DOI QR코드

DOI QR Code

A new formulation of the J integral of bonded composite repair in aircraft structures

  • Serier, Nassim (LMPM, Department of Mechanical Engineering, University of SidiBel Abbes) ;
  • Mechab, Belaid (LMPM, Department of Mechanical Engineering, University of SidiBel Abbes) ;
  • Mhamdia, Rachid (LMPM, Department of Mechanical Engineering, University of SidiBel Abbes) ;
  • Serier, Boualem (LMPM, Department of Mechanical Engineering, University of SidiBel Abbes)
  • 투고 : 2015.08.08
  • 심사 : 2016.01.11
  • 발행 : 2016.06.10

초록

A three-dimensional finite element method is used for analysis of repairing cracks in plates with bonded composite patch in elastic and elastic plastic analysis. This study was performed in order to establish an analytical model of the J-integral for repair crack. This formulation of the J-integral to establish models of fatigue crack growth in repairing aircraft structures. The model was developed by interpolation of numerical results. The obtained results were compared with those calculated with the finite element method. It was found that our model gives a good agreement of the J-integral. The arrow shape reduces the J integral at the crack tip, which improves the repair efficiency.

키워드

참고문헌

  1. ABAQUS/CAE (2007), Ver 6.9 User's Manual, Hibbitt, Karlsson & Sorensen, Inc.
  2. Albedah, A., Benyahia, F., Dinar, H. and Bachir Bouiadjra, B. (2013), "Analytical formulation of the stress intensity factor for crack emanating from central holes and repaired with bonded composite patch in aircraft structures", Compos. Part B: Eng., 45, 852-857. https://doi.org/10.1016/j.compositesb.2012.08.019
  3. Baker, A. (1984), "Repair of cracked or defective metallic aircraft components with advanced fiber composites-an overview of Australian work", J. Compos. Struct., 2, 153-81. https://doi.org/10.1016/0263-8223(84)90025-4
  4. Baker, A. (1995), "Bonded composite repair of metallic aircraft components overview of Australian activities", AGARD-CP-550, 1-14.
  5. Bachir Bouiadjra, B., Achour, T., Berrahou, M., Ouinas, D. and Feaugas, X. (2010), "Numerical estimation of the mass gain between double symmetric and single bonded composite repairs in aircraft structures", J. Mater. Des., 31, 3073-7. https://doi.org/10.1016/j.matdes.2010.01.006
  6. Benyahia, F., Albedah, A. and Bachir Bouiadjra, B. (2014), "Stress intensity factor for repaired circum ferential cracks in pipe with bonded composite wrap", J. Press. Ves. Tech., 136(4), 041201-5. https://doi.org/10.1115/1.4026022
  7. Cao, Z. and Liu, Y. (2012), "A new numerical modelling for evaluating the stress intensity factors in 3-D fracture analysis", Struct. Eng. Mech., 43, 321-336. https://doi.org/10.12989/sem.2012.43.3.321
  8. Cetisli, F. and Kaman, M.O. (2014), "Numerical analysis of interface crack problem in composite plates jointed with composite patch", Steel Compos. Struct., 16, 203-220. https://doi.org/10.12989/scs.2014.16.2.203
  9. Gu, L., Kasavajhala, A.R.M. and Zhao, S. (2011), "Finite element analysis of cracks in aging aircraft structures with bonded composite-patch repairs", Compos. Part B, 42, 505-10. https://doi.org/10.1016/j.compositesb.2010.11.014
  10. Hosseini-Toudeshky, H., Ghaffari, M.A. and Mohammadi, B. (2011), "Fatigue propagation of induced cracks by stiffeners in repaired panels with composite patches", Proc. Eng., 10, 3285-3290. https://doi.org/10.1016/j.proeng.2011.04.542
  11. Jones, R. and Callinan, R.J. (1979), "Finite element analysis of patched cracks", J. Struct. Mech., 7, 107-30. https://doi.org/10.1080/03601217908905315
  12. Jones, R., Chiu, W.K. and Marshall, I.H. (2004), "Weight functions for composite repairs to stiffened panels", Eng. Fail. Anal., 11, 49-78. https://doi.org/10.1016/S1350-6307(03)00061-X
  13. Krueger, R. (2002), "The virtual crack closure technique: history, approach and applications", ICASE Report No. 2002-10, Hampton, VA, USA.
  14. Kujawski, D. (1991), "Estimations of stress intensity factor for small cracks et notches", Fatig. Eng. Mater. Struct., 14, 953-65. https://doi.org/10.1111/j.1460-2695.1991.tb00005.x
  15. Leski, A. (2007), "Implementation of the virtual crack closure technique in engineering FE calculations", Finite Elem. Anal. Des., 43, 261-8. https://doi.org/10.1016/j.finel.2006.10.004
  16. Oudad, W., Bachir Bouiadjra, B., Belhouari, M., Touzain, S. and Feaugas, X. (2009), "Analysis ofthe plastic zone size ahead of repaired cracks with bonded composite patch of metallic aircraft structures", Comput. Mater. Sci., 46, 950-4. https://doi.org/10.1016/j.commatsci.2009.04.041
  17. Ouinas, D., Bachir Bouiadjra, B., Himouri, S. and Benderdouche, N. (2012), "Progressive edge cracked aluminum plate repaired with B adhesively bonded composite patch under full width disbond", J. Compos. Part B: Eng., 43, 805-11. https://doi.org/10.1016/j.compositesb.2011.08.022
  18. Pyo, C.R., Okada, H. and Atluri, S.N. (1995), "An elastic-plastic finite element alternating method for analyzing wide-spread fatigue damage in aircraft structures",Comput. Mech., 16, 62-68. https://doi.org/10.1007/BF00369886
  19. Sapora, A., Cornetti, P. and Carpinteri, A. (2014), "V-notched elements under mode II loading conditions", Struct. Eng. Mech., 49, 499-508. https://doi.org/10.12989/sem.2014.49.4.499

피인용 문헌

  1. A new analytical generalization of the J and G-theta integrals for planar cracks in a three-dimensional medium 2018, https://doi.org/10.1016/j.tafmec.2018.01.004
  2. Effect of the corrosion of plate with double cracks in bonded composite repair vol.64, pp.3, 2017, https://doi.org/10.12989/sem.2017.64.3.323
  3. Relationship between $${J}_{c}$$ and the dissipation energy in the adhesive layer of a layered composite vol.224, pp.2, 2020, https://doi.org/10.1007/s10704-020-00464-0