참고문헌
- Choung, J. M., Kim, G. S., Jang, Y. S., Choe, I. H. and Heo, M. S., "Study on the Static and Dynamic Structural Analysis Procedure of Excavors," Proceedings of KSME 2003 Spring Annual Meeting, pp. 539-543, 2003.
- Kim, M. S., Kim, P. Y., Park, J. S. and Baek, S. J., "A Study of Fatigue Design System for Excavator Attachments," Proceedings of KSME 2009 Spring Annual Meeting, pp. 146-149, 2009.
- Park, S. C., "Design of Excavator Boom Structure Based on Fatigue Strength of Weldment(I)," Journal of Welding and Joining, Vol. 28, No. 5, pp. 58-63, 2010. https://doi.org/10.5781/KWJS.2010.28.5.058
- Park, S. C., "Design of Excavator Boom Structure Based on Fatigue Strength of Weldment(II)," Journal of Welding and Joining, Vol. 29, No. 4, pp. 61-66, 2011. https://doi.org/10.5781/KWJS.2011.29.4.423
- Han, D. Y., Kim, H. K. and Lee, B. J. "Kinematic Optimal Design of Excavator with Performance Analysis," Proc. KSPE Autumn Conf., pp. 617-622, 1995.
- Steven, C. C., Applied Numerical Method with MATLAB, the McGraw-Hill, pp. 23-89, 2008.
- Lee, S. S., Hwang, Y. J. and Kim H. J., CATIA V5 Release 18 Introduction, kyobobook, pp. 79-201, 2009.
- ABAQUS, ABAQUS User's Manual Version 6.12, 2012.
- Choi, K. J., "A Study on Optimum Design of a Moving Vehicle Using the Finite Element Analysis and the Topology Optimization Techniques," A Thesis for a Doctorate, Gyeongsang National University, Republic of Korea, 2003.
- Kang, S. K., "A Study on Weight Reduction of The Vehicle Component Using Topology Optimization Technique," A Thesis for a Master, Gyeongsang National University, Republic of Korea, 2002.
- Park, J. K., "A Study on Weight Reduction of An Aircraft Structure Considered The Fatigue Life," A Thesis for a Master, Gyeongsang National University, Republic of Korea, 2003.
- Park, H. K., Kim, T. S., Jang, Y. Y. and Lee, J. C., "Structural Analysis of The Electric Type Mini Excavators," Proc. KSMPE Autumn Conf., pp. 114-114, 2014.
- Choi, D. H. and Lee, K. H., "Structural Analysis and Optimization of a Pedestal for Deck Crane," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 95-100, 2012.
- Ku, H. K., Kim, J. W., Won, C. and Song, J. I., "Optimization and Structure Analysis of Brake Disc for Free-fall Winch," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 55-61, 2012.
피인용 문헌
- Damping Device for Hydraulic Breaker: Impact and Noise Reduction vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.113
- Effect on Drive Point Dynamic Stiffness and Lightweight Chassis Component by using Topology and Topography Optimization vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.141
- A Study on Structural Improvement of the Swashplate Axial Piston Pump Valve Block (1) vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.069
- 경사 면 보정 장치의 구조 설계에 관한 연구 vol.20, pp.3, 2016, https://doi.org/10.14775/ksmpe.2021.20.03.033