DOI QR코드

DOI QR Code

Non-deformable support system application at tunnel-34 of Ankara-Istanbul high speed railway project

  • Aksoy, C.O. (Department of Mining Engineering, Dokuz Eylul University) ;
  • Uyar, G.G. (Department of Mining Engineering, Hacettepe University) ;
  • Posluk, E. (Turkish Republic National Railway) ;
  • Ogul, K. (Turkish Republic National Railway) ;
  • Topal, I. (Department of Mining Engineering, Dumlupınar University) ;
  • Kucuk, K. (Department of Mining Engineering, Dokuz Eylul University)
  • 투고 : 2015.10.27
  • 심사 : 2016.03.24
  • 발행 : 2016.06.10

초록

Non-Deformable Support System (NDSS) is one of the support system analysis methods. It is likely seen as numerical analysis. Obviously, numerical modeling is the key tool for this system but not unique. Although the name of the system makes you feel that there is no deformation on the support system, it is not true. The system contains some deformation but in certain tolerance determined by the numerical analyses. The important question is what is the deformation tolerance? Zero deformation in the excavation environment is not the case, actually. However, deformation occurred after supporting is important. This deformation amount will determine the performance of the applied support. NDSS is a stronghold analysis method applied in full to make this work. While doing this, NDSS uses the properties of rock mass and material, various rock mass failure criteria, various material models, different excavation geometries, like other methods. The thing that differ NDSS method from the others is that NDSS makes analysis using the time dependent deformation properties of rock mass and engineering judgement. During the evaluation process, NDSS gives the permission of questioning the field observations, measurements and timedependent support performance. These transactions are carried out with 3-dimensional numeric modeling analysis. The goal of NDSS is to design a support system which does not allow greater deformation of the support system than that calculated by numerical modeling. In this paper, NDSS applied to the problems of Tunnel 34 of the same Project (excavated with NATM method, has a length of 2218 meters), which is driven in graphite schist, was illustrated. Results of the system analysis and insitu measurements successfully coincide with each other.

키워드

과제정보

연구 과제 주관 기관 : TUBITAK

참고문헌

  1. Aksoy, C.O., Ogul, K., Topal, I., Posluk, E. and Gicir, A. (2014), "Reducing deformation effect of tunnel with non-deformable support system by jointed rock mass model", Tunnel. Underg. Space Tech., 2, 218-227.
  2. Aksoy, C.O., Onargan, T. and Guney, A. (2009), "Numerical modeling for the determination of umbrella arch and face bolt effects on the ground settlement induced by urban shallow tunneling", BALKANMINE, 371-378.
  3. Aksoy, C.O., Onargan, T., Turk, N., Pamukcu, C., Kucuk, K. and Ozacar, V. (2012), "Analysis and evaluation report about disagreements between GLI Organization and Yapi-Tek-Unuvar work in partnership for Project gallery opening, support the business of making and shipping equipment supply in Omerler Mechanization Extension project", Dokuz Eylul University.
  4. Aksoy, C.O., Ozacar, V. and Kantarci, O. (2010), "An example for estimation of rock mass deformations around an underground opening by numerical modeling", Int. J. Rock Mech. Min. Sci., 47, 272-278. https://doi.org/10.1016/j.ijrmms.2009.12.001
  5. Aksoy, C.O., Genis, M., Aldas, G.G., Ozacar, V., Ozer, S.C. and Yilmaz, O. (2012), "A comparative study of the determination of rock mass deformation modulus by using different empirical approaches", Eng. Geology, 131-132. https://doi.org/10.1016/j.enggeo.2012.01.009
  6. Aksoy, C.O., Ogul, K., Topal, I., Ozer, S.C., Ozacar, V. and Posluk, E. (2012), "Numerical modeling of non-deformable support in swelling and squeezing rock", Int. J. Rock Mech. Min. Sci., 52, 61-70. https://doi.org/10.1016/j.ijrmms.2012.02.008
  7. Aksoy, C.O. and Onargan, T. (2010), "The role of umbrella arch and face bolt as deformation preventing support system in preventing building damages", Tunnel. Underg. Space Tech., 25, 553-559 https://doi.org/10.1016/j.tust.2010.03.004
  8. Aksoy, C.O. (2008), "Chemical injection application at tunnel service shaft to prevent ground settlement induced by ground water drainage: a case study", Int. J. Rock Mech. Min. Sci., 45, 376-383. https://doi.org/10.1016/j.ijrmms.2007.06.005
  9. Aksoy, C.O., Onargan, T., Yenice, H., Kucuk, K. and Kose, H. (2006), "Determining the stress and convergence at Beypazari trona field by three-dimensional elastic-plastic finite element analysis: A case study", Int. J. Rock Mech. Min. Sci., 43, 166-178. https://doi.org/10.1016/j.ijrmms.2005.06.004
  10. Barla, G. (1995), Tunnelling Under Squeezing Rock Conditions.
  11. Barla, G., Bonini, M. and Semeraro, M. (2011), "Analysis of the behaviour of a yield-control support system in squeezing rock", Tunnel. Underg. Space Tech., 26, 146-154. https://doi.org/10.1016/j.tust.2010.08.001
  12. Barton, N. (2012), Personnel Interview at EUROCK 2012.
  13. Cantieni, L. and Anagnostou, G. (2009), "The interaction between yielding supports and squeezing ground", Tunnel. Underg. Space Tech., 24, 309-322. https://doi.org/10.1016/j.tust.2008.10.001
  14. Carranza-Torres, C. and Fairhurst, C. (2000), "Application of the convergence confinement method of tunnel design to rock masses that satisfy the Hoek-Brown failure criteria", Tunnel. Underg. Space Tech., 15, 187-213. https://doi.org/10.1016/S0886-7798(00)00046-8
  15. Chen, G., Li, H and Zhou, W. (2007), "Analysis of block removability in rock excavation by probabilistic approach", Proceedings of the 1st Canada-US Rock Mechanics Symposium, Vancouver, Canada.
  16. Curran, J.H., Hammah, R.E. and Yacoub, T.E. (2003), A two-dimensional approach for designing tunnel support in weak rock, Rocscience Inc., Canada
  17. Eisenstein, Z. and Branco, P. (1991), "Convergence-confinement mehtod in shallow tunnels", Tunnel. Underg. Space Tech., 6, 343-346. https://doi.org/10.1016/0886-7798(91)90146-U
  18. Feng, X.T. and Hudson, J.A. (2008), "Specifying the required information for rock engineering modeling and design", Int. J. Rock Mech. Min. Sci., 47, 179-94.
  19. Hasanpour, R., Rostami, J. and Ozcelik, Y. (2015), "Impact of overcut on interaction between shield and ground in the tunneling with a double-shield TBM", Rock Mech. Rock Eng., 1-8.
  20. Hasanpour, R., Chakeri H., Ozcelik, Y. and Denek H. (2012), "Evaluation of surface settlements in the Istanbul metro in terms of analytical, numerical and direct measurements", Bull. Eng. Geol. Environ., 71, 499-510. https://doi.org/10.1007/s10064-012-0428-5
  21. Jemas Ltd. (2009), The borehole report between Tunnel 33 and Tunnel 34.
  22. Kocyigit, A., Kaymakci, N., Rojay, B., Ozcan, E., Dirik, K. and Ozcelik, Y. (1991), "The geological report on Inegol Bozuyuk area", TPAO Report, 3049, 139 .
  23. Kucuk, K., Genis, M., Onargan, T., Aksoy, C.O., Guney, A. and Altindag, R. (2009), "Chemical injection to prevent building damage induced by ground water drainage from the shallow tunnels", Int. J. Rock Mech. Min. Sci., 46, 1136-1143. https://doi.org/10.1016/j.ijrmms.2009.01.004
  24. Marinos, P. and Hoek, E. (2000), "GSI: a geologically friendly tool for rock mass strength estimation", Proceedings of the GeoEng2000 at the international conference on geotechnical and geological engineering, Melbourne, Technomic publishers, Lancaster.
  25. Miranda, T., Dias, D., Pinheiro, M. and Eclaircy-Caudron, S. (2015), "Methodology for real-time adaptation of tunnels support using the observational method", Geomech. Eng., 8(2), 153-171. https://doi.org/10.12989/gae.2015.8.2.153
  26. Oreste, P. and Oggeri, C. (2012), "Tunnel static behavior assessed by a probabilistic approach to the backanalysis", Am. J. Appl. Sci., 9(7), 1137. https://doi.org/10.3844/ajassp.2012.1137.1144
  27. Panet, M. and Guenot, A. (1982), "Analysis of convergence behind face of a tunnel", Proc. Tunnelling, IMM, London.
  28. Plaxis Manual (2008).
  29. Shin, Y., Song, K., Lee, I. and Cho, G. (2011), "Interaction between tunnel supports and ground convergence-consideration of seepage forces", Int. J. Rock Mech. Min. Sci., 48, 394-405. https://doi.org/10.1016/j.ijrmms.2011.01.003
  30. Singh, M.N., Samadhiya, N.K. and Sandeep A. (1995), "Semi-empirical method for the design of support systems in underground openings", International Journal of Tunnelling and Underground Space Technology, U.K.
  31. Simsek, O., Aygar, E.B. and Eritin, A. (2009), Inonu-Kosekoy High Speed Railway Project, SIAL Yer Bilimleri Ltd. sti.

피인용 문헌

  1. Use of Polyamide-6 Type Engineering Polymer as Grouted Rock Bolt Material vol.3, pp.4, 2017, https://doi.org/10.1007/s40891-017-0114-6
  2. Support System for Tunnelling in Squeezing Ground of Qingling-Daba Mountainous Area: A Case Study from Soft Rock Tunnels vol.2019, pp.None, 2019, https://doi.org/10.1155/2019/8682535
  3. Influence of time-dependency on elastic rock properties under constant load and its effect on tunnel stability vol.20, pp.1, 2020, https://doi.org/10.12989/gae.2020.20.1.001
  4. Tunnel lining load with consideration of the rheological properties of rock mass and concrete vol.21, pp.1, 2020, https://doi.org/10.12989/gae.2020.21.1.053
  5. An analysis of rock mass characteristics which influence the choice of support vol.21, pp.4, 2020, https://doi.org/10.12989/gae.2020.21.4.371
  6. High-density polyurethane rigid foam usability as liner support material in rock engineering vol.13, pp.11, 2016, https://doi.org/10.1007/s12517-020-05396-6