한국정보전자통신기술학회논문지 (The Journal of Korea Institute of Information, Electronics, and Communication Technology)

  • 제9권2호
  • /
  • Pages.171-177
  • /
  • 2016
  • /
  • 2005-081X(pISSN)
  • /
  • 2288-9302(eISSN)
한국정보전자통신기술학회 (Korea Information Electronic Communication Technology)
권호 표지
DOI QR코드

DOI QR Code

Lomax 분포의 형상모수에 근거한 소프트웨어 신뢰성 비용모형에 관한 연구

A Software Reliability Cost Model Based on the Shape Parameter of Lomax Distribution

  • Yang, Tae-Jin (Industry-Academic Cooperation Foundation, Namseoul University)
  • 투고 : 2016.04.14
  • 심사 : 2016.04.26
  • 발행 : 2016.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

소프트웨어 개발과정에서 소프트웨어 신뢰성은 매우 중요한 이슈이다. 소프트웨어 고장분석을 위한 무한고장 비동질적인 포아송과정에서 고장발생률이 상수이거나, 단조 증가 또는 단조 감소하는 패턴을 가질 수 있다. 본 연구에서는 소프트웨어 제품 테스팅 과정에서 고장 수명분포의 형상모수를 고려한 소프트웨어 신뢰성 비용 모형에 대하여 연구 하였다. 소프트웨어 신뢰성 분야에서 많이 사용되는 Lomax-NHPP 신뢰 성장 모형에 대한 비용 비교 문제를 제시하였다. 소프트웨어 고장모형은 무한고장 비동질적인 포아송과정을 이용하고 모수추정법은 최우추정법을 이용 하였다. 따라서 본 논문에서는 형상모수를 고려한 소프트웨어 비용모형 분석을 위하여 소프트웨어 고장시간 자료를 적용하여 비교 분석하였다. 대용량 소프트웨어가 수정과 변경하는 과정에서 결함의 발생을 거의 피할 수 없는 상황이 현실이다. 신뢰성 요구를 만족하고 총비용을 최소화하는 상황이 최적방출시간이다. 경우에 따라서는 왜도와 첨도 측면에서 효율적인 카파분포, 지수화지수분포 등 업데이트된 분포에 대한 방출 시기 문제를 비교 분석하는 연구도 가치 있는 일이라 판단된다. 이 연구를 통하여 소프트웨어 개발자들은 최적방출시간과 경제적 개발 비용을 파악 하는데 도움을 줄 수 있으리라 사료 된다.

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this study, reliability software cost model considering shape parameter based on life distribution from the process of software product testing was studied. The cost comparison problem of the Lomax distribution reliability growth model that is widely used in the field of reliability presented. The software failure model was used the infinite failure non-homogeneous Poisson process model. The parameters estimation using maximum likelihood estimation was conducted. For analysis of software cost model considering shape parameter. In the process of change and large software fix this situation can scarcely avoid the occurrence of defects is reality. The conditions that meet the reliability requirements and to minimize the total cost of the optimal release time. Studies comparing emissions when analyzing the problem to help kurtosis So why Kappa efficient distribution, exponential distribution, etc. updated in terms of the case is considered as also worthwhile. In this research, software developers to identify software development cost some extent be able to help is considered.

키워드

참고문헌

  1. Gokhale, S. S. and Trivedi, K. S. A, "time/structure based software reliability model", Annals of Software Engineering. 8, pp. 85-121. 1999. https://doi.org/10.1023/A:1018923329647
  2. Goel A L, Okumoto K, "Time-dependent fault detection rate model for software and other performance measures", IEEE Trans. Reliab. 28, pp.206-11, 1978.
  3. Yamada S, Ohba H, "S-shaped software reliability modeling for software error detection", IEEE Trans. Reliab, 32, pp.475-484, 1983.
  4. Zhao M, "Change-point problems in software and hardware reliability", Commun. Stat. Theory Methods, 22(3), pp.757-768, 1993. https://doi.org/10.1080/03610929308831053
  5. Shyur H-J, "A stochastic software reliability model with imperfect debugging and change-point", J. Syst. Software 66, pp.135-141, 2003. https://doi.org/10.1016/S0164-1212(02)00071-7
  6. Pham H, Zhang X., "NHPP software reliability and cost models with testing coverage", Eur. J. Oper. Res, 145, pp.445-454, 2003.
  7. Huang C-Y, "Performance analysis of software reliability growth models with testing-effort and change-point", J. Syst. Software 76, pp. 181-194, 2005. https://doi.org/10.1016/j.jss.2004.04.024
  8. Kuei-Chen, C., Yeu-Shiang, H., and Tzai-Zang, L., "A study of software reliability growth from the perspective of learning effects", Reliability Engineering and System Safety 93, pp. 1410-1421, 2008. https://doi.org/10.1016/j.ress.2007.11.004
  9. Hee-Cheul KIM, "The Assessing Comparative Study for Statistical Process Control of Software Reliability Model Based on Rayleigh and Burr Type", Journal of korea society of digital industry and information management, Volume 10, No.2, pp. 1-11. 2014. https://doi.org/10.17662/ksdim.2014.10.1.001
  10. Tae-Hyun Yoo, "The Infinite NHPP Software Reliability Model based on Monotonic Intensity Function", Indian Journal of Science and Technology, Volume 8, No. 14, pp. 1-7, 2015.
  11. Zhang Y, Wu K. Software cost model considering reliability and time of software in use. Journal of Convergence Information Technology. 7(13), pp. 135-42, 2012.
  12. Kim H-C. The Property of Learning effect based on Delayed Software S-Shaped Reliability Model using Finite NHPP Software Cost Model, Indian Journal of Science and Technology 8(34), pp. 1-7, 2015.
  13. http://www.math.wm.edu/-leemis/chart/UDR/PDFs/Lomax.pdf
  14. Satya Prasad R, Sridevi G, Kumari KS. Assessing Pareto Type II Software Reliability using SPC. International Journal of Computer Applications (0975-8887),62(3), pp.17-21, 2013. https://doi.org/10.5120/10060-4652
  15. Y. HAYAKAWA and G. TELFAR, "Mixed Poisson-Type Processes with Application in Software Reliability", Mathematical and Computer Modelling, 31, pp. 151156, 2000.
  16. K. Kanoun and J. C. Laprie, "Handbook of Software Reliability Engineering", M.R.Lyu, Editor, chapter Trend Analysis. McGraw-Hill New York, NY, pp. 401-437, 1996.
  17. Tae-Jin Yang, Jea-gun Park, "A Study on Software Reliability Model based on Mixture Weibull NHPP Property", International Journal of Applied Engineering Research Vol.10, No.90, pp. 548-552, 2015.