Journal of Computational Design and Engineering

  • 제3권1호
  • /
  • Pages.1-13
  • /
  • 2016
  • /
  • 2288-4300(pISSN)
  • /
  • 2288-5048(eISSN)
한국CDE학회 (Society for Computational Design and Engineering)
권호 표지
DOI QR코드

DOI QR Code

A novel approach to predict surface roughness in machining operations using fuzzy set theory

  • Tseng, Tzu-Liang (Bill) (Department of Industrial, Manufacturing and Systems Engineering The University of Texas at El Paso) ;
  • Konada, Udayvarun (Department of Industrial, Manufacturing and Systems Engineering The University of Texas at El Paso) ;
  • Kwon, Yongjin (James) (Department of Industrial Engineering, Ajou University)
  • 투고 : 2015.04.09
  • 심사 : 2015.04.27
  • 발행 : 2016.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The increase of consumer needs for quality metal cutting related products with more precise tolerances and better product surface roughness has driven the metal cutting industry to continuously improve quality control of metal cutting processes. In this paper, two different approaches are discussed. First, design of experiments (DOE) is used to determine the significant factors and then fuzzy logic approach is presented for the prediction of surface roughness. The data used for the training and checking the fuzzy logic performance is derived from the experiments conducted on a CNC milling machine. In order to obtain better surface roughness, the proper sets of cutting parameters are determined before the process takes place. The factors considered for DOE in the experiment were the depth of cut, feed rate per tooth, cutting speed, tool nose radius, the use of cutting fluid and the three components of the cutting force. Finally the significant factors were used as input factors for fuzzy logic mechanism and surface roughness is predicted with empirical formula developed. Test results show good agreement between the actual process output and the predicted surface roughness.

키워드

참고문헌

  1. Olivo CT. Advanced Machine Technology. North Scituate, MA: Breton Publishers; 1982.
  2. Coker SA, Oh SJ, Shin YC. In-process monitoring of surface roughness utilizing ultrasound. J. Manuf. Sci. Eng. 1998;120:197-200. https://doi.org/10.1115/1.2830101
  3. Mandara DeRoy Savage. Multi-level on-line Surface Roughness Recogni-tion System in End Milling Operation Ph.D. dissertation. Ames, IA, USA: Department of Industrial Education and Technology at Iowa State University; 1999.
  4. Hayajneh Mohammed T, Radaideh Saleh M. Modeling surface finish in end milling using fuzzy subtractive clustering-based system identification method. Mater. Manuf. Process. 2003;18(4)653-65. 2003. https://doi.org/10.1081/AMP-120022504
  5. Samhouri Murad S. A Neuro-Fuzzy Approach to the Prediction and Control of Surface Roughness during Grinding Ph.D. dissertation. Ontario, Canada: Department of Mechanical and Materials Engineering at Queen's University Kingston; 2005.
  6. Hoffmann, F. (2001), Evolutionary algorithms for fuzzy control system design, in: Proceedings of the IEEE Transaction, 89, No.9, September, pp. 1318-1333. https://doi.org/10.1109/5.949487
  7. Charles Elkan, (1994). The Paradoxical Success of Fuzzy Logic, University of California, San Diego, IEEE Expert.
  8. Yen J, Langari R. Fuzzy logic intelligence. Control and Information. Upper Saddle River, NJ: Prentice Hall Inc.; 1999.
  9. Scherman Micheal V. A Fuzzy Logic Approach for the Evaluation of Cosmetic Characteristics Master's thesis. Madison, WI, USA: Depart-ment of Manufacturing Systems Engineering at The University of Wisconsin-Madison; 1993.
  10. Zadeh LA. Fuzzy sets. Inf. Control 1965;8.
  11. Yen John. Fuzzy logic-a modern perspective. IEEE Trans. Knowl. Data Eng. 1999:153-65.
  12. Ross Timothy J. Fuzzy Logic with Engineering Applications. NJ, USA: John Wiley & Sons Inc.; 2004.
  13. Zadeh LA. The Concept of a linguistic variable and its application to approximate reasoning-I. Inf. Sci. 1975;8:199-249. https://doi.org/10.1016/0020-0255(75)90036-5
  14. Yen John, Wang Liang. Constructing optimal fuzzy models using statistical information criteria. Journal of Intelligent and Fuzzy Systems 1999;7(2)185-201.
  15. Self Kevin. Designing with fuzzy logic. IEEE Spectr. 1990;105:42-4.
  16. Del Carmen Lucero Yvonne. A Systematic Method for Automatic Generation of Membership Functions for Fuzzy Logic Applications Master's thesis. El Paso, TX, USA: Department of Electrical and Computer Engineering at The University of Texas at El Paso; 1999.
  17. Hommel A. Surface Roughness Terminology and Parameters. CT, USA: New Britain; 1988.
  18. Lou Shi-Jer. Development of Four in Process Surface Recognition Systems to Predict Surface Roughness in End Milling Ph.D. dissertation. Ames, IA, USA: Department of Industrial Education and Technology at Iowa State University; 1997.
  19. Alauddin M, El Baradie MA, Hashmi MSJ. Computer-aided analysis of a surface roughness model for end milling. J. Mater. Process. Technol. 1995;55:123-7. https://doi.org/10.1016/0924-0136(95)01795-X
  20. Montgomery D, Altintas Y. Mechanism of cutting forces and surface generation in dynamic milling. ASME J. Eng. Ind. 1991;113:16G168.
  21. Martelotti M. Analysis of the milling process. Trans. ASME 1945;63 (1941)667-700.
  22. Armarego EJA, Brown RH. The Machining of Metals. Englewood Cliffs, NJ: Prentice-Hall; 1967.
  23. Juneja BL, Sekhon GS. Fundamentals of Metal Cutting and Machine Tools. New Delhi, India: Wiley Eastern; 1987.
  24. Lou Mike S, Chen Joseph C, Li Caleb M. Surface Roughness Prediction Technique for CNC End-Milling. Journal of Industrial Technology 1998;15(1)2-6.
  25. Huynh VM, Fan Y. Surface-texture measurement and characterization with applications to machine-tool monitoring. Int. J. Adv. Manuf. Technol. 1992;7:2-10. https://doi.org/10.1007/BF02602945
  26. Boothroyd G, Knight WA. Fundamentals of Machining and Machine Tools, Second ed., New York: Marcel Dekker Inc.; 1989.
  27. Kwon Yongjin. Robust Control Of Surface Roughness in a Turning Operation Ph.D. dissertation. Iowa City, IA, USA: Department of Industrial Engineering at the University of Iowa; 2000.
  28. Dupinet E, Balazinski M, Czogala E. Tolerance allocation based on fuzzy logic and simulated annealing,. J. Intell. Manuf. 1996;7:487-97. https://doi.org/10.1007/BF00122838
  29. Shaw IM. Fuzzy Control of Industrial Systems. Norwell, MA: Kluwer Academic Publishers; 1998.
  30. Daniel R. Stashko,The fundamentals of milling aluminum, modern technologies applied to milling, SME Technical Report, June 12-L 3, 1985.

피인용 문헌

  1. AN EXAMINATION OF THE CONDITION OF WORKING SURFACES OF CRANKSHAFT CRANKPINS AND JOURNALS BASED ON THE MATERIAL FRACTION CURVES vol.265, pp.1, 2016, https://doi.org/10.5604/01.3001.0010.7586
  2. Sensor Data and Information Fusion to Construct Digital-twins Virtual Machine Tools for Cyber-physical Manufacturing vol.10, pp.None, 2016, https://doi.org/10.1016/j.promfg.2017.07.094
  3. Prediction Model of Cutting Parameters for Turning High Strength Steel Grade-H: Comparative Study of Regression Model versus ANFIS vol.2017, pp.None, 2017, https://doi.org/10.1155/2017/2759020
  4. Effects of Setting Errors (Insert Run-Outs) on Surface Roughness in Face Milling When Using Circular Inserts vol.6, pp.2, 2016, https://doi.org/10.3390/machines6020014
  5. Models for Prediction of Surface Roughness in a Face Milling Process Using Triangular Inserts vol.7, pp.1, 2016, https://doi.org/10.3390/lubricants7010009
  6. Multi-Response Optimization of Face Milling Performance Considering Tool Path Strategies in Machining of Al-2024 vol.12, pp.7, 2016, https://doi.org/10.3390/ma12071013
  7. EXPERIMENTAL ANALYSIS, STATISTICAL MODELING AND OPTIMIZATION OF EFFECTIVE PARAMETERS ON SURFACE QUALITY IN CORTICAL BONE MILLING PROCESS vol.20, pp.4, 2016, https://doi.org/10.1142/s0219519419500787
  8. Prediction of Surface Roughness Based on Cutting Parameters and Machining Vibration in End Milling Using Regression Method and Artificial Neural Network vol.10, pp.11, 2020, https://doi.org/10.3390/app10113941
  9. An improvement in fatigue behavior of AISI 4340 steel by shot peening and ultrasonic nanocrystal surface modification vol.791, pp.None, 2016, https://doi.org/10.1016/j.msea.2020.139752
  10. Using a Fuzzy Analytic Hierarchy Process to Formulate an Effectual Tea Assessment System vol.12, pp.15, 2016, https://doi.org/10.3390/su12156131
  11. The usefulness and application of fuzzy logic and fuzzy AHP in the materials finishing industry vol.98, pp.5, 2016, https://doi.org/10.1080/00202967.2020.1802082
  12. MAVSCOT: A fuzzy logic-based HIV diagnostic system with indigenous multi-lingual interfaces for rural Africa vol.15, pp.11, 2016, https://doi.org/10.1371/journal.pone.0241864
  13. Investigation on the Surface Quality Obtained during Trochoidal Milling of 6082 Aluminum Alloy vol.9, pp.4, 2016, https://doi.org/10.3390/machines9040075
  14. A Fuzzy Logic Model for the Analysis of Ultrasonic Vibration Assisted Turning and Conventional Turning of Ti-Based Alloy vol.14, pp.21, 2021, https://doi.org/10.3390/ma14216572