References
- Jeong, T., Sun, J., Kim, S. and Noh, Y., 2014, "Analysis of the Cooling Performance and Characteristic Using Lithium-ion Battery for Eco-friendly Vehicle," KSAE sector General Conference 2014, pp. 1192-11929.
- Kwon, M. S., 2007, "Development Status and Trends of Environmental Friendly Vehicles," KSAE HEV and FCEV Workshop, pp. 1-11.
- Oh, H. and Park, S., 2014, "Effect of Coolant Flow Characteristics in Cooling Plates on the Performance of HEV/EV Battery Cooling Systems," Transactions of KSAE, Vol. 22, No. 3, pp.179-185. https://doi.org/10.7467/KSAE.2014.22.3.179
- Park, J. and Lee, K., 2009, "The Safety of Lithium Ion Polymer Battery System for Hybrid Electric Vehicle," Auto Journal KSAE, Vol. 31, No. 1, pp. 44-48.
- Jarrett, A. and Kim, I. Y., 2011, "Design Optimization of Electric Vehicle Battery Cooling Plates for Thermal Performance," Journal of Power Sources, Vol. 196, No. 23, pp. 10359-10368 https://doi.org/10.1016/j.jpowsour.2011.06.090
- Mahamud, R. and Park, C., 2011, "Reciprocationg Air Flow for Li-ion Battery Thermal Management to Improve Temperature Uniformity," Journal of Power Source, Vol. 196, pp. 5685-5696. https://doi.org/10.1016/j.jpowsour.2011.02.076
- Tong, W., Somasundaram, K., Birgersson, E., Munjumdar, A. S. and Christopher, Y., 2015, "Numerical Investigation of Water Cooling for a Lithium-ion Bipolar Battery Pack," International Journal of Thermal Science, Vol. 94, pp. 259-269. https://doi.org/10.1016/j.ijthermalsci.2015.03.005
- Yuksel, T. and Michal, J., 2012, "Development of a Simulation Model to Analyze the Effect of Thermal Management on Battery Life," SAE Technical Paper, No. 2012-01-0671.
- Teng, H., Ma, Y., Yeow, K. and Thelliez, M., 2011, "An Analysis of a Lithium-ion Battery System with Indirect Air Cooling and Warm-Up," SAE Int. J. Passeng. Cars-Mech. Syst., Vol. 4, Issue 3, pp. 1343-1357. https://doi.org/10.4271/2011-01-2249
- Javani, N., Dincer, I., Naterer, G. F. and Rohrauer, G. L., 2014, "Modeling of Passive Thermal Management for Electric Vehicle Battery Packs with PCM Between Cells," Applied Thermal Engineering, Vol. 73, issue 1, pp. 307-316 https://doi.org/10.1016/j.applthermaleng.2014.07.037
- Park, H., 2013, "A Design of Air Flow Configuration for Cooling Lithium Ion Battery in Hybrid Electric Vehicles," Journal of Power Sources, Vol. 239, pp. 30-36. https://doi.org/10.1016/j.jpowsour.2013.03.102
- Sonage, B. K. and Mohanan, P., 2015, "Miniaturization of Automobile Radiator by Using Zinc-water and Zinc Oxide-water Nanofluid," J. Mechanical Science and Technology, Vol. 29, pp. 2177-2185. https://doi.org/10.1007/s12206-015-0438-x
- Kim, G. H. and PESARAN, A. A., 2015, "Battery Thermal Management Design Modeling," 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Conference and Exhibition, Yokohama, Japan.
- Yu, S. H., Sohn, S., Nam, J. H. and Kim, C. J., 2009, "Numerical Study to Examine the Performance of Multi-pass Serpentine Flow-fields for Cooling Plates in Polymer Electrolyte Membrane Fuel Cells," J. Power Sources, Vol.194, pp. 697-703. https://doi.org/10.1016/j.jpowsour.2009.06.025
- Murashko, K. A., Mityakov, A. V., Pyrhonen, J., Mityakov, V. Y. and Sapozhnikov, S. S., 2014, "Thermal Parameters Determination of Battery Cells by Local Heat Flux Measurements," J. Power Sources, Vol. 271, pp. 48-54. https://doi.org/10.1016/j.jpowsour.2014.07.117
- Ryu, T., Lee, E. and Choi, J., 1999, "Comparison of Ngine and Vehicle Cooling Performances with Ethylene Glycol Coolant and Prophylene Glycol Coolant," Journal of KSAE, Vol. 7, pp. 193-201.
- Lee, J. H. and Yoo, D. W., 2014, "A Study on the Stress and Endurance Life Depending on the Load and Temperatures for Automobile spindle," Trans. Korean Soc. Mech. Eng. B, pp. 329-330.
- Rezania, A., Rosendahl, L. A. and Andreasen, S. J., 2012, "Experimental Investigation of Thermoelectric Power Generation Versus Coolant Pumping Power in a Microchannel Heat Sink," International Communications in Heat and Mass Transfer, Vol. 39, issue 8, pp. 1054-1058. https://doi.org/10.1016/j.icheatmasstransfer.2012.07.010
- Li, J. and Mazzola, M. S., 2013, "Accurate Battery Pack Modeling for Automotive Applications," J. Power Sources, Vol. 237, pp. 215-228. https://doi.org/10.1016/j.jpowsour.2013.03.009
- Choi, J. Y., Park, S. Y., Sung, S. Y., Hahn, C. and Ha, B., 2013, "Analysis of Teardown Benchmark About Nissan Leaf Electric Vehicle," KSAE Sector General Conference, pp. 1746-1746.