Journal of Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회논문집)

Korean Society of Coastal and Ocean Engineers (한국해안·해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Reliability Analysis of Tripod Support Structure for Offshore Wind Turbine using Stress Concentration Factor

응력집중계수를 이용한 해상풍력터빈 트라이포드 지지구조물의 신뢰성해석

  • Lee, Sang Geun (Dept. of Ocean Science and Engineering, Kunsan National University) ;
  • Kim, Dong Hyawn (Dept. of Ocean Engineering, Kunsan National University)
  • Received : 2015.09.01
  • Accepted : 2016.04.25
  • Published : 2016.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Reliability analysis of tripod support structure for offshore wind turbine was performed. Extreme distribution function of peak response due to wind and wave loads was estimated by applying peak over threshold(POT) method. Then, stress based limit state function was defined by using maximum stress of support structure which was obtained by multiplying beam stress and concentration factor. The reliability analysis result was compared when maximum stress was calculated from shell element. Reliability index was evaluated using first order reliability method(FORM).

응력집중계수를 이용하여 해상풍력발전기 트라이포드 지지구조물에 대한 신뢰성 해석을 수행하였다. 파랑과 풍하중의 극치분포함수는 POT방법을 사용하여 동적응답을 분석함으로써 추정되었다. 일계신뢰도법을 사용하여 신뢰성해석을 수행하였으며, 한계상태함수는 지지구조물의 이음부에서 발생하는 응력을 기반으로 정의하였다. 보 요소에서 계산된 응력에 응력집중계수를 곱하는 방법과 판 요소를 사용하여 계산하는 두 가지 방법으로 최대응력을 계산하여 신뢰성 해석을 수행하고 결과를 비교 분석하였다.

Keywords

References

  1. Agarwal, Puneet., 2008. Structural reliability of offshore wind turbines. PhD Thesis. The University of Texas at Austin.
  2. Ansys, Inc., 2009. Ansys User's Manual, Ver. 12.0.
  3. American Petroleum Institute(API), 2007. Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms-Working Stress Design.
  4. Box, G.E. and Wilson, K.B. (1951). On the experimental attainment of optimum conditions.Journal of the Royal Statistical Society. Series B (Methodological), 13(1), 1-45.
  5. Butterfield, S., Musial, W., and Scott, G., 2009. Definition of a 5-MW reference wind turbine for offshore system development. Golden, CO: National Renewable Energy Laboratory.
  6. Cheng, P.W., 2002. A reliability based design methodology for extreme responses of offshore wind turbines. Diss. TU Delft, Delft University of Technology.
  7. Det Norske Veritas(DNV), 2013. DNV-OS-J101.Design of offshore wind turbine structures. Det Norske Veritas: Hovik, Norway.
  8. Det Norske Veritas(DNV), 2012. DNV-RP-C207: Statistical Representation of Soil Data.Det Norske Veritas: Hovik, Norway.
  9. Garrad Hassan(GH), 2013. Bladed user manual. Garrad Hassan and Partners Limited Document.
  10. Hasofer, A.M. and Lind, N.C., 1974. Exact and invariant secondmoment code format.Journal of the Engineering Mechanics division, 100(1), 111-121.
  11. International Electrotechnical Commission (IEC), 2005. IEC 61400-1 Ed.3. Wind turbinesepart 1: design requirements.
  12. Jonkman, J. and Musial, W., 2010. Offshore code comparison collaboration (OC3) for IEA task 23 offshore wind technology and deployment.Contract,, 275-3000.
  13. Kim, D. H., & Lee, S. G., 2014. Reliability analysis of offshore wind turbine support structures under extreme ocean environmental loads.Renewable Energy,, 161-166.
  14. Lee, M.M.K., 1999. Strength, stress and fracture analyses of offshore tubular joints using finite elements. Journal of Constructional Steel Research, 51(3), 265-286. https://doi.org/10.1016/S0143-974X(99)00025-5
  15. Morison, J.R., Johnson, J.W., and Schaaf, S.A., 1950. The force exerted by surface waves on piles.Journal of Petroleum Technology, 2(05), 149-154. https://doi.org/10.2118/950149-G