DOI QR코드

DOI QR Code

Effect of hysteretic constitutive models on elasto-plastic seismic performance evaluation of steel arch bridges

  • Wang, Tong (College of Architecture & Civil Engineering, Zhejiang University) ;
  • Xie, Xu (College of Architecture & Civil Engineering, Zhejiang University) ;
  • Shen, Chi (International Project Group, Chodai Co., Ltd.) ;
  • Tang, Zhanzhan (College of Architecture & Civil Engineering, Zhejiang University)
  • 투고 : 2015.07.19
  • 심사 : 2016.01.11
  • 발행 : 2016.05.25

초록

Modified two-surface model (M2SM) is one of the steel elasto-plastic hysteretic constitutive models that consider both analysis accuracy and efficiency. However, when M2SM is used for complex strain history, sometimes the results are irrational due to the limitation of stress-strain path judgment. In this paper, the defect of M2SM was re-modified by improving the judgment of stress-strain paths. The accuracy and applicability of the improved method were verified on both material and structural level. Based on this improvement, the nonlinear time-history analysis was carried out for a deck-through steel arch bridge with a 200 m-long span under the ground motions of Chi-Chi earthquake and Niigata earthquake. In the analysis, we compared the results obtained by hysteretic constitutive models of improved two-surface model (I2SM) presented in this paper, M2SM and the bilinear kinematic hardening model (BKHM). Results show that, although the analysis precision of displacement response of different steel hysteretic models differs little from each other, the stress-strain responses of the structure are affected by steel hysteretic models apparently. The difference between the stress-strain responses obtained by I2SM and M2SM cannot be neglected. In significantly damaged areas, BKHM gives smaller stress result and obviously different strain response compared with I2SM and M2SM, and tends to overestimate the effect of hysteretic energy dissipation. Moreover, at some position with severe damage, BKHM may underestimate the size of seismic damaged areas. Different steel hysteretic models also have influences on structural damage evaluation results based on deformation behavior and low cycle fatigue, and may lead to completely different judgment of failure, especially in severely damaged areas.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundation of China

참고문헌

  1. Alvarez, J.J., Aparicio, A.C., Jara, J.M. and Jara, M. (2012), "Seismic assessment of long-span arch bridge considering the variation in axial forces induced by earthquakes", Eng. Struct., 34, 69-80. https://doi.org/10.1016/j.engstruct.2011.09.013
  2. Cetinkaya, O.T., Nakamura, S. and Takahashi, K. (2006), "A static analysis-based method for estimating the maximum out-of-plane inelastic seismic response of steel arch bridges", Eng. Struct., 28(5), 635-647. https://doi.org/10.1016/j.engstruct.2005.09.017
  3. Cetinkaya, O.T., Nakamura, S. and Takahashi, K. (2009), "Expansion of a static analysis-based out-of-plan maximum inelastic seismic response estimation method for steel arch bridges to in-plane response estimation", Eng. Struct., 31(9), 2209-2212. https://doi.org/10.1016/j.engstruct.2009.02.045
  4. Chavez, H. and Alvarez J.J. (2008), "Seismic performance of a long span arch bridge taking account of fluctuation of axial force", The 14th World Conference on Earthquake Engineering, Beijing, China.
  5. Chen, X., Ge, H. and Usami, T. (2011), "Seismic demand of buckling-restrained braces installed in steel arch bridges under repeated earthquakes", J. Earthq. Tsunami, 5(2), 119-150. https://doi.org/10.1142/S1793431111000942
  6. Dalafalis, Y.F. and Popov E.P. (1975), "A model of nonlinearly hardening material for complex loading", Acta Mechanica, 21(3), 173-192. https://doi.org/10.1007/BF01181053
  7. Gao, S. and Ge, H. (2008), "Applicable range of steel constitutive models under cyclic load", China J. Highway Trans., 21(6), 69-75. (in Chinese)
  8. Ge, H. and Kang, L. (2014), "Ductile crack initiation and propagation in steel bridge piers subjected to random cyclic loading", Eng. Struct., 59, 809-820. https://doi.org/10.1016/j.engstruct.2013.12.006
  9. Ge, H., Kono, T. and Usami, T. (2004), "Failure strain of steel segments subjected to combined compression and bending and application to dynamic verification of steel arch bridges", J. Struct. Eng., JSCE, 50A, 1479-1488. (in Japanese)
  10. Ge, H. and Luo, X. (2011), "A seismic performance evaluation method for steel structures against local buckling and extra-low cycle fatigue", J. Earthq. Tsunami, 5(2), 83-99. https://doi.org/10.1142/S1793431111001005
  11. Goto, Y., Wang, Q. and Obata M. (1998), "FEM analysis for hysteretic behavior of thin-walled columns", J. Struct. Eng., 124(11), 1290-1301. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:11(1290)
  12. Hu, X., Xie, X., Tang, Z., Shen, Y., Wu, P. and Song, L. (2015), "Case study on stability performance of asymmetric steel arch bridge with inclined arch ribs", Steel Compos. Struct., 18(1), 273-288. https://doi.org/10.12989/scs.2015.18.1.273
  13. Liang, C.Y. and Chen, A. (2010), "A method for examining the seismic performance of steel arch deck bridges", Front. Architect. Civ. Eng. China, 4(3), 311-320. https://doi.org/10.1007/s11709-010-0080-8
  14. Lu, Z., Ge, H. and Usami, T. (2004a), "Applicability of pushover analysis-based seismic performance evaluation procedure for steel arch bridges", Eng. Struct., 26(13), 1957-1977. https://doi.org/10.1016/j.engstruct.2004.07.013
  15. Lu, Z., Usami, T. and Ge, H. (2004b), "Seismic performance evaluation of steel arch bridges against major earthquakes", Part 2: Simplified verification procedure, Earthq. Eng. Struct. Dyn., 33(14), 1355-1372. https://doi.org/10.1002/eqe.406
  16. Miyoshi, T., Sakimoto, T., Tsuruta, E., Watanabe, H. and Hirota, T. (2003), "Effect of hardening rules of steel on the analysis of cyclic behavior of steel structures", J. Struct. Eng., JSCE, 49A, 403-413. (in Japanese)
  17. Morz, Z. (1969), "An attempt to describe the behavior of metal under cyclic loads using a more general work hardening model", Acta Mechanica, 7(2-3), 199-212. https://doi.org/10.1007/BF01176668
  18. Nonaka, T. and Ali, A. (2001), "Dynamic response of half-through steel arch bridge using fiber model", J. Bridge Eng., ASCE, 6(6), 482-488. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(482)
  19. Shen, C., Mamaghani, I., Mizuno, E. and Usami, T. (1995), "Cyclic behavior of structural steel, II: Theory", J. Eng. Mech., ASCE, 121(11), 1165-1172. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:11(1165)
  20. Shi, G., Wang, M., Bai, Y., Wang, F., Shi, Y. and Wang, Y. (2012), "Experimental and modeling study of high-strength structural steel under cyclic loading", Eng. Struct., 37, 1-13. https://doi.org/10.1016/j.engstruct.2011.12.018
  21. Usami, T. (2007), Guidelines for seismic and damage control design of steel arch bridges, Tokyo: Gihodo Shuppan Co. Ltd. (In Japanese)
  22. Usami T., Gao, S. and Ge, H. (2000), "Stiffened steel box columns. Part 1: Cyclic Behavior", Earthq. Eng. Struct. Dyn., 29(11), 1691-1706. https://doi.org/10.1002/1096-9845(200011)29:11<1691::AID-EQE989>3.0.CO;2-U
  23. Usami, T., Lu, Z. and Ge, H. (2005), "A seismic upgrading method for steel arch bridges using bucklingrestrained braces", Earthq. Eng. Struct. Dyn., 34(4-5), 471-496. https://doi.org/10.1002/eqe.442
  24. Usami, T., Lu, Z., Ge, H. and Kono, T. (2004), "Seismic performance evaluation of steel arch bridges against major earthquakes", Part 1: Dynamic analysis approach, Earthq. Eng. Struct. Dyn., 33(14), 1337-1354. https://doi.org/10.1002/eqe.407

피인용 문헌

  1. Hysteresis Model for Fiber Elements in Effective Damaged Zone of Square-Section Steel Piers Considering Local Instability Effect of Steel Plates vol.146, pp.8, 2020, https://doi.org/10.1061/(asce)st.1943-541x.0002698
  2. Post-earthquake strength assessment of a steel bridge considering material strength degradation vol.17, pp.3, 2021, https://doi.org/10.1080/15732479.2020.1750041
  3. Research on the multi-shear spring model for circular-section steel piers vol.188, pp.None, 2016, https://doi.org/10.1016/j.jcsr.2021.107041