.12.213
  18. Keyvani, A. (2015), "Microstructural stability oxidation and hot corrosion resistance of nanostructured Al2O3/YSZ composite compared to conventional YSZ TBC coatings", J. Alloy. Compounds, 623, 229-237. DOI: http://dx.doi.org/10.1016/j.jallcom.2014.10.088
  19. Liu, X.B., Pang, M., Zhang, Z.G., Tan, J.S., Zhu, G.X. and Wang, M.D. (2012), "Numerical simulation of stress field for laser thermal loading on piston", Optics Laser Technol., 44(5), 1636-1640. https://doi.org/10.1016/j.optlastec.2011.12.045
  20. Lu, G.X., Hao, L.J., Liu, C. and Ye, F.X. (2014), "Thermal analysis and failure behaviour of YSZ thermal barrier coatings on low heat rejection diesel engine piston", Mater. Sci. Technol., 30(11), 1273-1281. DOI: http://dx.doi.org/10.1179/1743284714Y.0000000544
  21. Mohammed, M.T., Khan, Z.A., Geetha, M. and Siddiquee, A.N. (2014), "Micro-hardness and Young's modulus of a thermomechanically processed biomedical titanium alloy", Biomater. Biomech. Bioeng., 1(3), 117-130. DOI: http://dx.doi.org/10.12989/bme.2014.1.3.117
  22. Muchai, J.G., Kelkar, A.D., Klett, D.E. and Sankar, J. (2002), "Thermal-mechanical effects of ceramic thermal barrier coatings on diesel engine piston", Mater. Res. Soc. Symp. Proc., 697, 10-16.
  23. Ngo, V.M., Ibrahimbegovic, A. and Hajdo, A. (2014), "Nonlinear instability problems including localized plastic failure and large deformations for extreme thermo-mechanical loads", Coupled Syst. Mech., Int. J., 3(1), 89-110. DOI: http://dx.doi.org/10.12989/csm.2014.3.1.089
  24. Padture, N.P., Gell, M. and Jordan, E.H. (2002), "Thermal barrier coatings for gas-turbine engine applications", Sci. Compass, 296(5566), Paper No. 790825.
  25. Poerschke, D.L., Hass, D.D., Eustis,S., Seward, G.G.G., Sluytman, J.S.V. and Levi, C.G. (2015), "Stability and CMAS resistance of Ytterbium-Silicate/Hafnate EBCs/TBC for SiC composites", J. Am. Ceram. Soc., 98(1), 278-286. DOI: 10.1111/jace.13262
  26. Prasad, R. and Samria, N.K. (1990), "Heat transfer and stress fields in the inlet and exhaust valves of a semi-adiabatic diesel engine", Comput. Struct., 34(5), 765-777. https://doi.org/10.1016/0045-7949(90)90144-Q
  27. Sivakumar, G. and Kumar, S.S. (2014), "Investigation on effect of Yttria Stabilized Zirconia coated piston crown on performance and emission characteristics of a diesel engine", Alexandria Eng. J., 53(4), 787-794. https://doi.org/10.1016/j.aej.2014.08.003
  28. Su, L., Zhang, W., Chen, X. and Wang, T.J. (2015), "Experimental investigation of the biaxial strength of thermal barrier coating system", Ceram. Int., 41(7), 8945-8955. DOI: http://dx.doi.org/10.1016/j.ceramint.2015.03.168
  29. Tan, Y., Shyam, A., Choi, W.B., Lara-Curzio, E. and Sampath, S. (2010), "Anisotropic elastic properties of thermal spray coatings determined via resonant ultrasound spectroscopy", Acta Mater., 58(16), 5305-5315. https://doi.org/10.1016/j.actamat.2010.06.003
  30. Vedharaj, S., Vallinayagam, R., Yang, W.M., Chou, S.K., Chua, K.J.E. and Lee, P.S. (2014), "Experimental and finite element analysis of a coated diesel engine fueled by cashew nut shell liquid biodiesel", Experim. Therm. Fluid Sci., 53, 259-268. https://doi.org/10.1016/j.expthermflusci.2013.12.018
  31. Winkler, M.F. and Parker, D.W. (1993), "Ceramic thermal barrier coatings provide advanced diesel emissions control and improved management of combustion-exhaust system temperatures", SAE Technical Paper.
  32. Yonushonis, T.M. (1997), "Overview of thermal barrier coatings in diesel engines", J. Therm. Spray Technol., 6(1), 50-56. https://doi.org/10.1007/BF02646312