한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제15권2호
  • /
  • Pages.46-50
  • /
  • 2016
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

구난장갑차 동력인출장치의 오일조절용 어댑터 개발

A Study on the Oil-Controlling Adapter of Power Take-Off for Armored Recovery Vehicles

  • 투고 : 2016.01.12
  • 심사 : 2016.01.30
  • 발행 : 2016.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

When rotating the clutch drum in the power take-off (PTO) gear box of an armored recovery vehicle, lots of inner oil is drained through the adapter by centrifugal force. Therefore, a lack of lubrication is caused by inner oil loss, and the bearing is damaged by overheating. This study, therefore, aims to design an oil-controlling adapter by using shape alteration to prevent oil loss. Both the original and improved adapters were tested at 1,800rpm by using an operational test machine. When applying the original adapter to the gear box, the bearing was damaged by overheating, which was caused by the lack of lubrication. When applying the improved oil-controlling adapter, on the other hand, it prevented the loss of inner oil. Applying the improved adapter is expected to prevent the overheating caused by lack of lubrication.

키워드

참고문헌

  1. Jung, W. S., Lee, B. S. and Sim, H. S., "A Application Method of Engine-Generator Power System in Ambulance," Journal of The Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 187-192, 2012.
  2. Ku, H. K., Kim, J. W., Won, C. and Song, J. I., "Optimization and Structure Analysis of Brake Disc for Free-fall Winch," Journal of The Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 55-61, 2012.
  3. Song. B. J., The Report on the Next Generation Rescue Armored Vehicle Crane Structure, DTaQ-10-2583-R, pp. 1-39, 2010.
  4. Jung, J. W., Jung, U. H., Kim, C. S., Yu, Y. S., Park, K. C., Park, K. C., "Structural Integrity Evaluation for Crane Braket of Armored Recovery Vehicle", Journal of the Korea Institute of Military Science and Technology, Vol. 16, No. 5, pp. 653-658, 2013. https://doi.org/10.9766/KIMST.2013.16.5.653
  5. Han, D. S., Ha, J. M. and Han, G. J., "Creative Design of Large-Angle Pin Type Load Cell for the Overload Limiter of a Movable Crane", Journal of The Korean Society of Manufacturing Process Engineers, Vol. 9, No. 1, pp. 35-41, 2010.