International Journal of Aeronautical and Space Sciences

  • 제17권1호
  • /
  • Pages.29-36
  • /
  • 2016
  • /
  • 2093-274X(pISSN)
  • /
  • 2093-2480(eISSN)
한국항공우주학회 (The Korean Society for Aeronautical and Space Sciences)
권호 표지
DOI QR코드

DOI QR Code

Conceptual Design Optimization of Tensairity Girder Using Variable Complexity Modeling Method

  • Yin, Shi (School of Aeronautic Science and Engineering, Beihang University) ;
  • Zhu, Ming (School of Aeronautic Science and Engineering, Beihang University) ;
  • Liang, Haoquan (School of Automation Science and Electrical Engineering, Beihang University) ;
  • Zhao, Da (School of Aeronautic Science and Engineering, Beihang University)
  • 투고 : 2015.05.04
  • 심사 : 2016.03.14
  • 발행 : 2016.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Tensairity girder is a light weight inflatable fabric structural concept which can be used in road emergency transportation. It uses low pressure air to stabilize compression elements against buckling. With the purpose of obtaining the comprehensive target of minimum deflection and weight under ultimate load, the cross-section and the inner pressure of tensairity girder was optimized in this paper. The Variable Complexity Modeling (VCM) method was used in this paper combining the Kriging approximate method with the Finite Element Analysis (FEA) method, which was implemented by ABAQUS. In the Kriging method, the sample points of the surrogate model were outlined by Design of Experiment (DOE) technique based on Optimal Latin Hypercube. The optimization framework was constructed in iSIGHT with a global optimization method, Multi-Island Genetic Algorithm (MIGA), followed by a local optimization method, Sequential Quadratic Program (SQP). The result of the optimization gives a prominent conceptual design of the tensairity girder, which approves the solution architecture of VCM is feasible and efficient. Furthermore, a useful trend of sensitivity between optimization variables and responses was performed to guide future design. It was proved that the inner pressure is the key parameter to balance the maximum Von Mises stress and deflection on tensairity girder, and the parameters of cross section impact the mass of tensairity girder obviously.

키워드

참고문헌

  1. Freeland, R. E., Bilyeu, G. D., Veal, G. R., Steiner, M. D. and Carson, D. E., "Large inflatable deployable antenna flight experiment results", Acta Astronautica, Vol. 41, No. 4, 1997, pp. 267-277. DOI:10.1016/s0094-5765(98)00057-5
  2. Lichodziejewski, D., Derbes, B., Slade, K., Mann, T. and Reinert, R., "Vacuum deployment and testing of a 4-quadrant scalable inflatable rigidizable solar sail system", AIAA Paper 3927, 2005. DOI:10.2514/6.2005-3927
  3. Yu, D. and Lv, X., "Configurations analysis for highaltitude/long-endurance airships", Aircraft Engineering and Aerospace Technology, Vol. 82, No. 1, 2010, pp. 48-59. DOI:10.1108/00022661011028119
  4. Elsley, G. H. and Devereux, A. J., Hovercraft design and construction, Cornell Maritime Press, 1968.
  5. Luchsinger, R. H., Sydow, A. and Crettol, R., "Structural behavior of asymmetric spindle-shaped Tensairity girders under bending loads", Thin-Walled Structures, Vol. 49, No. 9, 2011, pp. 1045-1053. DOI:10.1016/j.tws.2011.03.012
  6. LUCHSINGER, R. H. and TEUTSCH, U., "An analytical model for Tensairity girders", Symposium of the International Association for Shell and Spatial Structures (50th. 2009. Valencia). Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures: Proceedings. Editorial Universitat Politecnica de Valencia, 2009.
  7. Luchsinger, R. H., Pedretti, A., Steingruber, P. and Pedretti, M., "The new structural concept Tensairity: Basic principles", Progress in structural engineering, mechanics and computation, 2004, pp. 323-328.
  8. Cao Zhenggang, et al. "Basic mechanical behavior of spindle Tensairity structures", China civil engineering journal, Vol. 44, No. 1, 2011, pp. 11-18.
  9. Liang, H., Liang, H., Zhu, M. and Guo, X., "Multidisciplinary design optimization of composite wing by parametric modeling", Proceedings of the 2013 International Conference on Mechatronic Sciences, Electric Engineering and Computer (MEC), IEEE, Shenyang, China, 2013. DOI:10.1109/mec.2013.6885527
  10. Chen, X., Luo, W. and Zhang, W., Research on the Theory and Application of Multidisciplinary Desgin Optimization of Flight Vehicles, National defence of Industry Press, 2006 DOI: 10.2514/6.2006-1721
  11. Kaufman, M., Balabanov, V., Burgee, S. L., Giunta, A. A., Grossman, B., Haftka, R. T., Mason, W. H. and Watson, L. T., "Variable-complexity response surface approximations for wing structural weight in HSCT design", Computational Mechanics, Vol. 18, No. 2, 1996, pp. 112-126. DOI: 10.2514/6.1996-89
  12. Zhang, X., The basic mechanical property of tensairity [D]. Diss. Harbin Institute of Technology, 2009.
  13. Hutchison, M. G., Mason, W. H., Grossman, B. and Haftka, R. T., "Aerodynamic optimization of an HSCT configuration using variable-complexity modeling", AIAA Paper 93-0101, 1993. DOI: 10.2514/6.1993-101
  14. Jeong, S., Murayama, M. and Yamamoto, K., "Efficient optimization design method using kriging model", Journal of aircraft, Vol. 42, No. 2, 2005, pp. 413-420. DOI: 10.2514/1.17383
  15. Simpson, T. W., "Comparison of response surface and kriging models in the multidisciplinary design of an aerospike nozzle", 1998. DOI: 10.2514/6.1998-4755
  16. Ooka, R. and Komamura, K., "Optimal design method for building energy systems using genetic algorithms", Building and Environment, Vol. 44, No. 7, 2009, pp. 1538-1544. DOI: 10.1016/j.buildenv.2008.07.006
  17. Rubio-Solar, M., Vega-Rodriguez, M. A., Perez, J. M. S., Gomez-Iglesias, A. and Cardenas-Montes, M., "A FPGA optimization tool based on a multi-island genetic algorithm distributed over grid environments", Cluster Computing and the Grid, 2008. CCGRID'08. 8th IEEE International Symposium on. IEEE, 2008. DOI: 10.1109/ccgrid.2008.96
  18. Lawrence, C. T. and Tits, A. L., "A computationally efficient feasible sequential quadratic programming algorithm", Siam Journal on optimization, Vol. 11, No. 4, 2001, pp. 1092-1118. DOI: 10.1137/s1052623498344562
  19. Jiangxin, L. Y. and Liqiao, F., "Isight parameter optimization and application", 2012, pp. 144-156.
  20. YU, X. Q., YAO, W. X., XUE, F., MU, X. F., LIU, K. L. and HUANG, A. F., "A study on the Requirements for the Framework of Multidisciplinary Design Optimization", Mechanical science and technology, Vol. 23, No. 3, 2004, pp. 286-289.