References
- A. Batta, A.G. Class, K. Litfin, Th. Wetzel, V. Moreau, L. Massidda, S. Thomas, D. Lakehal, D. Angeli, G. Losi, K.G. Mooney, K. Van Tichelen, Experimental and numerical investigation of liquid-metal free surface flows in spallation targets, Nucl. Eng. Des. 290 (2015) 107-118. https://doi.org/10.1016/j.nucengdes.2014.11.009
- W.H. Wang, G.M. Liu, S.H. Huang, B. Yang, J.H. Yang, D.L. Chu, H.F. Deng, Numerical Analysis of Two-phase Flow and Heat Transfer of Fuel Particles and Liquid Metal for Waste Transmutation Blanket, 2013, IEEE 25th Symposium on Fusion Engineering (SOFE), San Francisco, California, USA, 2013, pp. 1-5.
- C. Rubbia, J.A. Rubio, S. Buono, F. Carminati, N. Fietier, J. Galvez, C. Geles, Y. Kadi, R. Klapisch, P. Mandrillon, J.P. Revol, C. Roche, Conceptual Design of a Fast Neutron Operated High Power Energy Amplifier, European Organization for Nuclear Research, Geneva, CERN/AT/95-44(ET), 1995.
- Z. Chen, Y. Wu, B.X. Yuan, D.M. Pan, Nuclear waste transmutation performance assessment of an accelerator driven subcritical reactor for waste transmutation (ADS-NWT), Ann. Nucl. Energy 75 (2015) 723-727. https://doi.org/10.1016/j.anucene.2014.09.002
- N. Ai, J.Y. Yu, Y.W. Yang, Thermal-hydraulic analysis of PDSXADS spallation target, At. Energy Sci. Technol. 47 (2013) 260-265.
- L. Cinotti, G. Gheradi, The Pb-Bi cooled XADS status of development,, J. Nucl. Mater. 301 (2002) 8-14. https://doi.org/10.1016/S0022-3115(01)00721-8
- H. Ait Abderrahim, P. d'Hondt, MYRRHA: a European experimental ADS for R&D applications status at mid-2005 and prospective towards implementation, J. Nucl. Sci. Technol. 44 (2007) 491-498. https://doi.org/10.1080/18811248.2007.9711313
- M. Dierckx, D. Van Dyck, L. Vermeeren, W. Bogaerts, Research towards ultrasonic systems to assist in-vessel manipulations in liquid metal cooled reactors, IEEE Trans. Nucl. Sci. 61 (2014) 2024-2033. https://doi.org/10.1109/TNS.2014.2303951
- Venneri F. Laur, A Roadmap for Developing Accelerator Transmutation Accelerator Transmutation of Waste (ATW) Technology, A Report to Congress, Department of Energy, Washington DC, USA, 1999.
- D. Barni, P. Michelato, D. Sertore, Theoretical and experimental evaluation of the windowless interface for the TRASCO-ADS project, Am. Vacuum Soc. 22 (2009) 1810-1815.
- Y. Kurata, T. Takizuka, T. Osugi, H. Takano, The accelerator driven system strategy in Japan, J. Nucl. Mater. 301 (2002) 1-7. https://doi.org/10.1016/S0022-3115(01)00731-0
- W.S. Park, U. Shin, S.J. Han, T.Y. Song, B.H. Choi, C.K. Park, HYPER (Hybrid Power Extraction Reactor): a system for clean nuclear energy, Nucl. Eng. Des. 199 (2000) 155-165. https://doi.org/10.1016/S0029-5493(99)00066-7
- C. Chen, J. Zou, J. Zheng, M.P. Sun, H.L. Chen, Development and testing of the code for automatic generating of multitemperature continuous-energy neutron cross section libraries, Nucl. Sci. Techn. 25 (2014) 050602.
- W. Vieser, T. Esch, F. Menter, Heat Transfer Predictions Using Advanced Two Equation Turbulence Models, CFXTech. Memorandum, CFX-VAL10/0602, 2002. Available from: http://www.software.aeat.com/cfx/.
Cited by
- Effect of high-energy neutron source on predicting the proton beam current in the ADS design vol.49, pp.8, 2016, https://doi.org/10.1016/j.net.2017.08.019
- Three-dimensional CFD simulations to study the effect of impeller geometry on internal flow field in ADS upward spiral flow target vol.55, pp.12, 2016, https://doi.org/10.1080/00223131.2018.1512424