References
- Yan, D., EI-wardany, T. I. and Elbestawi, M. A., "A Multi-sensor Strategy for Tool Failure Detection in Milling", International Journal of Machine Tools and Manufacture, Vol. 35, No. 3, pp. 383-398, 1995. https://doi.org/10.1016/0890-6955(94)E0021-A
- Lee, J. K., Lyu, J. H., Kim, M. K. and Kook, J. H., "A Study on the Evaluation of End Mills for High Speed Machining", Proceedings of the Korean Society of Precision Engineering Autumn Conference, pp. 833-837, 2000.
- Bae, H. J. and Park, H. S., "Analysis of Working Factors for Improvement of Surface Roughness on High Speed End-Milling" Journal of the Korean Society of Precision Engineering, Vol. 21, No. 6, pp. 52-59, 2004.
- Kim, G. H., Yang, S. C. and Park, Y. C., "A Study on the Characteristics on Ultra Precision Machining of Al6061-T651", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 4 No. 1, pp.43-48, 2005.
- Kim, K. R., Ko, H. J., Cho, Y. T. and Jung, Y. G., "Development of Angle Spindle for Shape Machining of Hydrostatic Bearing", Proceeding of the Journal of the Korean Society of Manufacturing Process Engineers Spring Conference, pp. 71, 2013.
- Park, H. K., Lee, S. M., Lee, C. S., Chae, S. S., Lee, W. S., Choi, Y. S., Jo, H. T., Baek, Y. J. and Lee, J. C., "A Study on the Characteristics of High-Speed Small-Diameter Wipe Milling for Al 6061", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 24-28, 2012.
Cited by
- A Study on the Condensation Heat Transfer Characteristics of a Loop Heat Pipe Heat Exchanger for High Speed Rotary Shaft Cooling vol.16, pp.4, 2017, https://doi.org/10.14775/ksmpe.2017.16.4.147
- 6축 병렬기구 공작기계의 머신 시뮬레이션과 앵글밀링헤드 적용에 관한 연구 vol.16, pp.5, 2016, https://doi.org/10.14775/ksmpe.2017.16.5.047
- 협소 공간 절삭가공용 앵글 헤드 스핀들 케이스 소형화에 대한 연구 vol.18, pp.6, 2016, https://doi.org/10.14775/ksmpe.2019.18.6.098
- A Study on Surface Roughness in Circular Pocket Machining of SCM415 Steel vol.18, pp.7, 2019, https://doi.org/10.14775/ksmpe.2019.18.7.077
- SCM415강의 원형포켓 가공시 치수정밀도에 관한 연구 vol.18, pp.9, 2019, https://doi.org/10.14775/ksmpe.2019.18.9.058