한국주조공학회지 (Journal of Korea Foundry Society)

  • 제36권2호
  • /
  • Pages.67-74
  • /
  • 2016
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지
DOI QR코드

DOI QR Code

AC2BS합금의 열간 균열강도 및 인장특성에 미치는 스크랩 함량의 영향

Effect of Scrap Content on the Hot Tearing Property and Tensile Property of AC2BS Alloy

  • 권용호 (부경대학교 대학원 금속공학과) ;
  • 김헌주 (부경대학교 공과대학 금속공학과)
  • Kwon, Yong-Ho (Department of Metallurgical Engineering, Graduate School of Industry, Pukyong National University) ;
  • Kim, Heon-Joo (Dept of Metallurgical Eng., Pukyong National University)
  • 투고 : 2016.03.11
  • 심사 : 2016.03.25
  • 발행 : 2016.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effects of scrap content on the hot tearing property and tensile property were investigated in AC2BS alloy. The hot tearing strengths were $16.4kgf/cm^2$, $15.2kgf/cm^2$, $14.9kgf/cm^2$ and $13.3kgf/cm^2$, respectively, under the constant solid fraction of 29.3% when the scrap contents of the specimens were 0%, 20%, 35% and 50%. In the same way, tensile strengths of the as-cast condition were $24.5kgf/mm^2$, $23.7kgf/mm^2$, $17.3kgf/mm^2$ and $16.0kgf/mm^2$, respectively, and the corresponding tensile strengths of the T6 heat treatment condition were $27.2kgf/mm^2$, $26.7kgf/mm^2$, $24.2kgf/mm^2$ and $23.9kgf/mm^2$. Hot tearing strength and tensile strength decreased as scrap content of the specimen increased. According to the evaluation of the quantitative hot tearing and tensile test results, the decrease of these strengths is due to the presence of oxide films which act as crack initiation site of the specimens. Therefore, elimination of oxide films of aluminum melt to maintain melt cleanliness is required.

키워드

참고문헌

  1. J. L. Jorstad, Die Casting Engineer, "Future technology in Aluminum die casting", 9 (2006) 18-25.
  2. G. Trenda, Cast Plant Technol., "Die casting alloy for ductile thin-walled Structural Parts", 22 (2006) 28.
  3. Kim HS, Kim HM and Kim WY, Trends in Metals and Materials Engineering, "Trends in the Aluminum Scrap Recycling Industry" 23 (2010) 23-30.
  4. J. A. S. Tenorio and D. C. R. Espinosa, J. Light Metals 2, "Effect of salt/oxide interaction on the process of aluminum recycling.", (2002) 89-93.
  5. S. Das and W. Yin, Journal of Metals, "Trends in the Global Aluminum Fabrication Industry", 59 (2007) 83-87.
  6. Lee YI, Han YS, Kim DH and Kim WT, The Korean Institute of Metals and Materials, "Understanding and use of aluminum application", Seoul (2005) 272.
  7. Gabrielle Gaustada, B. Elsa Olivetti and Randolph Kirchainb, Resources Conservation and Recycling, "Improving aluminum recycling: A survey of sorting and impurity removal technologies", 58 (2012) 79-87. https://doi.org/10.1016/j.resconrec.2011.10.010
  8. A. R. Khoei, I. Masters, and D. T. Gethin, J., Materials Processing Technology, "Design optimisation of aluminium recycling processes using Taguchi technique", 127 (2002) 96- 106. https://doi.org/10.1016/S0924-0136(02)00273-X
  9. J. L. Jorstad, Wayne and D. L. Zalensas, American Foundrymen's Society Inc, "Aluminum Casting Technology 2nd Edi", (1997) 21-26.
  10. M. Jaradeh and T. Carberg, Light metal, "Method Developed for Quantitative Assessment of Inclusions in Aluminum Billets", (2007) 679-684.
  11. T. H. Nguyen and R. T. Foley, J. Electrochem. Soc., "The chemical nature of aluminium corrosion, III. The dissolution mechanism of aluminium oxide and aluminium powder in various electrolytes.", 127 (1980) 2563-2566. https://doi.org/10.1149/1.2129520
  12. Kim HJ, J. Korea Foundry Society, "Quantitative Evaluation of Solidification Crack Strength of AC2B Aluminum Casting Alloy", 34 (2014) 136-142. https://doi.org/10.7777/jkfs.2014.34.4.136
  13. D. Dispinar and J. Campbell, International Journal of Cast Metals Research, "Critical assessment of reduced pressure test. Part I: porosity phenomena", 17 (2004) 280-286. https://doi.org/10.1179/136404604225020696
  14. D. Dispinar and J. Campbell, International Journal of Cast Metals Research, "Critical assessment of reduced pressure test. Part II: quantification", 17 (2004) 287-294. https://doi.org/10.1179/136404604225020704
  15. D. Dispinar and J. Campbell, Foundry Trade Journal, "Metal quality studies in secondary remelting of aluminium", 178. 3612 (2004) 78-81.
  16. Merton C. Flemings, Solidification Processing, McGraw-Hill Book, (1974) 247-8.
  17. Kim HJ, J. Korea Foundry Society, "Effect of Mold Preheat Temperature on Solidification Crack Strength of AC2B Aluminum Alloy", 34 (2014) 162-169. https://doi.org/10.7777/jkfs.2014.34.5.162
  18. H. G. Fjr and A. Mo, Metall. Meter. Trans. B, "A mathematical model for thermal stresses in direct chill casting of Aluminium billets", 21B (1990) 1049-1061.
  19. B. Magnin, L. Katgerman and B. Hannart, Proc. 7th Conf. Modelling of Casting, Welding and advanced solidification processes, VII, Edit by X. M. Cross and J. Campbell, "Physical and numerical modelling of thermal stress generation during DC casting of Aluminum alloys", Warrendale, PA, USA (1995) 303-310.
  20. D. J. Lahaie and M. Bouchard, Metall. Meter. Trans. B, "Physical modeling of the deformation mechanisms of semisolid bodies and a mechanical criterion for hot tearing", 32B (2001) 697-705.
  21. N. N. Prokhorov, Russian Castings Production, "Re nement in the hot tearing of cast Al-Cu alloy", 2 (1962) 172-175.
  22. M. Rappaz, J. M. Drezet and M. Gremaud, Metall. Meter. Trans. A, "A new hot-tearing criterion", 30A (1999) 449-455.
  23. D. G. Eskin and L. Katgerman, Metall. Meter. Trans. A, "A quest for a new hot-tearing criterion", 38A (2007) 1511-1519.
  24. A. K. Dahle, S. Instone and T. Sumitomo, Metallurgical and Materials Transaction A, "Relationship between Tensile and Shear Strengths of the Mushy Zone in Solidifiying Aluminum Alloys", 34A (2003) 105-113.
  25. G. B. Eisaabadi, P. Davami, Kim SK and N. Varahram, Materials Science and Engineering A, "Effects of hydrogen and oxides on tensile properties of Al-Si-Mg cast alloys", 552 (2012) 36-47. https://doi.org/10.1016/j.msea.2012.04.111
  26. Kim KB, Seok HK, Kim YS, Yoon JC, Lee DY, Chunga CR and Hana DS, Journal of Ceramic Processing Research, "Optimization of melt treatment for in-house recycling of Al alloy scrap", 7 (2006) 266-270.

피인용 문헌

  1. AC4A 합금의 충격특성 및 피로특성에 미치는 스크랩 함량의 영향 vol.36, pp.6, 2016, https://doi.org/10.7777/jkfs.2016.36.6.187
  2. 재활용 AC4A 알루미늄 합금의 충격 및 피로 특성에 미치는 (Ti-B), Sr 첨가제의 영향 vol.39, pp.4, 2019, https://doi.org/10.7777/jkfs.2019.39.4.61