DOI QR코드

DOI QR Code

재해예방 기술지도의 문제점과 개선방안에 관한 연구 (건설 재해를 중심으로)

A Study on Problems and Improvement of Disaster Prevention Technology Guidance(Focused on construction disaster)

  • 노태우 (한국방재안전보건환경기술원(주)) ;
  • 강경식 (명지대학교 산업경영공학과)
  • Roh, Tae-Woo (Korea Advanced Institute of Environmental Health and Safety Disaster Ltd.) ;
  • Kang, Kyung-Sik (Department of Industrial Management Engineering, MYONGJI University)
  • 투고 : 2016.10.20
  • 심사 : 2016.12.15
  • 발행 : 2016.12.30

초록

Recently, industrial accidents rate has been gradually decreasing due to the development of safety management methods, but until now, the accident rate in the construction sector is higher than other industries. Large-scale construction sites are operating systematic safety systems to reduce industrial accidents. However, small and medium sized construction sites do not have systematic safety system and lack safety management ability, so that disaster is not reduced compared with large scale construction site. As a result, disaster prevention technology instruction system has been implemented to reduce the disasters of small and medium scale construction sites. However, in the case of a small construction site less than 2 billion won, there is little decrease in the accident rate, and in some cases, the accident rate increases. After the technical guidance system has been implemented, it is necessary to identify the performance and problems of implementation and to improve its effectiveness. In this study, we suggest the improvement plan to improve the efficiency of the technical guidance system by analyzing the problems and actual conditions of technical guidance operation in small and medium sized construction work sites.

키워드

참고문헌

  1. Park Jun Ho, (2004), "A Study on effectiveness of technical consulting system for accident prevention in construction work", Department of Industrial Safety Engineering Graduate School of Chosun Unimersity.
  2. Heui-Keun Oh. (2016), "The Problem Analysis and Improvement of Technical Guidance On Comstruction Accident Prevention", Korea Saf, Manag. Sci, 18(2): 19-27. https://doi.org/10.12812/ksms.2016.18.2.19
  3. Korea Occupational Safety Health Agency, (1999), "(A)Study on the effect and appropriate of safety consulting for preventing construction calamity".
  4. Gyeong Bo Han, Jae Hwan Cho. (2016),"A Study on the Analysis of System Improvement in Construction Accident Prevention through Technical Guidance on Data Analysis Results Report", Korea Saf, Manag. Sci, 18(2):29-36. https://doi.org/10.12812/ksms.2016.18.2.29
  5. Park Dae-Sung, (2006), "The lmprovement of the Effectiveness of the Safety Management System for Construction Calamity Prevention", Journal of the Korean Construction Safety Engineers Association, 35:60-71.
  6. Jun-Seo Ji. (2016), "Disaster Prevention Research Reasonable Safety Through Education ", Korea Saf, Manag. Sci, 18(2):9-17.
  7. "Industrial Accident Analysis", (2014), Korea Ministry of Empoyment and Labor, 58-59.
  8. "Occupational Health and Safety Act", Korea Ministry of Government Legislation, http://www.moleg.go.kr
  9. "Construction Technology Promotion Act", Korea Ministry of Government Legislation, http://www.moleg.go.kr