DOI QR코드

DOI QR Code

Multicracks identification in beams based on moving harmonic excitation

  • Chouiyakh, Hajar (Mathematical Modeling and Control, Faculty of Sciences and Techniques of Tangier, Abdelmalek Essaadi University) ;
  • Azrar, Lahcen (Mathematical Modeling and Control, Faculty of Sciences and Techniques of Tangier, Abdelmalek Essaadi University) ;
  • Alnefaie, Khaled (Department of Mechanical Engineering, Faculty of Engineering, King Abdulaziz University) ;
  • Akourri, Omar (Mathematical Modeling and Control, Faculty of Sciences and Techniques of Tangier, Abdelmalek Essaadi University)
  • Received : 2015.03.28
  • Accepted : 2016.04.06
  • Published : 2016.06.25

Abstract

A method of damage detection based on the moving harmonic excitation and continuous wavelet transforms is presented. The applied excitation is used as a moving actuator and its frequency and speed parameters can be adjusted for an amplified response. The continuous wavelet transforms, CWT, is used for cracks detection based on the resulting amplified signal. It is demonstrated that this identification procedure is largely better than the classical ones based on eigenfrequencies or on the eigenmodes wavelet transformed. For vibration responses, free and forced vibration analyses of multi-cracked beams are investigated based on both analytical and numerical methodological approaches. Cracks are modeled through rotational springs whose compliances are evaluated using linear elastic fracture mechanics. Based on the obtained forced responses, multi-cracks positions are accurately identified and the CWT identification can be highly improved by adjusting the frequency and the speed excitation parameters.

Keywords

Acknowledgement

Supported by : King Abdulaziz University

References

  1. Abolbashari, M.H., Nazari, F. and Rad, J.S. (2014), "A multi-crack effects analysis and crack identification in functionally graded beams using particle swarm optimization algorithm and artificial neural network", Struct. Eng. Mech., 51(2), 299-313 https://doi.org/10.12989/sem.2014.51.2.299
  2. Al-Waily, M. (2013), "Theoretical and numerical vibration study of continuous beam with crack size and location effect", Int. J. Innov. Res. Sci. Eng. Tech., 2(9), 4166-4177.
  3. Andreaus, U., Casini, P. and Vestroni, F. (2007), "Non-linear dynamics of a cracked cantilever beam under harmonic excitation", Int. J. Nonlin. Mech., 42(3), 566-575. https://doi.org/10.1016/j.ijnonlinmec.2006.08.007
  4. Behzad, M., Ebrahimi, A. and Meghdari, A. (2010), "A continuous vibration theory for beams with a vertical edge crack", Scientia Iranica, 17(3), 194-204.
  5. Christides, S. and Barr, A. (1984), "One dimensional theory of cracked Bernoulli-Euler beams", Int. J. Mech. Sci., 26(11-12), 639-648. https://doi.org/10.1016/0020-7403(84)90017-1
  6. Dimarogonas, A.D. (1996), "Vibration of cracked structures: a state of the art review", Eng. Fract. Mech., 55(5), 831-857. https://doi.org/10.1016/0013-7944(94)00175-8
  7. Doebling, S., Farrar, C., Prime, M. and Shevitz, D. (1996), "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review", Los Alamos National Laboratory Report.
  8. Friswell, M. and Penny, J. (2002), "Crack modeling for structural health monitoring", Struct. Hlth. Monit., 1(2), 139-148. https://doi.org/10.1177/1475921702001002002
  9. Khorram, A., Bakhtiari-Nejad, F. and Rezaein, M. (2012), "Comparison studies between two wavelet based cracked detection methods of a beam subjected to a moving load", Int. J. Eng. Sci., 51, 204-215. https://doi.org/10.1016/j.ijengsci.2011.10.001
  10. Khorram, A., Rezaien, M. and Bakhtiari-Nejad, F. (2013), "Multiple cracks detection in a beam subjected to a moving load using wavelet analysis with factorial design", Eur. J. Mech. A/Solid., 40, 97-113. https://doi.org/10.1016/j.euromechsol.2012.12.012
  11. Li, Q.S. (2002), "Free vibration analysis of non uniform beams with an arbitrary number of cracks and concentrated masses", J. Sound Vib., 252(3), 509-525. https://doi.org/10.1006/jsvi.2001.4034
  12. Loutridis, S., Douka, E. and Trochidis, A. (2004), "Crack identification in double-cracked beams using wavelet analysis", J. Sound Vib., 277(4), 1025-1039. https://doi.org/10.1016/j.jsv.2003.09.035
  13. Nassar, M., Matbuly, M.S. and Ragb, O. (2012), "Vibration analysis of structural elements using differential quadrature method", J. Adv. Res., 4, 93-102.
  14. Orhan, S. (2007), "Analysis of free and forced vibration of a cracked cantilever beam", NDT&E Int., 40, 443-450. https://doi.org/10.1016/j.ndteint.2007.01.010
  15. Ovanesova, A. and Suarez, L. (2004), "Applications of wavelet transforms to damage detection in frame structures", Eng. Struct., 26, 39-49. https://doi.org/10.1016/j.engstruct.2003.08.009
  16. Papadopoulos, C.A. (2008), "The strain energy release approach for modeling cracks in rotors: a state of the art review", Mech. Syst. Signal Pr., 22, 763-789. https://doi.org/10.1016/j.ymssp.2007.11.009
  17. Ramon, S., Luciano, M. and Brito, M. (2012), "Determination of damages in beams using wavelet transforms", Proceedings of the World Congress on Engineering, 1211-1213.
  18. Salawu, O. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/S0141-0296(96)00149-6
  19. Shifrin, E. and Ruotolo, R. (1999), "Natural frequencies of a beam with an arbitrary number of cracks", J. Sound Vib., 222(3), 409-423. https://doi.org/10.1006/jsvi.1998.2083
  20. Tada, H., Paris, P.C. and R.Irwin, G. (2000), The Stress Analysis of Cracks Handbook, ASME Press, New York.
  21. Torabi, K., Afshari, H. and Haji Aboutalebi, F. (2014), "A DQEM for transverse vibration analysis of multiple cracked non-uniform Timoshenko beams with general boundary conditions", Comput. Math. Appl., 67(3), 527-541. https://doi.org/10.1016/j.camwa.2013.11.010
  22. Vosoughi, A.R. (2015), "A developed hybrid method for crack identification of beams", Smart Struct. Syst., 16(3), 401-414. https://doi.org/10.12989/sss.2015.16.3.401
  23. Zhi, Z. and Yingyan, Z. (2008), Advanced Differential Quadrature Methods, CRC Press.
  24. Zhu, X. and Law, S. (2006), "Wavelet-based crack identification of bridge beam from operational deflection time history", Int. J. Solid. Struct., 43, 2299-2317. https://doi.org/10.1016/j.ijsolstr.2005.07.024

Cited by

  1. Vibration and multi-crack identification of Timoshenko beams under moving mass using the differential quadrature method vol.120, 2017, https://doi.org/10.1016/j.ijmecsci.2016.11.014
  2. Multi-cracks identification based on the nonlinear vibration response of beams subjected to moving harmonic load vol.83, 2016, https://doi.org/10.1051/matecconf/20168306003
  3. Crack identification based on the nonlinear response of plates with variably oriented surface crack. vol.149, pp.2261-236X, 2018, https://doi.org/10.1051/matecconf/201714902061
  4. Crack identification based on the nonlinear response of plates with variably oriented surface crack. vol.149, pp.2261-236X, 2018, https://doi.org/10.1051/matecconf/201814902061
  5. Comparisons of wavelets and contourlets for vibration-based damage identification in the plate structures pp.2048-4011, 2019, https://doi.org/10.1177/1369433218824903