한국항공우주학회지 (Journal of the Korean Society for Aeronautical & Space Sciences)

  • 제44권5호
  • /
  • Pages.455-462
  • /
  • 2016
  • /
  • 1225-1348(pISSN)
  • /
  • 2287-6871(eISSN)
한국항공우주학회 (The Korean Society for Aeronautical and Space Sciences)
권호 표지
DOI QR코드

DOI QR Code

MEMS 기반 흑체 시스템의 온도 균일도 및 추정 정확도의 수치 해석적 검토

Numerical Investigation of Temperature Uniformity and Estimation Accuracy for MEMS-based Black Body System

  • 투고 : 2016.02.26
  • 심사 : 2016.04.28
  • 발행 : 2016.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

적외선 검출기와 같은 우주용 영상센서는 작동 유무 및 시간경과에 따라 센서의 응답특성이 변하기 때문에 영상품질이 저하된다. 이러한 영상센서의 비균일 응답특성을 보정하기 위하여 궤도상에서 보정용 흑체시스템을 이용하여 주기적인 보정을 실시 할 수 있도록 해야 한다. 본 논문에서는 저온에서 고온에 이르는 다양한 기준온도에서의 높은 온도균일도 확보 및 흑체의 대표표면온도 추정이 용이하고, 초경량, 저전력, 고정밀도의 흑체 시스템을 구현하기 위해 MEMS(Micro Electro Mechanical Systems)기반의 흑체시스템을 제안하였으며, 열해석을 통해 성능을 입증하였다.

Output Characteristics of the spaceborn image sensor such as infrared(IR) sensor are varied according to time elapses and sensor repetition on/off operation. As a result, the quality of IR sensor image is decreased. Therefore, spaceborne image sensor require a periodic calibration using a black body system by correcting a non-uniformity of the sensor. In this paper, we proposed a MEMS-based black body system that can implement the high temperature uniformity at various standard temperatures ranging from low to high temperature and easily estimate the representative surface temperature. In addition, it has advantages lightweight, low-power and high accuracy. The feasibility of the proposed MEMS-based black body system was verified through the thermal analysis.

키워드

참고문헌

  1. Xiong, X., Chiang, K., Esposito, J., Guenther, B., and Barnes, B. "MODIS on-orbit calibration and characterization", Metrologia, 40, S89-S92, 2003. https://doi.org/10.1088/0026-1394/40/1/320
  2. Walton, C. C., Sullivan, J. T., Rao, C. R. N. and Weinreb, D. C. "Correction for Detector Nonlinearities and Calibration Inconsistencies of the Infrared Channels of the Advanced Very High Resolution Radiometer", Journal of Geophysical Resarch, Vol. 103, No. C2, pp. 3323-3337, February 15, 1998. https://doi.org/10.1029/97JC02018
  3. Bremer, J. C. "Alternative Blackbody Configurations for Infrared Calibration of Future GOES Imagers and Sounders", Proceedings of the SPIE, Vol. 4814, 2002..
  4. Ono. A. and Sakuma. F. "Preflight and In-Flight Calibration Plan for ASTER", Journal of Atmospheric and Ocean Technology, Vol.13, April, 1996.
  5. H. U. Oh., S. M. Shin., J. S. Hong., M. K., Lee. "On-Board Black Body Thermal Design and On-Orbit Thermal Analysis for Non-Uniformity Correction of Space Imagers", Journal of Korean Society for Aeronautical and Space Sciences, Vol. 38, No. 10, October 2010, pp.1020-1025. https://doi.org/10.5139/JKSAS.2010.38.10.1020
  6. Thermal Desktop User's Guide, Ver. 5.0, Network Analysis Associates, Tempe, AZ, 2006.
  7. SINDA/FLUINT User's Guide, Ver. 5.0, Network Analysis Associates, Tempe, AZ, 2006.
  8. Baroncini. M., et al., "Characterization of an embedded microheater for gas sensors application", Conference on Hsinchu, April 2001, pp.164-167.
  9. V.V. Vlassov, F. L. Sousa, A. P. C. Cuco, A. J. S. Nelo, "New Concept of Space Radiator with Variable Emittance", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 32, No. 4, 2010, pp400-408 https://doi.org/10.1590/S1678-58782010000400001
  10. J. S. Kang, Y. H. Jung, S. W. Yang, E. E. Kim, "Design Verification of Thermal Control Performance of Electronics for Small Electro-Optics", Conference of Korean Society for Aeronautical and Space Sciences, 2009.4, pp734-737
  11. M. H. Lee, D. W. Kim, K. L. Hwang and Y. K. Chang, "Space Simulation Test and Thermal Verification of HAUSAT-2 STM by Using Surface Heaters", Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 33, Nov. 2005, 11, pp.106-114..
  12. S. T. Lee, S. H. Lee, Y. J. Choi, J. H. Lew, "Development of Attitude Control Thruster for KOMPSAT", Journal of The Korean Society of Propulsion Engineers, Vol. 1, Feb., 1997, pp.67-73
  13. H. U. Oh, S. M. Shin, "Numerical study on the thermal design of on-board blackbody", Journal of Aerospace Science and Technology, 18, Mar., 2011, pp25-34.