DOI QR코드

DOI QR Code

Recent Study of Technical Development for High Efficient Brazing

최신의 고능률 브레이징 기술개발 동향

  • 유호천 (한국과학기술정보연구원 ReSEAT 프로그램)
  • Received : 2015.11.09
  • Accepted : 2016.01.13
  • Published : 2016.04.30

Abstract

Recent developing tendency for technologies of high efficient brazing are studied by searching of NDSL, Science Direct, KIPRIS, PCT and so on. Active metal brazing, arc brazing, fluxless brazing, brazing with low melting point, reactive air brazing, laser brazing, laser droplet brazing are investigated. By optimal selecting of the above mentioned technologies, it needs to investigate an economical metallurgical design and the advanced brazing methods. To improve the embrittlement of intermetallic compound at brazing interface, it must be studied the inexpensive variant metals including nonmetals and the heat sources(MIG, TIG, Laser) by hybrid techniques.

Keywords

References

  1. NHK Spring Co., Ltd., Brazing material for bonding in atmosphere, bonded article and current collecting material, WO2011/142262
  2. SeHo Kee, Joining of Ceramic and Metal using Active Metal Brazing, Journal of the Micro-electronics & Packaging Society, 18(3) (2011), 1-7
  3. Tanaka Kikinzoku Kogyo K. K : Active metal brazing material, WO2012/161148
  4. C.A. WALKER, Metal-nonmetal brazing for electrical, packaging and structural applications, Advances in Brazing (2013), 498-524
  5. W.J. Cho, Y.H. Cho, J.G. Yun and C.Y. Kang, Microstructure and Tensile Strength Property of Arc Brazed DP steel using Cu-Sn Insert Metal, Journal of KWJS, 31(1) (2013), 58-64
  6. Taiyo Nippon Sanso Corporation, Method for gas-shielded arc brazing of steel sheet, WO2010/038429
  7. M. Shome, Metal inert gas(MIG) brazing and friction stir spot welding of AHSS, Welding and Joining of Advanced High Strength Steels(AHSS), (2015), 137-165
  8. G. Qin, Z. Lei, Y. Su, B. Fu, X. Meng, S. Lin : Large spot laser assisted GMA brazing-fusion welding of aluminum alloy to galvanized steel. J. Mater. Process. Technol., 214 (2014), 2684-2692 https://doi.org/10.1016/j.jmatprotec.2014.06.011
  9. X. Meng, G. Qin, Y. Su, B. Fu, Y. Ji, Numerical simulation of large spot laser + MIG arc brazing-fusion welding of Al alloy to galvanized steel, Journal of Materials Processing Technology, 222 (2015), 307-314 https://doi.org/10.1016/j.jmatprotec.2015.03.020
  10. H. Zhang, J. Liu, J. Feng, Effect of auxiliary TIG arc on formation and microstructures of aluminum alloy/stainless steel joints made by MIG welding-brazing process, Trans. Nonferrous Met. Soc. China 24 (2014), 2831-2838 https://doi.org/10.1016/S1003-6326(14)63415-4
  11. Kanto Yakin Kogyo Co., Ltd., Method for brazing aluminum member, and brazing apparatus used therein, WO2012/057197
  12. Sumitomo Light Metal Industries, Ltd., Aluminum alloy brazing sheet, method for porducing same, and method for brazing heat exchanger formed of aluminum, WO2014/128880
  13. Furukawa-Sky Aluminum Corp., Brazing sheet for fluxfree brazing and method for producing same, WO2013/105637
  14. Sumitomo Light Metal Industries, Ltd., Aluminum alloy brazing sheet, WO2013/168669
  15. Nippon Light Metal Co., Surface brazing method of aluminum alloy material, WO2012/043030
  16. Nippon Light Metal Co., Method for surface brazing between aluminum alloy member and copper alloy member, WO2013/108465
  17. Nihon Superior Co., Ltd., Low-melting brazing filler metal, WO2015/053114
  18. Nihon Superior Co., Ltd., Low-melting point brazing material, WO2014/084242
  19. S. Y. Lee, Microstructures of Bonding Inter- faces after Semi-Solid Brazing of Aluminum Using A357 as a Filler Metal, Transactions of Materials Processing, 21(8) (2012), 506-511 https://doi.org/10.5228/KSTP.2012.21.8.506
  20. NHK Spring Co., Ltd., Brazing material for bonding in atmosphere, bonded article, and current collector material, WO2012/077733
  21. M. Ungers, R. Rolser, P. Abels, Hardware based analysis and process control for laser brazing applications, Physics Procedia, 41 (2013), 524-530 https://doi.org/10.1016/j.phpro.2013.03.111
  22. Z. Tang, T. Seefeld, F. Vollertsen, Laser brazing of aluminum with a new filler wire AlZn13Si10Cu4, Physics Procedia, 41 (2013), 128-136 https://doi.org/10.1016/j.phpro.2013.03.060
  23. M. Heitmanek, M. Dobler, M. Graudenz, W. Perret, G. Gobel, M. Schmidt, E. Beyer, Laser brazing with beam scanning: Experimental and simulative analysis, Physics Procedia, 56 (2014), 689-698 https://doi.org/10.1016/j.phpro.2014.08.076
  24. A. Mathieu, R. Shabadi, A. Deschamps, M. Suery, Dissimilar metal joining using laser, Optics & Laser Technology, 39 (2007), 652-661 https://doi.org/10.1016/j.optlastec.2005.08.014
  25. C. Mittelstadt, T. Seefeld, D. Reitemeyer, F. Vollertsen, Two-beam laser brazing of thin sheet steel for automotive industry using Cu-base filler material, Physics Procedia, 56 (2014), 699-708 https://doi.org/10.1016/j.phpro.2014.08.077
  26. Krishna P. Yagati, Ravi N. Bathe, Koteswararao V. Rajulapati, K. Bhanu Sankara Rao, G. Padmanabham, Fluxless arc weld-brazing of aluminium alloy to steel, Journal of Materials Processing Technology, 214 (2014), 2949-2959 https://doi.org/10.1016/j.jmatprotec.2014.06.017
  27. S. Stein, J. Heberie, F. J. Gurtler, K. Cvecek, S. Roth, M. Schmidt, Influences of nozzle material on laser droplet brazing joints with Cu89Sn11 preforms, Physics Procedia, 56 (2014), 709-719 https://doi.org/10.1016/j.phpro.2014.08.078
  28. A. Jeromen, A. Kuznetsov, E. Govekar, Laser droplet generation from a metal foil, Physics Procedia, 56 (2014), 720-729 https://doi.org/10.1016/j.phpro.2014.08.079
  29. C. Held, U. Quentin, J. Heberle, F.J. Gurtler, M. Weigl, M. Schmidt, Laser droplet brazing for the electrical contacting of composite materials with integrated active elements, Physics Procedia, 39 (2012), 585-593 https://doi.org/10.1016/j.phpro.2012.10.077
  30. U. Quentin, J. Heberle, C. Held, M. Schmidt, Laser droplet brazing for electrical contacting of composite materials with integrated active elements, Procedia Materials Science, 2 (2013), 181-188 https://doi.org/10.1016/j.mspro.2013.02.022
  31. Kanto Yakin Kogyo Co., Ltd., Method for brazing aluminium member, and brazing apparatus used therein, WO 2012/057197
  32. Harima Chemicals, Incorporated, Brazing composition, tube for heat exchanger, and heat exchanger, WO2014/065074
  33. R. Beeranur, K.K. Waghmart, R.K. singh, Characterization of vacuum brazing of SS 304 and alumina ceramic with active brazing alloy, Procedia Materials Science, 5 (2014), 969-977 https://doi.org/10.1016/j.mspro.2014.07.385
  34. Daiichi Kigenso Kagaku Kogyo Co., Ltd., Flux for brazing aluminum materials, WO 2013/008731
  35. M.Y. Lee, S.W. Kim, Ali M. Nasiri, Norman Y. Zhou, Effects of the Types of Coating on the Laser Brazing Characteristics of Dissimilar Joints between Mg Alloy and Steel Sheet, Journal of KWJS, 31(4), (2013), 275-280
  36. C.Y. Gang, Trend on Research TLP Bonding of Ni and Ni base Superalloy for high temperature Heat Exchanger, Journal of KWJS, 30(6), (2012), 507-512