참고문헌
- Kim. K. M., Yin. J. J. and Suh. Y. S., "Process optimization of sheet metal forming using operating window", ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 1-8, 2009.
- Kim. K. M. and Yin. J. J., "Robust design of springback in sheet metal forming", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 2, pp. 41-48, 2013.
- Zhang. W. and Shivpuri. R., "Probabilistic design of aluminum sheet drawing for reduced risk of wrinkling and fracture", Reliability Engineering and System Safety, Vol. 94, No. 2, pp. 152-161, 2009. https://doi.org/10.1016/j.ress.2008.02.024
- Chen. P. and Koc. M., "Simulation of springback variation in forming of advanced high strength steels", Journal of Materials Processing Technology, Vol. 190, No. 1, pp. 189-198, 2007. https://doi.org/10.1016/j.jmatprotec.2007.02.046
- Zhang. Z. T., and Lee. D., "Effects of process variables and material properties on the springback behavior of 2D-draw bending parts", SAE Technical Paper, No. 950692, pp. 11-18, 1995.
- Song. J. H., Huh. S. H., Kim. S. H. and Park. S. H., "Springback reduction in stamping of front side member with a response surface method", Proceedings of the 6th International Conference, Numisheet, pp. 303-308, 2005.
- Li. Y. Q., Cui. Z. S., Ruan. X. Y. and Zhang. D. J., "Application of six sigma robust optimization in sheet metal forming", PAIP Conference Proceedings, Vol. 778, No. A, pp. 819, 2005.
- Bae. G. H., Song. J. H., Huh. S. H., Kim. S. H. and Park. S. H., "Simulation-based prediction model of the draw-bead restraining force and its application to sheet metal forming process", Journal of Materials Processing Technology, Vol. 187, pp. 123-127, 2007.
- Stoughton. T. B., "Model of drawbead forces in sheet metal forming", Proceedings of the 15th Biennial IDDRG Congress, pp. 205-215, 1988.
- Liu. G., Lin, Z. and Bao. Y., "Optimization design of drawbead in drawing tools of autobody cover panel", Journal of Engineering Materials and Technology, Vol. 124, No. 2, pp. 278-285, 2002. https://doi.org/10.1115/1.1448523
- Kim. K. M. and Yin. J. J., "Optimization of sheet metal forming process by using decision-making theory", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 125-136, 2012.
- Jugulum. R., Taguchi. G., Taguchi. S., and Wilkins. J., Discussion on "A review and analysis of Mahalanobis-Taguchi system", Technometrics, Vol. 45, No. 1, pp. 16-21, 2003. https://doi.org/10.1198/004017002188618635
- AutoForm, Autoform Engineering GmbH and ETH, Zurich, 2013.
- Taguchi. G., Chowdhury. S., and Wu. Y., TAGUCHI'S Quality Engineering HANDBOOK, Wiley, New Jersey, pp. 318-330, 2004.
피인용 문헌
- Optimization of Inner Nitriding Process for Cr-Mo-V Steel of Small Arms Barrel by using Taguchi Experimental Design Method vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.148
- 980MPa급 열연 후판재 버링 공정의 변수 최적화 연구 vol.30, pp.6, 2016, https://doi.org/10.5228/kstp.2021.30.6.291